What are the body dimensions of the Audi Q7?

1 Answers
VonEmilia
07/29/25 4:59pm
Audi Q7 has a body length, width, and height of 5086/1968/1716mm respectively, with a wheelbase of 3001mm. Below is additional information about the Audi Q7: 1. In terms of appearance, the Audi Q7 features a large hexagonal grille and arrow-shaped LED headlights, with a straight waistline running from front to rear; 2. In terms of power, it is equipped with two turbocharged engines: a 2.0TL4 and a 3.0TV6, paired with an 8-speed automatic transmission. The former has a maximum horsepower of 252PS, maximum torque of 370N·m, top speed of 233km/h, official 0-100km/h acceleration time of 7.1s, and a combined fuel consumption of 8.5L/100km as per the Ministry of Industry and Information Technology; 3. The latter has a maximum horsepower of 340PS, maximum torque of 500N·m, top speed of 250km/h, official 0-100km/h acceleration time of 5.9s, and a combined fuel consumption of 9.3L/100km as per the Ministry of Industry and Information Technology.
Was this review help?
8
2
Share
More Forum Discussions

BMW 3 Series Central Control Screen Black Screen?

Press and hold the volume adjustment button for about thirty seconds, and it will automatically shut down and then restart. Press and hold the power button for five seconds. If the screen does not light up and the power indicator light does not come on or flashes briefly and then turns off, the initialization is complete. Turn the device back on to resolve the black screen issue.
14
0
Share

How to Unlock a Baojun Steering Wheel Lock?

Depress the brake pedal, hold the steering wheel with your left hand and gently shake it, while simultaneously shaking and turning the key with your right hand to unlock. For keyless start models, the unlocking method without a key is roughly the same as with a key, except without inserting a key.
7
2
Share

How to disable the anti-theft system of Baojun 560?

The anti-theft light will flash once every 1 to 2 seconds, indicating that the engine anti-theft system is active and does not need to be disabled. If you need to disable it, simply unplug the tail light. First, disconnect the negative terminal of the car battery for about 10 seconds, and then reconnect the battery after the engine's protection data is cleared.
2
4
Share

How to Connect Bluetooth in Audi?

First, enable the Bluetooth function on both your mobile phone and the car's Bluetooth device, and set them to the mode of 【Visible to All】 or 【Detectable】. Search for Bluetooth devices on your phone, locate the car's Bluetooth name, and click to pair and connect. Follow the prompts to enter the corresponding pairing password, usually 【0000】 or 【1234】, to successfully complete the pairing.
13
1
Share

Audi Q5 Sunshade Initialization Settings?

Turn on the ignition. Press and hold the sunshade button on the roof to close the sunshade, maintaining this position throughout the standardization process (approximately 20 seconds). During standardization, the sunshade first closes completely, then moves backward about 200mm. After the sunshade closes again, the initialization process is complete. Release the sunshade button.
2
3
Share

How to Check Where a Vehicle is Sealed?

You need to bring relevant documents for on-site inquiry. For example, the owner of the motor vehicle can bring their ID card and vehicle license to the vehicle management office to check the records, or they can go to the court's enforcement division to check the records. If the person subject to enforcement actively fulfills the court's judgment, they can apply to the court to lift the seizure after fulfillment is completed.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.