What are the body dimensions of the 2021 Highlander?

Does Disassembling the Engine Have a Significant Impact?

Disassembling the engine does not have a significant impact. Following the normal procedures for disassembly and installation will not harm the machine's performance. Generally, engine disassembly for repairs is only necessary in cases such as water entering the engine, mixing of engine oil and water, or damage to the engine casing leading to oil or water leaks. Inspection criteria for engine overhaul: When there is severe oil consumption and blue smoke emission: If there is oil leakage, it is likely caused by aging valve seals or aligned gaps in the piston rings. For these two scenarios, priority should be given to inspecting these two automotive component groups before deciding whether an engine overhaul is necessary. When the engine produces abnormal noises: If severe knocking sounds are detected, or if the engine's main and connecting rod bearings are severely worn and the crankshaft shows significant wear, an overhaul should be considered. When cylinder wear reaches overhaul standards: Regardless of other symptoms in the car, the ultimate criterion for deciding on an overhaul is the extent of cylinder wear. If the cylinder's out-of-roundness reaches 0.125mm per 100mm of bore diameter, or if the cylinder's taper wear reaches 0.4mm per 100mm of bore diameter, meeting either of these conditions warrants consideration for an overhaul.

1

5

Share

Will There Be a Popping Sound When Starting with Rusty Brake Discs?

Starting with rusty brake discs can produce a popping sound. Brake systems include disc brakes, drum brakes, and air brakes. Disc brakes offer better heat dissipation compared to drum brakes, making them less prone to thermal fade during high-speed braking, thus providing superior high-speed braking performance. However, their braking effectiveness at low speeds with cold brakes is inferior to drum brakes. Light rust on the brake disc surface: If there is only light surface rust, it can typically be removed by applying the brakes multiple times while driving. No special treatment is required, as minor rust on the brake discs will naturally wear off during normal braking. Severe rust on the brake disc surface: If the rust is more severe, it may cause vibrations or shaking during braking, such as brake pad vibration, steering wheel vibration or shaking, or body tremors. In such cases, it is advisable to take the vehicle to a repair shop, remove the brake discs, and sand the rust off thoroughly. The brake pads should also be inspected for any abnormalities. After proper reinstallation, a road test should be conducted. The road test involves driving at a speed of 70 km/h on a flat road and performing multiple brake applications to ensure no abnormalities are present. Precautions for brake disc usage: To maintain brake discs, it is recommended to perform maintenance every two months to prevent severe rust development. If vibrations persist after sanding the brake discs, it indicates an uneven surface, which may require further polishing or, depending on the situation, replacement.

18

5

Share

Will you be penalized for occupying the overtaking lane on the highway for a long time?

Occupying the overtaking lane for a long time will result in penalty points. According to the "Road Traffic Safety Law," on highways, especially in the overtaking lane, driving below the minimum speed limit or occupying the overtaking lane for an extended period under normal driving conditions are considered illegal acts, punishable by a 3-point deduction and a fine. The overtaking lane is located in the leftmost lane of the highway. It is only set up when the road meets the standards of a bidirectional six-lane highway. The overtaking lane is designed for vehicles that need to overtake or those traveling at the required speed. However, some drivers occupy the overtaking lane for long periods, forcing vehicles that need to overtake to do so from the relatively slower main lanes. This increases the speed difference between the overtaking vehicle and the vehicles in the main lane, raising the risk of traffic accidents. Precautions for driving on highways: When merging, do not obstruct vehicles traveling in the main lane; always pay attention to roadside and road signs and markings, and drive appropriately to the right, avoiding straddling lanes; maintain a safe longitudinal distance between vehicles, increasing the distance in special weather conditions; when overtaking, estimate the distance and speeds of both vehicles, and under normal conditions, signal left, sound the horn, and overtake from the overtaking lane—overtaking from the right is prohibited.

9

0

Share

What tires are compatible with the Changan CS75?

