What are the body dimensions of the Bora?

2 Answers
BennettRose
09/08/25 3:05am
The body dimensions of the Bora are 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. Different cars have different body dimensions. The Audi Q2L is an off-road model with a body length of 4191mm, a width of 1794mm, a height of 1508mm, and a wheelbase of 2601mm. The Audi Q5 has body dimensions of 4629mm in length, 1880mm in width, and 1650mm in height. The domestically produced Audi Q5L has dimensions of 4761mm in length, 1891mm in width, and 1659mm in height, with a wheelbase of 2908mm, which is 88mm longer than the overseas model. The impact of body dimensions on cars: Generally, larger body dimensions mean a longer front section of the vehicle. In the event of a frontal collision, the vehicle's front has a larger energy absorption and buffer zone, providing better protection for passengers. Larger and heavier vehicles usually offer better protection compared to smaller and lighter ones, especially during collisions, where the difference is more pronounced. However, larger-bodied vehicles often have heavier body weights. Factors affecting body dimensions: The size of the wheelbase directly affects the length of the car, which in turn affects the interior space. Compared to the short wheelbase of microcars, ordinary cars and mid-sized cars have longer wheelbases, resulting in relatively larger rear seating space where adults can sit comfortably.
Was this review help?
15
3
Share
BraydenLee
09/19/25 8:41am
I usually drive a Bora to commute to work, and often need to park in the city, so I'm very familiar with its body dimensions. The Bora is about 4663 mm long, roughly 4.66 meters, with a width of 1815 mm or around 1.82 meters, and a height of approximately 1473 mm, which is about 1.47 meters. These compact dimensions are very practical—turning and parking in urban alleys is effortless, and standard parking spaces are more than enough, unlike some bulkier SUVs. The trunk is also spacious enough; loading a stroller for weekend grocery runs is no problem at all. If you're also considering a daily commuter car, the Bora's dimensions strike a nice balance, ensuring comfortable cabin space without taking up too much room. The wheelbase is 2688 mm, so the rear seats are fairly roomy, making it comfortable for friends on road trips. When shopping for a compact car, size parameters are crucial—too small and the space feels cramped, too big and parking becomes a hassle. The Bora nails this balance perfectly.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

How Should Beginners Press the Accelerator?

When driving as a beginner, do not press the accelerator all the way down. Under good road conditions, gently press the accelerator first, then steadily increase pressure. Here are some related tips for pressing the accelerator: 1. Avoid Uneven Pressure: Do not press the accelerator with uneven force; the foot should apply steady pressure. 2. Do Not Press the Accelerator When Going Downhill: When going downhill, avoid pressing the accelerator. Keep your foot on the brake, ready to brake at any time. 3. Important Notes: Each car has different performance characteristics, and the sensitivity of the accelerator varies. Test the accelerator first when driving a new car. After getting the car, gently press the accelerator and gradually shift gears while observing the speed. If the car accelerates slowly or struggles to gain speed, the accelerator may be less responsive, requiring a gradual increase in pressure. Use the entire foot to press the accelerator and feel the pressure with the sole of your foot. Whether pressing lightly or firmly, the toes and heel cannot accurately sense the pressure—only the sole can gauge the appropriate force.
4
1
Share

How to Quickly Start a Manual Transmission Car?

If you don't press the accelerator slightly when starting on an uphill, the engine may stall due to insufficient idle speed to move the vehicle. During the starting process, avoid keeping the clutch in a semi-engaged state while pressing the accelerator for too long. Feel free to release the clutch pedal and press the accelerator to start. Slowly release the clutch pedal until the vehicle begins to shake, then stop lifting the clutch pedal further to prevent stalling. When starting, quickly release the clutch until the vehicle reaches a semi-engaged state, then hold the clutch steady. Quickly release the brake with your right foot to provide more power for climbing the slope.
3
4
Share

How to Operate the Electronic Gear Lever of Boyue?

Depress the brake pedal, press the one-button start to ignite the vehicle, then depress the brake pedal again, hold the button in front of the gear lever, push it forward to engage the N gear. Continue to depress the brake pedal, hold the button in front of the gear lever, push it forward to engage the R gear. Depress the brake pedal, hold the button in front of the gear lever, pull it backward to engage the D gear. In D gear, pull the gear lever to the left once to enter the manual mode M gear. In manual mode M gear, push forward once to upshift, and pull backward once to downshift.
20
5
Share

How to Change Windshield Washer Fluid in Winter?

If it is the same brand of windshield washer fluid, there is no need to spray out the summer windshield washer fluid. You can directly add the winter windshield washer fluid, and they can be mixed together. If it is not the same brand, you should first drain the summer windshield washer fluid completely, then pour in the winter windshield washer fluid. As for clearing out the summer windshield washer fluid, simply press and hold the windshield washer button until it is all sprayed out. Locate the filler cap with the washer symbol (usually a blue cap), open it, and pour in the windshield washer fluid.
7
3
Share

Car Formaldehyde Removal Process?

Wear protective masks, gloves and work clothes; clean the interior of the car thoroughly, and remove all interior items such as floor mats, seat cushions, trunk mats, pillows, and seat covers. The construction process follows the principle of from top to bottom and from front to back. And differentiated treatment is carried out according to different materials. Use formaldehyde remover on car interiors and accessories to dissolve chemical pollutants deeply inside and sterilize and deodorize. Perform aldehyde removal treatment on floor mats, seat cushions and other interior items. And maintain good ventilation, after completely drying, perform secondary spraying on the car and interiors.
3
0
Share

How to Use the Defogging Button in the Car?

Window defogging buttons with a front window-shaped icon indicate front window defogging and defrosting, while those with a rectangular frame icon indicate rear window defogging and defrosting. Simply click to use. More related information is as follows: 1. Proper Defogging: Fogging on vehicle windows is a common issue that can easily lead to accidents due to reduced visibility. Proper use of the window defogging function can effectively reduce traffic accidents caused by fogging. 2. Precautions: When the weather is extremely humid, do not use the defogging mode while the air conditioning is operating. The temperature difference between the outside air and the windshield can cause fogging on the windshield surface, obstructing visibility. When the humidity inside the car is high, windows are prone to fogging. Turning on the A/C switch effectively defogs the windshield by dehumidifying the air from the vents. When defogging is activated, the dehumidification function works, and the fan speed increases. If the air recirculation mode is used, set the air recirculation button to external circulation mode (can be automatically switched). Increasing airflow and raising the temperature can quickly defog the windshield and front side windows. Pressing the defogging button again while defogging the windshield returns to the previous mode.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.