What are the body dimensions of the Audi Q5L?

2 Answers
CameronAnn
07/29/25 12:01am
Audi Q5L's body dimensions are 4753mm in length, 1893mm in width, and 1659mm in height, with a wheelbase of 2908mm, making it a midsize SUV. The Audi Q5L is equipped with two types of engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. Both engines are paired with a 7-speed dual-clutch transmission. The low-power version of the 2.0-liter turbocharged engine has a maximum power of 140 kW and a maximum torque of 320 Nm. The high-power version of the 2.0-liter turbocharged engine delivers a maximum power of 185 kW and a maximum torque of 370 Nm.
Was this review help?
7
0
Share
LaKing
08/12/25 4:19am
I've been driving the Audi Q5L for quite some time and remember its dimensions clearly: the length is approximately 4.77 meters, or about 4770 millimeters, the width is 1.89 meters, the height is 1.66 meters, and the wheelbase is extended to 2.91 meters. This size design is quite practical—it's not too bulky for city driving, though you need to pay attention to corners when parking or reversing because the longer wheelbase results in a slightly larger turning radius. However, the precise steering system helps a lot. The nearly 1.9-meter width makes the car very stable on the highway, reducing the risk of rollover, and the spacious interior ensures that three adults can sit comfortably in the back. The 1.66-meter height is neither too high nor too low, so you don't have to worry about height restrictions when entering garages, and it's convenient for loading luggage or shopping. Additionally, the optimized drag coefficient makes long-distance driving fuel-efficient and quiet. Overall, it's a perfect balance of sportiness and comfort.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

Is It Necessary to Install a Shark Fin on a Car?

It is not necessary to install a shark fin on a car. If the shark fin is original, it may have advantages such as enhancing the car's communication signals and shielding static electricity. However, if it is installed later, the shark fin only serves a decorative purpose and has no other functions. Here is some information about shark fins: Shark fin antennas overcome the shortcomings of traditional telescopic rod antennas, whip antennas, and car glass antennas. They integrate all the functions of ordinary antennas using the latest electronic technology, including discharging static electricity, amplifying communication signals, reducing turbulence, and improving the accuracy of the GPS system. Additionally, they serve as FM radio antennas, GSM communication antennas, and GPS antennas.
6
5
Share

What Causes Abnormal Noises When Driving on Rough Roads?

Abnormal noises when driving on rough roads can be attributed to the following reasons: 1. Friction between car components: It may be caused by the friction sound from the fixed rubber sleeve of the suspension lateral stabilizer bar, or related components of the interior trim panel rubbing against each other. 2. Lack of lubrication in the steering column dust cover: Insufficient lubrication in the steering column dust cover can lead to dry friction sounds. Applying some grease inside the dust cover can eliminate the noise. 3. Abnormal noise from the steering column universal joint: The front end of the steering column is equipped with a universal joint. Lack of lubrication in the universal joint can cause abnormal noises, which can be resolved by lubricating the universal joint.
20
2
Share

Should the Negative Terminal of the Car Battery Be Disconnected When the Car Is Not Used for a Long Time?

When a car is not used for a long time, it is necessary to disconnect the negative terminal of the battery to prevent battery drain. Generally, if the car is not used for more than a month, the negative terminal should be disconnected. If the period is not very long, there is no need to disconnect the negative terminal. Here is some information about car batteries: 1. A car battery is a type of battery, also known as a storage battery, which works by converting chemical energy into electrical energy. 2. The commonly referred-to car battery is a lead-acid battery, which mainly uses lead and its oxides as electrodes and sulfuric acid solution as the electrolyte.
11
0
Share

What is the maximum speed of the Corolla 12t on the highway?

The Corolla 12t can reach a maximum speed of 120 km/h on the highway, but traffic regulations must be observed. Factors affecting maximum speed: The maximum speed is largely related to the road surface and is also subject to the road's speed limit. Discussing maximum speed alone is not meaningful. Speed regulations: Motor vehicles must not exceed the speed limit signs on the road. On roads without a centerline, the speed limit is 30 km/h in urban areas and 40 km/h on highways. On roads with only one lane in the same direction, the speed limit is 50 km/h in urban areas and 70 km/h on highways. When turning, the maximum speed of a motor vehicle must not exceed 30 km/h.
12
4
Share

What is the issue when the fault light of Chery E3 is on?

Chery E3 engine fault light may be on due to sensor failure, intake pressure sensor failure, or unstable circuit in the engine fuel injection system. Sensor failure: The system reports a fault code, but it works normally, which may be caused by an operation beyond the control range of the computer. Solution: You can first clear the fault code and then check if it reappears. Unstable circuit in the engine fuel injection system: Loose or broken connections in the engine fuel injection system can also cause the fault light to come on. Solution: It is recommended to go to a 4S repair shop for inspection and repair.
14
5
Share

What is the reason for the lack of clutch in the Baojun 730?

Baojun 730 lacks clutch for the following reasons: Lack of lubrication in the actuator: Due to insufficient lubrication in the clutch system's operating mechanism, the clutch stroke is too small, leading to abnormal clutch return. Check the transmission: If abnormal noise persists after lubrication, this may indicate a transmission malfunction, requiring a thorough inspection and possible repair. Excessive wear: Excessive wear of the clutch, constantly pressing the clutch will keep the release bearing in high-speed rotation, reducing the bearing's lifespan. Pressure plate spring breakage: Severe abnormal noise when pressing the clutch pedal may be caused by a broken pressure plate spring in the clutch.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.