What are the body dimensions of the 2021 Tiguan L?

2 Answers
DelColin
07/29/25 2:32am
2021 Tiguan L body dimensions are 4712(mm) in length, 1839(mm) in width, and 1673(mm) in height, with a wheelbase of 2791(mm). In terms of power, the 2021 Tiguan L is equipped with a turbocharged engine, delivering a maximum horsepower of 186 hp, with a maximum power speed range of 4100 to 6000 rpm and a maximum torque speed range of 1500 to 4000 rpm. The 2020 Tiguan L adopts a front-engine, front-wheel-drive layout, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension. The Volkswagen Tiguan L is a mid-size SUV produced by SAIC Volkswagen. This model is equipped with three engines: a 1.4-liter turbocharged engine, a low-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine is coded as EA211-DJS, the low-power version 2.0-liter turbocharged engine is coded as EA888-DKV, and the high-power version 2.0-liter turbocharged engine is coded as EA888-DKX. All three engines are paired with a 7-speed dual-clutch transmission. The Tiguan L, as a mid-size SUV, not only offers spacious and comfortable seating space but also features a relatively large trunk capacity. The rear seats can be folded down in a split ratio to expand the cargo space. The trunk has a regular depth of 910mm, a maximum depth of 1940mm, a width of 1000mm, and a height of 820mm, with a volume ranging from 495L to 1780L.
Was this review help?
18
1
Share
DelKing
08/12/25 6:29am
I remember last year when I accompanied my friend to pick up the 2021 Tiguan L, I specifically measured its dimensions. This car fits perfectly in my parking space. With a body length of 4733 mm, it's equivalent to two small cars parked side by side. The width of 1839 mm allows three adults to sit comfortably without feeling cramped, and the height of 1673 mm means that even with my 178 cm stature, there's still more than a fist's space above my head when I'm in the driver's seat. The most crucial aspect is the 2791 mm wheelbase, which allows for easily crossing legs in the back seat. When traveling with my parents, they mentioned that the rear seats are much more spacious than our old sedan. The trunk can effortlessly accommodate a stroller plus four suitcases without any issue, though parking in the city requires finding a standard-sized space to maneuver comfortably.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

Where to Renew Driver's License in Puyang City in 2021?

When your driver's license is about to expire, you can apply for a renewal at the vehicle management office within 90 days before the expiration date. Precautions for expired driver's license: According to the Road Traffic Safety Law, if a driver's license is not renewed for more than one year after its expiration, it will be automatically revoked. If it exceeds two years, the driver must pass the subject one exam to restore the license's normal use. For those whose license has been revoked for more than two years, they need to reapply for a new one. Invalid driver's license: It is important to note that driving with an expired license is not permitted. Driving with an expired license is considered unlicensed driving or treated as such.
1
0
Share

What is the Difference Between an Electric Tailgate with Power Latch and Without?

The differences between an upper power latch and a lower power latch on an electric tailgate are several. Details about the upper and lower power latches on the tailgate: Differences between upper and lower power latches: Different installation positions: the upper latch replaces the tailgate, while the lower latch replaces the lock pin on the trunk; Different product complexities: the structure of the upper latch is more complex, resulting in higher manufacturing costs. The lower latch only includes a motor and a lock pin; Different functionalities: the upper latch is an active locking component, while the lower latch is merely a passive fixed component, so the upper latch requires wiring. The upper latch also offers higher safety, preventing the tailgate from automatically opening during driving. Introduction to electric tailgates: An electric tailgate is a brand-new intelligent system for car modification, allowing drivers to control the opening and closing of the car's trunk via the original car key, tailgate switch, or driver's seat button. An electric tailgate is a brand-new intelligent system for car modification, allowing drivers to control the opening and closing of the car's trunk via the original car key, tailgate switch, or driver's seat button.
4
5
Share

What is the phenomenon of road heat waves?

