What are the body dimensions of the Aion LX?

1 Answers
McQuinn
07/30/25 4:55am
Aion LX has body dimensions of 4786mm in length, 1935mm in width, and 1685mm in height, making it a mid-size SUV. In terms of power, the Aion LX is equipped with a permanent magnet synchronous motor across all variants, available in versions with 184 horsepower, 204 horsepower, and 408 horsepower. Regarding range, the Aion LX offers three versions with ranges of 503km, 650km, and 600km. For safety features, the Aion LX comes standard with front and side airbags, front and rear head airbags, tire pressure monitoring system, ISOFIX child seat anchors, ABS anti-lock braking system, electronic brakeforce distribution, brake assist, traction control, and electronic stability control. In terms of other features, the Aion LX includes standard LED headlights, GPS navigation system, among others.
Was this review help?
12
3
Share
More Forum Discussions

What causes a motorcycle to automatically stall and fail to start after overheating?

Motorcycles may automatically stall and fail to start after overheating due to electrical circuit malfunctions or spark plug failures. Here is more information about spark plugs: 1. The spark plug is a crucial component of the engine's ignition system. At the end of the compression stroke, the spark plug releases an electrical spark that ignites the combustible air-fuel mixture in the cylinder. After the mixture burns, it pushes the piston downward, allowing the engine to generate power. 2. Spark plugs are wear-and-tear parts that require regular replacement. As mileage increases, the electrode gap of the spark plug also widens. 3. If the spark plug's electrode gap becomes too large, it can result in insufficient ignition energy, affecting the combustion process inside the engine. If the spark plug is damaged, it cannot produce a spark, causing the engine to stall.
1
1
Share

Can a Car Move Without Releasing the Handbrake?

Can a car move without releasing the handbrake? Yes, it can, but driving with the handbrake engaged causes significant wear on the handbrake pads. The most immediate effects include accelerated wear on the brake discs, hardening of the brake pads due to overheating, elongation of the handbrake cable, and a consequent decline in braking performance. Some drivers might even notice a burning smell, and in severe cases, smoke may emerge from the rear of the vehicle. Prolonged driving with the handbrake engaged can lead to the brake calipers seizing, brake fluid leakage, an increase in brake fluid temperature, and ultimately, a complete loss of braking function. The handbrake, also known as an auxiliary brake, is primarily used to keep the vehicle stationary when parked, preventing it from rolling. If the handbrake is engaged, the rear wheels will struggle to move. Using the handbrake during a turn while driving can induce a drifting effect. In emergencies, the handbrake can serve as an alternative brake to mitigate further risks. How the handbrake works: The vehicle's own weight, combined with the engine's power, drives the front wheels and generates substantial inertia. If the driving wheels have enough power, they can overcome the friction from the rear brake discs and propel the rear wheels forward. Thus, when the vehicle's torque is sufficiently strong, engaging the handbrake can still allow the car to move a considerable distance. Developing good driving habits is essential. Before driving, always check if the handbrake is fully released. Additionally, pay close attention to the dashboard, which provides comprehensive information. Regularly monitoring the warning lights on the dashboard can help avoid driving with the handbrake engaged.
13
2
Share

Does the Wuling Hongguang S3 have an automatic transmission?

Wuling Hongguang S3 does not have an automatic transmission; the entire lineup is equipped with a 6-speed manual transmission. Below is a relevant introduction to the Wuling Hongguang S3: 1. The Wuling Hongguang S3 is a mid-size SUV under the Wuling brand. 2. It uses two engines in total, one is a 1.5-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. 3. The 1.5-liter naturally aspirated engine of the Wuling Hongguang S3 has a maximum power of 73 kilowatts and a maximum torque of 140 Newton-meters; the 1.5-liter turbocharged engine has a maximum power of 108 kilowatts and a maximum torque of 250 Newton-meters. 4. The front suspension of the Wuling Hongguang S3 uses a MacPherson independent suspension, and the rear suspension uses a spiral spring non-independent suspension.
15
2
Share

What are the steps to reset the maintenance light on a 2012 Chery Flagcloud 2?

The method to reset the maintenance light on the Flagcloud 2 is as follows: 1. Turn on the ignition switch and clear the odometer reading on the instrument panel; 2. Press and hold the button on the right side of the instrument panel to bring up the instantaneous fuel consumption; 3. Turn off the ignition switch while holding the button on the right side of the instrument panel; 4. Turn on the ignition switch while continuing to hold the button on the right side of the instrument panel for more than three seconds; 5. Release the right button and immediately press both buttons on the instrument panel simultaneously, releasing them within two seconds. The wrench icon on the instrument panel will disappear. The 2012 Chery Flagcloud 2 features a passive safety design that integrates anti-theft and one-touch window lift functions, ensuring enhanced safety and peace of mind.
9
1
Share

How to start the Nissan Sylphy when the key fob battery is dead?

The method to start the Nissan Sylphy when the key fob battery is dead is: 1. Press the side of the key with the logo firmly against the push-button start switch. 2. Hold it for a few seconds, then press directly to start. Below is some relevant information about the Sylphy: 1. The Sylphy is a compact sedan under Dongfeng Nissan. 2. Its body dimensions are: length 4631 mm, width 1760 mm, height 1503 mm, with a wheelbase of 2700 mm. 3. The Sylphy is equipped with a 1.6L 122 horsepower L4 engine, with a maximum power of 90 kW and a maximum torque of 155 Nm. It uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
14
4
Share

What are the differences between a rally motorcycle and a street motorcycle?

The biggest difference between street motorcycles and rally motorcycles lies in the height of the seat. The footpegs and seat position of rally motorcycles are much higher than those of street motorcycles, but the handlebars are lower. Here are the specific details: 1. Comfort: In terms of comfort, rally motorcycles are designed specifically for travel, making them more comfortable. In terms of speed, rally motorcycles focus on competition, with their seating posture and power designed for racing. For example, reducing wind resistance (the seat is higher), providing extremely high acceleration (high power and fuel consumption), and better off-road capability (higher frame). 2. Economy: In terms of economy, rally motorcycles consume less fuel, making them more economical. Compared to regular motorcycles, rally motorcycles have higher seats, which also gives them better off-road performance. Additionally, rally motorcycles are designed for long-distance riding without issues, so their quality and craftsmanship are superior to regular motorcycles. Rally motorcycles are also equipped with long-travel suspension systems, ensuring effective performance during prolonged use.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.