What are the body dimensions of the 2021 Audi A4?

2 Answers
Mateo
09/04/25 7:21am
2021 Audi A4 body dimensions are: length 4762mm, width 1847mm, height 1436mm, with a wheelbase of 2825mm, fuel tank capacity of 54 liters, and curb weight of 1665kg. The 2021 Audi A4 is equipped with a 2.0T turbocharged engine, delivering maximum torque of 320Nm and maximum power of 150kW, paired with a 7-speed dual-clutch transmission. The 2021 Audi A4 features front-wheel drive, with both front and rear suspensions using five-link independent suspension, and tire specifications of 245/40R18.
Was this review help?
18
2
Share
DaniellaRose
09/16/25 8:12am
I previously studied the specific dimensions of the 2021 Audi A4 in detail. It is a standard midsize sedan with a body length of approximately 4760 mm, a width around 1847 mm, a height of about 1430 mm, and a wheelbase of 2820 mm. Converted to meters, the length is roughly 4.76 meters, the width 1.85 meters, and the height 1.43 meters, making it manageable for daily city driving without much difficulty in parking. The wheelbase, which is the distance between the wheels, affects rear-seat space—it comfortably accommodates two adults. The trunk capacity is around 460 liters, suitable for weekend shopping or short trips. The dimensions align with Audi's family design, emphasizing a streamlined look and a low drag coefficient for better fuel efficiency, while also providing good stability at high speeds. In summary, such dimensional data is crucial when purchasing a new car or for maintenance purposes. It's advisable to check the official manual for precise values to avoid misjudging space requirements and compromising practicality.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Where is the Cruise Control on the Honda Avancier?

The cruise control on the Honda Avancier is located on the multifunction buttons on the left side of the steering wheel. The principle of cruise control is: the cruise control module reads the pulse signal from the speed sensor and compares it with the set speed, then issues commands to the servo mechanism to mechanically adjust the throttle opening to increase or decrease, ensuring the vehicle maintains the set speed. Taking the 2020 Honda Avancier as an example, it belongs to the midsize SUV category, with body dimensions of: length 4585mm, width 1942mm, height 1670mm, a wheelbase of 2820mm, a trunk capacity of 510l, and a curb weight of 1708kg.
5
5
Share

What is the usage method of car battery charging clamps?

The usage method of car battery charging clamps is: connect the positive clamp to the positive terminal of the battery, and the negative clamp to the negative terminal of the battery. The functions of the battery are: 1. To supply power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. To supply power to the car's electrical equipment when the engine is stopped or at low idle speed; 3. To assist in supplying power to electrical equipment when the generator's output is insufficient; 4. To mitigate impact voltage in the electrical system and protect the electronic equipment in the car; 5. To store excess electricity generated by the alternator. The maintenance methods for the battery are: 1. Start the car regularly to charge the battery; 2. Add distilled water or special replenishing fluid when the electrolyte is insufficient; 3. Frequently check whether the small holes on the battery cover are ventilated during daily driving; 4. Check whether the positive and negative terminals of the battery are oxidized; 5. Check whether any part of the circuit is aged or short-circuited; 6. Turn off electrical equipment when leaving the car.
7
1
Share

Is car window film applied on the outside or inside of the glass?

Car window film is applied on the inside of the glass. The functions of car window film are: 1. Providing heat insulation in summer to save air conditioning energy; 2. Reducing heat loss in winter to maintain interior temperature; 3. Blocking UV rays to prolong the lifespan and quality of interior decorations by preventing direct sunlight exposure; 4. Reducing glare to ensure driving safety and comfort. Post-installation precautions include: 1. Avoiding window operation for 3 days; 2. Not cleaning the film or using defogger heating wires for one week; 3. Not using fingernails or sharp objects to peel the edges to prevent dirt ingress; 4. Avoiding suction cup items on the film for 1-2 weeks; 5. Seeking professional assistance immediately for bubbles, displacement, or visual obstructions to ensure driving safety.
11
0
Share

What are the consequences of adding tap water to the engine radiator?

Adding tap water to the engine radiator can cause the car to malfunction due to excessive temperature. The following are the specific reasons and methods for dealing with radiator boiling: Reasons: The car radiator is the main component of the car's cooling system. The car radiator should not come into contact with any acid, alkali, or other corrosive substances to prevent aging. Soft water should be used in the radiator. Hard water needs to be softened before use to avoid internal blockage and scale formation in the car radiator. It is recommended to choose long-lasting antifreeze that meets national standards and is produced by reputable manufacturers. Tap water tends to produce more rust, which is detrimental to the smoothness of the engine's water passages. Handling radiator boiling: If the temperature gauge rises during driving, choose a safe place to stop immediately, turn off the engine, and open the hood to help the engine cool down. After about half an hour, the engine temperature will return to normal. Then, carefully check the radiator scale and whether the fan is damaged. If the radiator is low on water, you can add purified water or antifreeze after it has cooled for a while. Do not add cold water directly. Always use a wet towel to cushion the opening of the radiator cap to prevent steam burns.
3
0
Share

What Does It Mean for a Car's Chassis to Be Stable?

Car chassis stability refers to: 1. Sturdy vehicle structure; 2. Good driving stability; 3. Excellent handling. The function of a car chassis is to support and install the car engine and its various components and assemblies, form the vehicle body shape, receive the engine's power, enable the car to move, and maintain normal driving. The maintenance methods for a car chassis include: 1. Regularly check the condition of the car tires; 2. Periodically clean and wipe the car chassis; 3. Promptly inspect the working conditions of various components during car operation; 4. Regularly maintain and inspect the car's shock absorbers. The structure of a car chassis consists of the transmission system, running system, steering system, and braking system.
6
0
Share

How many speakers does the BMW E90 have?

BMW E90 has six speakers. Methods to maintain speaker appearance cleanliness: Ensure all wiring connections are secure. Regularly inspect and tighten the fixing screws of the speakers and brackets to ensure reliable grounding. Speaker mounting methods: The mounting method of the speaker significantly affects its sound output. To ensure normal sound production, speakers should not be rigidly mounted. Instead, they should be fixed on a vibration-damping bracket, meaning a leaf spring or rubber pad should be installed between the speaker and the mounting bracket. Checking generator output voltage: Excessive voltage can burn out the speaker contacts, while insufficient voltage (below the speaker's rated voltage) will cause abnormal sounds from the speaker.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.