The early models of the Changan CS75 were equipped with Dunlop tires. From July and August onwards, Yokohama tires (also known as Yokohama tires) were used. However, the parameters of the two tires are the same, with a price difference of a few dozen yuan. The Dunlop tires are just slightly more well-known than the Yokohama tires. Both are Japanese brands. Additional information: Chongqing Changan Automobile Co., Ltd., referred to as Changan Automobile or Chongqing Changan, is a core vehicle manufacturer under China Changan Automobile Group Co., Ltd. It was listed on the Shenzhen Stock Exchange in 1996, with A-share code 000625 and B-share code 200625. Its history can be traced back to the period of the Westernization Movement, originating from the Shanghai Arsenal established in 1862, which pioneered China's modern industry. It was registered and became a highly competitive listed company in 1996, owning 2 listed companies and 4 stocks. In March 2014, Chongqing Changan Automobile Co., Ltd. acquired Hefei Changan Automobile Co., Ltd. Changan Automobile is headquartered at the confluence of the Yangtze and Jialing Rivers in Chongqing, and is a company engaged in the development, manufacturing, and sales of a full range of passenger and commercial vehicles. Its main products include a full range of passenger cars, small commercial vehicles, light trucks, minivans, and medium to large buses, as well as a full range of engines, with an annual production capacity of over 1 million vehicles and over 1.1 million engines. On June 3, 2015, the Ministry of Industry and Information Technology announced the 2015 Smart Manufacturing Special Projects, with related projects from 94 companies being selected, including Chongqing Changan Automobile Co., Ltd. On December 3, 2015, Changan Automobile formed a strategic partnership with the AutoNavi Group. On December 26, 2015, Chongqing Changan Automobile Co., Ltd. recalled the Benben i/Benben LOVE models, totaling 30,886 vehicles.

18

5

Share

Can a Deteriorated Three-Way Catalytic Converter Still Be Used?

A deteriorated three-way catalytic converter should not continue to be used. When a car's three-way catalytic converter deteriorates, it becomes ineffective, leading to poor engine exhaust flow and excessive tailpipe emissions. The best solution is to replace it with a new one. Cleaning the Three-Way Catalytic Converter: The cleaning method for a three-way catalytic converter is known as the "drip cleaning" process. This involves connecting a plastic hose to the engine's vacuum solenoid valve and using the air pressure in the hollow tube to draw cleaning fluid from an infusion bottle into the engine. As the cleaning fluid exits through the exhaust pipe, it cleans the three-way catalytic converter. Lifespan of the Three-Way Catalytic Converter: The typical lifespan of a three-way catalytic converter is between 80,000 to 100,000 kilometers. The exact lifespan depends on the vehicle's usage conditions, as well as the quality of fuel used and the driving environment.

8

5

Share

What documents are required for car transfer procedures?

Documents required for car transfer: ID card, vehicle license, original purchase invoice, and sales contract. Below is an introduction to car transfer and its principles: Introduction to car transfer: Vehicle transfer refers to changing the name of the vehicle's owner. When purchasing a used car, apart from checking the car's condition, the most important step is completing the transfer procedures. Principles of car transfer: Every car has a fixed registration, which primarily records the car's owner, address, and some related car parameters. Transferring a car proves that the car belongs to the current owner and has no accidents or violations. If the car has issues, such as being involved in an accident, failing annual inspection, being stolen, or being smuggled, it cannot be transferred through normal procedures.

6

0

Share

What are the body dimensions of the 2021 Highlander?

Does Disassembling the Engine Have a Significant Impact?

Will There Be a Popping Sound When Starting with Rusty Brake Discs?

Will you be penalized for occupying the overtaking lane on the highway for a long time?

What tires are compatible with the Changan CS75?

Can a Deteriorated Three-Way Catalytic Converter Still Be Used?

What documents are required for car transfer procedures?

What tire models can be replaced for the Baojun 310?

How Long Can You Drive with the Coolant Light On?

What brand of engine oil is used for Hyundai Elantra?

How many liters of engine oil does the GSX250R require for an oil change?