What are the body dimensions of the Baojun 530?

1 Answers
DiReese
07/30/25 1:59am
The Baojun 530 has a body length of 4690mm, width of 1835mm, height of 1750mm, a wheelbase of 2750mm, a fuel tank capacity of 52L, front track of 1554mm, and rear track of 1549mm. It is a compact SUV under the SAIC-GM-Wuling brand. The Baojun 530 is equipped with a 1.5T turbocharged engine, paired with a 6-speed manual transmission, delivering a maximum horsepower of 147 hp, a maximum power of 108 kW at 5200 rpm, and a maximum torque of 250 Nm between 2200 rpm and 3400 rpm. It features a MacPherson strut front suspension and a torsion beam rear suspension.
Was this review help?
4
0
Share
More Forum Discussions

What are the new regulations for deducting 9 points from a C1 driver's license?

There are two main points regarding the new regulations for deducting 9 points from a C1 driver's license: 1. Speeding: Driving at a speed exceeding 50% of the prescribed limit, specifically referring to driving a motor vehicle on roads other than highways or urban expressways at a speed exceeding 50% of the prescribed limit; 2. Driving time: Continuously driving medium-sized or larger passenger vehicles or hazardous material transport vehicles for more than 4 hours, or driving such vehicles for more than 4 hours without stopping for rest or with a rest period of less than 20 minutes, as well as accumulating more than 8 hours of driving time within 24 hours.
2
0
Share

Where is the emergency trunk release switch for the 2003 Passat?

The emergency trunk release switch for the 2003 Volkswagen Passat is located below the driver's door armrest, above the door storage compartment. Here is some relevant information about the Passat: 1. Introduction: The Passat is a mid-size sedan designed by Volkswagen AG of Germany. It is classified as a B-segment vehicle in Volkswagen's lineup. Since its debut in 1973, the Volkswagen Passat has dominated the global automotive market for over 40 years with its high safety standards, classic design, and top-tier manufacturing quality. 2. Vehicle Design: In terms of exterior styling, the new-generation Passat adopts Volkswagen's latest design philosophy - Fluid Rhythm. The light-rhythm front fascia design combines with flowing chrome trim, while Volkswagen's signature grille has been further evolved. The dot-matrix horizontal one-piece grille, dual-L rotary full-LED projector headlights, and more pronounced hood collectively form the new front fascia.
1
5
Share

Where is the MG6 engine produced?

The MG6 car engine is jointly developed by SAIC Group and General Motors, and is produced in SAIC's engine factory. The MG6 engine model is 18K4C, with a maximum power of 124kw, a maximum torque of 250Nm, a maximum power speed of 5500rpm, and a maximum torque speed of 170 Nm. The following methods can be used for daily maintenance of the MG6 engine: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, oil should be changed regularly based on usage conditions, and the oil quantity should be moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear.; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
13
3
Share

What are the steps to replace a BMW battery?

BMW key battery replacement steps are as follows: 1. Press the switch on the back of the key to remove the mechanical key. 2. Then use the mechanical key to open the key cover by inserting it into the slot next to the key and gently prying. 3. After opening the key cover, the old battery will be fully visible. 4. Use a small flat-head screwdriver to remove the depleted battery. 5. Insert the new battery, ensuring the "+" side faces up. 6. After installing the battery, reassemble the key. 7. Test the lock button and other functions to ensure they work properly. Here are some precautions: 1. Improper battery replacement may damage the car key. 2. Check the battery model before replacement. When purchasing a new battery, pay attention to its voltage, size, and specifications. 3. If you are unsure how to replace the battery, visit a 4S store for assistance. 4. Avoid using the key outside its operational range; excessive use beyond this range may cause the key to fail. 5. Exposure to magnetic fields can easily cause electronic key failure. 6. Excessive moisture on your hands may lead to key rust or even short circuits.
12
2
Share

What are the new regulations for annual vehicle inspection?

New regulations allow for early processing, generally permitting an advance of 90 days for annual inspection. According to Article 32 of the "Regulations on the Registration of Motor Vehicles" (Ministry of Public Security Order No. 102), vehicle owners may apply for an inspection compliance mark at the local vehicle management office up to three months before the expiration of the vehicle's inspection validity period. Required materials include: original vehicle license and road/bridge card, duplicate of compulsory traffic insurance, road/bridge ticket ("first copy in black"), copy of owner's ID card, and the vehicle. Below is relevant information on the time regulations for vehicle annual inspection: 1. Early inspection permitted: In addition to the regular scheduled annual inspection, vehicle owners can actually conduct an early inspection at the vehicle management office. This early inspection can be done up to three months in advance. It's important to note that the timing for vehicle annual inspection is not based on specific dates but rather calculated by month. 2. Reasonable time frame: Even if the vehicle inspection is conducted on the last day of September, it still falls within the reasonable time frame. However, if the inspection is delayed beyond September, conducting it afterward would become very troublesome.
1
4
Share

What is the fuel tank capacity of the 2021 CR-V?

The fuel tank capacity of the 2021 Honda CR-V is 53 liters, as officially announced by Honda Motor. The 2021 Honda CR-V requires 92-octane gasoline, with a fuel consumption ranging from 4.9 to 7.3L per 100 kilometers. A full tank can provide a driving range of approximately 726 to 1081 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the remaining fuel. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the calibrated tank capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to a safe fill level, leaving some space between the safe fill level and the tank opening. This extra space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.