···
Log in / Register

What are the body dimensions of the Aion LX?

1 Answers
RiverAnn
08/31/25 4:09am
Aion LX's body dimensions are 4786mm in length, 1935mm in width, and 1685mm in height, according to official data. The length of the Aion LX refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane. The Aion LX is equipped with a permanent magnet synchronous motor across all variants, available in 184 horsepower, 204 horsepower, and 408 horsepower versions. In terms of range, the Aion LX offers versions with 503 km, 650 km, and 600 km. National regulations stipulate specific requirements for vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle excludes side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to meet the requirements of public road usage.
Was this review help?
6
4
Share
More Forum Discussions

How many kilometers can a barrel of urea run?

A 32-liter barrel of urea can run approximately 2300 kilometers. The specific consumption is as follows: Specific consumption: Taking a heavy-duty truck equipped with a 32-liter urea tank as an example, the vehicle consumes about 100 liters of urea every 7200 kilometers, which means it needs to be refilled every 2300 kilometers; this is roughly equivalent to 3-5% of fuel consumption. To avoid running out of urea while driving, it is recommended to carry 1-2 barrels of 10-liter packaged Jieshi Blue automotive urea solution. Due to various significant factors such as the vehicle's fuel consumption, diesel quality, urea solution quality, and engine condition, the difference in urea consumption can vary greatly.
13
5
Share

Why Does a Car Shake at Idle?

Here are the reasons why a car shakes at idle: 1. Severe engine carbon deposits: The most common cause of car shaking due to engine carbon deposits is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon inside the engine, the gasoline sprayed by the cold-start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start. In this situation, the car only starts easily once the carbon deposits are saturated with gasoline. After starting, the gasoline adsorbed on the carbon deposits is sucked into the cylinder by the engine's vacuum and burned, making the air-fuel mixture too rich. The engine's combustible mixture alternates between being too lean and too rich, causing the idle to shake after a cold start. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Problems with the ignition system or poor performance of the spark plugs can also lead to such faults.
11
1
Share

What is the difference between metallic paint and non-metallic paint?

Non-metallic paint, also known as solid color paint or standard paint, is the basic type of paint. Metallic paint typically includes aluminum flakes, creating a sparkling effect known as silver metallic paint. By incorporating metal powder, metallic paint gives the coated surface a more dazzling appearance. Metallic paint is more expensive than non-metallic paint. Additional details are as follows: 1. Introduction to metallic paint: Also called metallic flake paint, it is a popular automotive topcoat. Its paint base contains fine aluminum particles that reflect light, creating a sparkling metallic effect. By adjusting the shape and size of the aluminum particles, the brightness of the metallic finish can be controlled. A clear coat is applied over the metallic paint for protection. 2. Characteristics of metallic paint: The key features of metallic paint are not only its high brightness but also its significantly higher hardness compared to standard paint, making it more resistant to scratches. Nowadays, most cars, especially high-end models, use metallic paint, which has become a trend. However, metallic paint is considerably more expensive than standard paint of the same type.
6
5
Share

What is the actual fuel consumption per 100 kilometers for the BMW 520?

The actual fuel consumption per 100 kilometers for the BMW 520 is approximately 9.5 liters. Factors that increase vehicle fuel consumption: Low tire pressure or severe tire wear; frequently carrying heavy loads; poor road conditions; driving habits such as frequent braking, frequent starts, and unnecessary revving; substandard oil quality; severe carbon buildup in the intake and exhaust systems, fuel lines, injectors, and throttle body; malfunctioning catalytic converter, sensors, or spark plugs can all lead to excessive fuel consumption. Methods to reduce fuel consumption: Start slowly and press the accelerator gently; gentle acceleration and braking, brake early; maintain proper tire pressure; regularly organize the trunk to reduce unnecessary weight.
18
4
Share

What is the break-in period for the Geely Binrui in kilometers?

Geely Binrui's break-in period is 3,000 kilometers. Introduction to the car break-in period: Depending on the frequency of car usage, the duration of the break-in period may vary. The car reaches its most balanced state after the first maintenance, at which point driving becomes the smoothest. Precautions during the break-in period for Geely Binrui: During the break-in period, try to reduce the vehicle's self-weight and keep the load below 70% of the vehicle's capacity. Otherwise, it may put pressure on the tires and accelerate tire wear. Also, during the break-in period, it is advisable to use high-quality fuel to keep the engine in a good working condition. This not only speeds up engine lubrication but also extends the engine's lifespan.
16
5
Share

What do China 5 and China 6 mean?

China 5 and China 6 are vehicle emission standards. Here are the specific details about vehicle emission standards: 1. Emission gas regulations: They specify the content of harmful gases such as carbon monoxide, PM, and soot emitted from vehicle exhaust. 2. Meaning of the numbers: The higher the number, the more environmentally friendly the vehicle's exhaust is. Below is extended information on the differences between China 5 and China 6: 1. Standard level: The China 6 standard is an upgrade of the China 5 standard and will become one of the strictest standards globally. 2. Pollutants: Compared to China 5, China 6 strictly controls the emission limits of pollutants. Under the exclusion of operating conditions and test influences, the carbon monoxide emissions of gasoline vehicles are reduced by 50%, the emission limits of total hydrocarbons and non-methane hydrocarbons are decreased by 50%, and the nitrogen oxide emission limits are tightened by 42%.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.