What are the body dimensions of the Binyue?

1 Answers
VonBraxton
07/30/25 7:43am
The body dimensions of the Binyue are length 4330mm, width 1800mm, and height 1609mm, as per official data. The length of the Binyue refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The Binyue is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 141PS, a maximum torque of 235Nm, and a maximum power of 104kW, paired with a 6-speed manual transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
Was this review help?
15
3
Share
More Forum Discussions

How to Measure the Condition of an Ignition Coil?

The testing method for the ignition coil is as follows: 1. Set the vehicle's ignition switch to the "ON" position. Then unplug the ignition coil connector, use one end of the multimeter to measure pin 3 and the other end to measure the ground wire. If the voltage between the pin and the ground wire is around 12V, proceed to the next step; if not, check the wiring. 2. Unplug the ignition coil connector, use one end of the multimeter to measure pin 1 and the other end to measure pin 5# of the ECU to check for any short circuits or open circuits. If any are found, check the wiring; if not, proceed to the next step. 3. Unplug the ignition coil connector, use one end of the multimeter to measure pin 2 and the other end to measure pin 2# of the ECU to check for any short circuits or open circuits. If any are found, check the wiring; if not, proceed to the next step. 4. Use the multimeter to measure whether the resistance of the sensor's primary coil is 0.9Ω. If yes, proceed to the next step; if not, replace the ignition coil. 5. Use the multimeter to measure whether the resistance of the sensor's primary coil is 14.5Ω. If yes, proceed to the next step; if not, replace the ignition coil.
19
1
Share

What Does the First Maintenance of a Motor Vehicle Include?

What Does the First Maintenance of a Motor Vehicle Include? The first maintenance of a motor vehicle includes: 1. Changing the engine oil, oil filter, and air filter; 2. Checking the gap and wear of brake pads and brake discs; 3. Tightening the bolts of various systems; 4. Inspecting and adjusting the drive belt; 5. Checking and adjusting tire balance and alignment; 6. Inspecting lights, battery, and shock absorbers. The purposes of the first maintenance are: 1. Ensuring the vehicle is in good performance condition; 2. Effectively improving vehicle efficiency and reducing the consumption of parts and tires; 3. Enhancing driving safety; 4. Preventing vehicle breakdowns; 5. Reducing noise and environmental pollution; 6. Maintaining a clean vehicle appearance and preventing damage.
20
4
Share

What does Corolla S-CVT mean?

Corolla S-CVT is an improved version of the CVT transmission, inheriting the advantages of CVT while addressing its shortcomings. The following are the pros and cons of the S-CVT transmission: 1. Advantages: The transmission has no gear structure, resulting in a linear power output without any jerking during gear shifts, providing a very smooth driving experience; the gear settings are relatively free, making it easier to achieve a balance in terms of performance, speed ratio, fuel consumption, and exhaust emissions. 2. Disadvantages: High maintenance costs, and improper operation can easily lead to issues; the transmission chain has limited load-bearing capacity, and the chain is prone to slipping when the vehicle is climbing steep slopes or carrying excessive loads.
7
5
Share

What are the requirements for setting up fire lanes?

The following details the requirements for setting up fire lanes: 1. Fire lanes: The clear width and height should not be less than 4.0 meters, and the slope of the open space for fire trucks to park should not exceed 3%. Pipelines and culverts on fire lanes should be able to withstand the pressure of large fire trucks. 2. Circular fire lanes: There should be at least two connections with other lanes. 3. Dead-end fire lanes: A turning lane or turning area should be provided. The area of the turning area should not be less than 12m x 12m, and for high-rise buildings, it should not be less than 15m x 15m. The turning area for large fire trucks should not be less than 18 x 18 square meters.
13
3
Share

Why can't Toyota Corolla be used for Didi?

Registration requires a C1 or higher driver's license with at least three years of driving experience; the Corolla must be less than eight years old. Below are the relevant details: 1. Regional regulations: Some regions only require a vehicle with a base price of over 70,000 RMB to register for Didi, while others prohibit seven-seater commercial vehicles from registering due to their excessive wheelbase, which does not meet the registration standards. All eligible models must be listed in the franchise model list. 2. Requirements for Didi: Own a locally licensed seven-seater vehicle with a base price of over 70,000 RMB; the vehicle must be less than eight years old with mileage under 100,000 kilometers; male drivers aged 21-60 and female drivers aged 21-50, in good health with high safety awareness; hold a C2 or higher driver's license with at least one year of driving experience.
2
4
Share

Why does my vehicle still show overdue inspection despite being exempt?

Belongs to the exempt vehicle whose period has expired but has not yet collected the inspection label, and cannot be driven on the road. The following details the frequency of inspections for different vehicle types: 1. Non-operational small passenger vehicles: The first 6 years require inspection every 2 years, from the 7th to the 15th year require annual inspection; after 15 years, inspection is required every 6 months. 2. Non-operational medium and large passenger vehicles and trucks: The first 10 years require annual inspection, from the 11th year onward, inspection is required every 6 months. 3. Operational passenger vehicles: The first 5 years require annual inspection, from the 6th year onward, inspection is required every 6 months.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.