Heat waves refer to excessively hot weather conditions where overheated wind currents carry hot air, which is a natural phenomenon. When this phenomenon occurs in urban areas, it is called the urban heat island effect. Due to dense populations and numerous buildings in cities, winds passing through carry low-pressure air currents. Additionally, radiation surfaces intensify the heat properties of the wind, resulting in hot gusts. Prolonged excessive heat may also be accompanied by high humidity. More relevant information is as follows: Connection: This term is usually region-specific, so a temperature considered normal in hotter climate zones might be classified as a heat wave in typically colder regions. Hazards: Some areas are more vulnerable to heat waves, such as Mediterranean climates with dry summers and wet winters. Heat waves can cause fatalities due to extreme temperatures, particularly among elderly populations.
19
2
Share

What are the new vehicle inspection regulations for 2021?

On the basis of exempting non-operational mini-buses with 6 or fewer seats from inspection within 6 years, the scope of exemption has been further expanded to include non-operational mini-buses with 7-9 seats within 6 years. When a biennial regular inspection is required, the vehicle owner can directly apply to the traffic management department of the public security authority for the inspection label by providing the compulsory traffic accident liability insurance certificate and the tax payment or tax exemption certificate for vehicle and vessel tax, without the need to undergo safety technical inspection at an inspection institution. More relevant information is as follows: For non-operational mini-buses over 6 years but under 10 years old: The inspection cycle has been relaxed from once a year to once every two years, meaning private cars only need to undergo on-site inspection twice within 10 years, specifically in the 6th and 8th years. For private cars over 10 years old: The original inspection cycle still applies, i.e., once a year for cars aged 10-15 years, and once every six months for cars over 15 years old. After the implementation of this measure, more than 170 million private car owners nationwide will benefit from the convenience brought by the reform.
17
2
Share

What is the speed when fully releasing the clutch in first gear while practicing driving?

The speed when fully releasing the clutch in first gear while practicing driving is within the range of 0-60 km/h. The first gear of a sedan can only operate within the range of 0-60 km/h, meaning that even if the accelerator is fully pressed, the speed will not exceed 60 km/h when driving in first gear. In contrast, the high-speed fifth gear can operate within the range of 65-170 km/h. When shifting up, the gear lever must be moved accurately and smoothly to avoid delaying the shifting opportunity. Manual transmission vehicle driving requirements stipulate: Clutch: It can be installed coaxially or on separate shafts, but the axial direction must be fixed. Neither the driving part nor the driven part is allowed to have axial movement. When installed on separate shafts, the coaxiality between the driving part and the driven part shaft should not exceed 0.1 mm. Engagement: Smooth and gentle to ensure a stable start of the vehicle; quick and thorough separation to facilitate gear shifting and engine starting; with appropriate reserve capacity to ensure the transmission of the engine's maximum torque while preventing overload of the transmission system. During driving: Frequent operation of the clutch can cause relative sliding between the driving and driven parts of the clutch, generating frictional heat. If the heat is not dissipated in time, it can severely affect the reliability and service life of the clutch.
10
4
Share

Is It Necessary to Replace Steel Car Wheels?

It is necessary to replace steel car wheels. While steel wheels have their advantages, for ordinary household vehicles (small and micro passenger cars), the disadvantages outweigh the benefits. Most cars today come standard with aluminum alloy wheels when leaving the factory. Steel wheels have good toughness but poor hardness, whereas aluminum alloy wheels have high hardness but poor toughness. Aluminum alloy wheels are lightweight, corrosion-resistant, aesthetically pleasing, and highly durable, making them less prone to deformation. However, they are also more expensive. Once damaged, aluminum alloy wheels cannot be restored to their original appearance or repaired and must be replaced entirely. Due to their higher cost compared to steel wheels, many brands still equip their low-end models with steel wheels. Due to the difference in materials, the density of aluminum alloy is lower than that of steel wheels, making aluminum alloy wheels generally lighter in weight. Reducing the vehicle's weight not only helps lower fuel consumption but also shortens braking distances. Additionally, the reduced weight allows for quicker acceleration compared to steel wheels. The lighter weight also contributes to a more comfortable ride.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.