···
Log in / Register

What are the body dimensions of the Beijing BW007?

3 Answers
EmersynFitz
07/29/25 7:37pm
Beijing BW007's body dimensions are 4595mm in length, 1828mm in width, and 1830mm in height, with a wheelbase of 2600mm. The Beijing BW007 is available in seven colors: Sky Black, Police Blue, Inca Blue, Toyota Green, Bright Silver, Alpine White, and Agate Red. In terms of appearance, the Beijing BW007 features a rugged style, with an overall design highly consistent with the BAIC Yusheng 007. The Beijing BW007 has an approach angle of 32 degrees, a departure angle of 29 degrees, and a minimum ground clearance of 200mm. In terms of the powertrain, the Beijing BW007 is equipped with a 2.0L naturally aspirated engine and a 2.0T turbocharged engine, both paired with a 5-speed manual transmission.
Was this review help?
17
5
Share
PaisleeFitz
08/14/25 2:47pm
I previously drove the Beijing BW007 in person, and the body dimensions left a strong impression on me—approximately 4.75 meters in length, 1.93 meters in width, and 1.76 meters in height, with a wheelbase of around 2.8 meters. These dimensions place it on the larger side of the SUV spectrum. The interior space is incredibly spacious, making it perfect for family outings. The rear legroom is generous, and the trunk can easily fit several suitcases, making short trips stress-free. However, driving in the city can be challenging due to its nearly two-meter width—navigating narrow alleys or parking in tight spots often requires extra caution, especially when relying on the rearview camera for assistance. Fuel efficiency isn’t its strong suit, averaging 11-12L/100km, though it performs steadily on highways with low wind resistance, which somewhat offsets the drawback. For off-roading, its size offers decent passability, handling mild rough terrain without issue, though it feels a bit cumbersome when turning. Overall, I find its dimensions strike a balance between benefits and challenges, making it well-suited as a family vehicle.
Was this review help?
13
5
Share
Expand All
Frederick
10/15/25 6:20am
I've thoroughly studied the body dimensions of the Beijing BW007: length 4752mm, width 1933mm, height 1760mm, and a wheelbase of 2800mm. This size design takes driving stability into account, with the width ensuring strong grip during high-speed driving and reduced body roll during turns, significantly enhancing safety. The long wheelbase provides ample interior space, allowing five passengers to stretch their legs comfortably without fatigue on long journeys. The downside is that the large size affects maneuverability in urban areas, with a larger turning radius making operations slightly slower, and requiring spacious parking spots. The fuel consumption is moderate at around 12L/100km, and the drag coefficient is low due to the reasonable size, making it more fuel-efficient at high speeds. The size also impacts modification potential, making it easier to fit larger tires or add equipment, but weight distribution must be considered. For daily driving, the dimensions offer a sense of security and practicality.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Does the Wuling Hongguang Mini have one or two reverse lights?

Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
14
5
Share

Does replacing the oil temperature sensor require removing the transmission?

Replacing the oil temperature sensor does require removing the transmission. The transmission oil temperature sensor is installed on the valve plate inside the transmission oil pan. Its main function is to detect the temperature of the automatic transmission hydraulic oil. When removing the transmission, be careful not to pull hard on the wiring harness on the valve plate. The testing method for the oil temperature sensor is as follows: 1. Measure the resistance value of the oil temperature sensor: Remove the transmission oil temperature sensor, place the sensor in a beaker filled with water, heat the water in the beaker, and measure the resistance between the two terminals of the sensor at different temperatures. 2. Standard resistance value for the sensor: Compare the measured resistance value with the specified value. If the resistance value differs significantly from the specified value, it should be replaced.
8
4
Share

How often should the CVT transmission fluid be changed in the Nissan Qashqai?

Nissan Qashqai CVT transmission fluid generally needs to be replaced every 80,000 to 100,000 kilometers or every 5 to 6 years. Symptoms of deteriorated transmission fluid in the Nissan Qashqai: 1. Slipping: The engine speed increases, and slipping occurs under high-torque conditions such as uphill driving. 2. Oil leakage: Poor sealing of the transmission, possibly due to issues with gaskets or seals. 3. Jerking: The main cause may be deteriorated transmission fluid containing dirt or impurities. 4. Abnormal noises: Excessive debris or impurities in the transmission fluid. 5. Overheating: The dashboard will display a transmission fault warning light. 6. Stalling: The engine stalls when shifting from P to D gear. Possible failures include the solenoid valve, lock-up control valve, or input shaft speed sensor.
4
3
Share

Where to Get a Car Natural Gas Tank Inspection?

Local Special Equipment Inspection and Research Institute (Special Inspection Institute) gas tank inspection stations conduct cylinder inspections. Here are the relevant details: 1. Material Proof: For inspection, you need to bring the gas tank usage registration certificate from the oil-to-gas conversion, the gas tank factory qualification certificate, the gas tank installation supervision inspection certificate, the vehicle's driving license, and the owner's ID card to the Special Inspection Institute for inspection. For details, you can inquire by calling the local Special Inspection Institute. 2. Pressure Equipment: A gas tank is a type of pressure equipment with explosion hazards, and its contained medium is generally flammable, explosive, toxic, highly corrosive, etc. Its usage environment, due to characteristics like mobility, repeated refilling, non-fixed operators, and changing usage conditions, makes it more complex and harsh compared to other pressure vessels.
15
1
Share

How to Release the Audi Handbrake?

Audi electronic handbrake can be released by simply pressing down the electronic handbrake switch. Below is the related introduction: 1. Working Principle: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of the manual mechanical parking brake system, which realizes parking by clamping the friction between the brake shoes and the brake drum or between the friction pads and the brake disc. However, the control method is replaced by electronic buttons and motor actions instead of the original manual operation. Therefore, the full name of this system is the electronically controlled mechanical parking brake system. 2. Advantages: The advantages of the electronic parking brake system are that the parking brake handle is eliminated in the cabin, providing more design space for the overall interior styling. The parking brake is replaced by a button instead of the driver's effort to pull the parking brake handle, which is simple and labor-saving, reducing the operation intensity of the driver, especially female drivers.
17
3
Share

Where is the engine number located on a Volvo XC60?

Volvo XC60's engine number is located on the engine block. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license contains the engine number, usually printed on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will also state the engine number. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one unique engine number, and no two engines share the same number.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.