What are the body dimensions of the Baojun 530?

How to Remove a Dash Cam?

For the removal of a clip-on rearview mirror dash cam without screws and the disassembly method of a dash cam, the steps are as follows: First, use a blade or card-like item to pry open the front panel, then you can see the screw holes inside the dash cam. Use a screwdriver to remove the screws, and the display panel can then be detached. There are clips around it; gently pry them with a screwdriver to remove the panel. After removing the panel, you can see the circuit board. There are 4 screws in relatively hidden positions around the circuit board display. Once these are removed, the back cover can be taken off. Here is some relevant information about dash cams: The function of a dash cam: The video footage recorded by a dash cam can be used as evidence in traffic accidents or in cases of fraud attempts (like staged accidents), serving as favorable proof. It legally safeguards the driver's rights and helps avoid disputes. It also records the distance traveled by the vehicle.

15

3

Share

Can You Lock the Car Without Turning Off the Engine?

You cannot lock the car without turning off the engine. For safety reasons, the car should be turned off before locking it. The reasons why the car key does not respond when locking the car are: 1. There is strong magnetic field interference around the car; 2. The car has malfunctioned; 3. The battery is dead or has poor contact; 4. The antenna of the remote transmitter in the car is aging; 5. The time control module in the remote key is faulty. The solutions for when the car key does not respond when locking the car are: 1. Check the battery circuit or replace the battery; 2. Check for aging circuits; 3. If the remote key does not work, use the mechanical key to lock the car; 4. Check the lock block and the condition of open or short circuits in the control circuit; 5. Park the car in another location and try again to avoid magnetic field interference signals.

4

Share

What is the gap size of a car spark plug?

The normal gap of a spark plug is generally 0.6~1.3 millimeters. Spark plug replacement procedure: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the firing order, then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replace spark plugs every 40,000~60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the owner's manual. Platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km.

20

4

Share

What to Do If the Vehicle Stalls Suddenly While Driving?

If the car stalls suddenly while driving, depending on the road conditions at that time and if there is no emergency, you can slowly apply the brakes to prevent a rear-end collision. After the speed decreases, steer slowly to move the car to the roadside lane. Once parked at the roadside, turn on the hazard lights, set up the warning triangle, and call for a tow truck. Common causes of stalling are as follows: 1. Stalling due to carbon deposits: Especially at the electronic throttle, this is an intake system fault. When there is excessive carbon buildup at the throttle, releasing the accelerator while driving may cause the engine to stall, which often occurs in very old cars. However, this can be prevented. Normally, you may notice difficulty starting the engine, or even needing to press the accelerator to start it—these are signs of excessive carbon deposits at the throttle, which require timely cleaning. 2. Fuel supply failure: Usually caused by a damaged fuel pump, which cannot pump fuel. The fuel pump has a long lifespan, so damage typically occurs in older cars. Some fuel pumps fail while the car is parked, making it impossible to start, while others fail during driving. 3. Power supply failure: Usually caused by a damaged ignition coil, resulting in no high-voltage electricity to all spark plugs.

19

1

Share

Does Installing a Spoiler Increase Drag?

Installing a spoiler does increase the drag of a car. A car spoiler refers to the protrusion installed along the upper edge of the rear end of the car's trunk lid, and it is one of the components of aerodynamics. The primary purpose of installing a spoiler is to increase the downforce at the rear of the car, thereby reducing drag during driving to enhance the car's stability. This technology was initially used in racing cars. However, installing a spoiler on a car is considered illegal modification and is a violation of the law. The penalties and relevant regulations for illegal modifications are as follows: Penalties for Illegal Modification: Driving an illegally modified car on the road will result in the vehicle being impounded by the traffic management department of the public security authority, the illegal device being confiscated, and the owner being ordered to restore the vehicle to its original condition, along with a fine imposed according to the law. Relevant Regulations: For illegally modified cars, the traffic management department of the public security authority will not issue a safety technical inspection compliance mark. If the modification constitutes a violation of public security management, the public security authority will impose penalties such as fines or detention in accordance with the relevant provisions of the "Public Security Administration Punishment Law." When modifying your car, it is essential to apply for a modification registration with the traffic management department of the public security authority to ensure that the modified car can pass annual inspections and routine safety checks.

4

Share

How many cylinders does the Hongqi HS5 engine have?

4-cylinder 2.0T, 224 horsepower turbocharged engine is the engine equipped in the Hongqi HS5, paired with a 6-speed automatic transmission. The cylinder block and head are made of aluminum alloy, and the fuel supply method is direct injection. The four-cylinder, also known as a four-cylinder engine, is a machine capable of converting one form of energy into another. Its structure consists of the cylinder block, crankcase, cylinder head, and cylinder gasket components. The Hongqi HS5 is a mid-size SUV with a 5-door, 5-seat body structure. The vehicle dimensions are 4760mm in length, 1907mm in width, and 1700mm in height, with a wheelbase of 2870mm. The front and rear tire specifications are 235/60R18, and the spare tire is a non-full-size tire. The suspension uses MacPherson independent suspension and multi-link independent suspension. The engine model is CA4GC20TD32, which is a domestically developed engine that meets the China 6B emission standards. The maximum power is 165kw, the maximum torque is 340nm, and the maximum horsepower reaches 224.

10

5

Share

What are the body dimensions of the Baojun 530?

How to Remove a Dash Cam?

Can You Lock the Car Without Turning Off the Engine?

What is the gap size of a car spark plug?

What to Do If the Vehicle Stalls Suddenly While Driving?

Does Installing a Spoiler Increase Drag?

How many cylinders does the Hongqi HS5 engine have?

Is the Tharu's transmission a dry or wet dual-clutch?

What is the minimum ground clearance of the Peugeot 4008?

Can black-painted rims pass the annual vehicle inspection?

What is the actual fuel consumption of the Emgrand GL 1.4t?