···
Log in / Register

What are the body dimensions of the 2019 Camry?

3 Answers
MacLayla
09/03/25 6:56am
2019 Camry's body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The Camry is a model under GAC Toyota. The 2019 Camry series comes standard with TPMS tire pressure monitoring system, and all models except the 2.0 Leading Edition and Elite Edition feature numerical display. The 2019 Camry offers dual styling designs: Luxury and Sport, both inspired by Toyota's new "Keen Look" design language. The Luxury version features a large trapezoidal horizontal grille, a streamlined body posture, lower waistline, and an extended roofline that enhances rear headroom.
Was this review help?
18
1
Share
DiAlice
09/15/25 8:17am
I drove the 2019 Camry for a while, and its body dimensions were quite impressive. The length is approximately 4885 mm, the width is around 1840 mm, the height is controlled at 1455 mm, and the wheelbase reaches 2825 mm. These dimensions provide excellent stability at high speeds without easily swaying; in city driving and parking, it feels slightly bulky, but Toyota's steering system is quite responsive, and with the rearview camera, it's quite easy to handle. The interior space benefits from the generous wheelbase, offering ample legroom in the rear seats, making family trips with luggage comfortable, and the trunk can hold several large suitcases. The overall design considers daily practicality, such as the low body center of gravity reducing wind resistance, which helps with fuel efficiency, making it feel particularly fuel-efficient on long drives.
Was this review help?
19
1
Share
Expand All
SanAustin
10/30/25 2:08am
As a car frequently used for family trips, the 2019 Camry has considerate dimensions. The body is 4885 mm long, 1840 mm wide, and 1455 mm high, with a wheelbase of 2825 mm. When my family and I travel in it, the rear seating space is very spacious, ensuring children and elderly passengers don't get tired even after long rides. The trunk capacity is ample, easily accommodating strollers and tents without any issues. However, extra caution is needed when parking in residential areas due to its width, as it's easy to scrape neighboring cars. Fortunately, Toyota designed it to be compact overall, with a relatively small turning radius. Although the larger size makes parking slightly more challenging, it offers good stability in terms of safety, with well-designed crumple zones that reduce skidding on rainy or snowy roads.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

How many liters of engine oil does the Great Wall Poer need?

Great Wall Poer requires 5 to 5.5 liters of engine oil. Vehicle Introduction: The Great Wall Poer series is the flagship model of Great Wall Motors' pickup truck lineup. It made its debut at the Shanghai Auto Show on April 16, 2019, as a brand-new product series based on an all-new platform and manufactured at the new Chongqing factory, targeting the international mainstream market. It comes equipped with various practical features such as an intelligent connectivity system, one-button start, keyless entry, electric sunroof, seat heating, vehicle stability system, brake assist, and cruise control. Model Configuration: In terms of power, the entire series is equipped with a 2.0T inline 4-cylinder turbocharged engine, paired with an 8-speed automatic manual transmission. It delivers a maximum power of 140KW (190PS) and a maximum torque of 360N.m. The maximum power is achieved at 4000-5500 rpm, while the maximum torque is available at 1800-3600 rpm. All models feature direct fuel injection.
4
1
Share

How Does Water Get Inside the Car on Rainy Days?

Possible reasons for water inside the car on rainy days include: leaks or poor sealing of the sunroof; clogged or detached sunroof drainage holes preventing water from draining outside the vehicle; driving through deep water that enters the car; or poor sealing of the vehicle body. Below is an extended explanation: 1. Insurance Claims: If the vehicle is submerged in water while parked, the damage can be claimed under comprehensive insurance. If the engine is damaged by water while driving, it requires specific water damage insurance. 2. Inspection: If water is found under the carpets, on the driver’s side, under the passenger or rear seats, it’s crucial to promptly remove water from under the floor mats or carpets. Failure to do so can lead to mold, damage to wiring harnesses, or control units. Depending on the severity of water ingress, remove all seats from the cabin. Take out floor mats, carpets, and other components. Dry out any moisture. Thoroughly air-dry carpets and floor mats. Replace any damaged control units. Electrical wiring that has been exposed to water must be cleaned to remove moisture and dampness. While addressing interior water, always check how water entered the vehicle.
11
4
Share

What Causes a Car to Fail to Shift Gears After Rain?

After rain, a car may fail to shift gears because water enters the clutch, causing it to stick and preventing complete disengagement. In such cases, the clutch plate and pressure plate need to be replaced. Below is an extended explanation: 1. When wading through water: Avoid shifting gears while driving through water. The safest approach is to use a low gear and proceed slowly. Before entering water, assess the depth, current speed, and the condition of the waterbed, as well as the width of the entry and exit points and the road conditions to determine if it is safe to proceed. 2. Water depth standard: If the water level reaches two-thirds of the front bumper or the tires, driving through water poses certain risks. The standard for safe water depth is that it should not reach the car's chassis. If the water is not deep, proceed slowly in a low gear. While driving through water, ensure not to release the throttle or shift gears, as this can easily cause water to enter the exhaust pipe, affecting the engine's performance.
5
0
Share

What are the differences between BYD and Bentley logos?

The differences between BYD and Bentley logos are: 1. Different letters: The internal letters of the BYD logo are BYD; the internal letter of the Bentley logo is B. 2. Different logo shapes: The BYD logo is an ellipse; the Bentley logo is a pair of wings. Bentley's car models include Mulsanne, Flying Spur, Continental, and Bentayga. Among them, the Bentley Continental is a high-performance GT sports car, equipped with two engines: one is a 4.0-liter V8 twin-turbocharged engine, and the other is a 6.0-liter W12 twin-turbocharged engine. The 4.0-liter twin-turbocharged V8 engine delivers 549 horsepower and a maximum torque of 770 N·m. This engine features direct injection technology and uses an aluminum alloy cylinder head and block. The 6.0-liter W12 twin-turbocharged engine delivers 635 horsepower and a maximum torque of 900 N·m. This engine features hybrid injection technology and uses an aluminum alloy cylinder head and block.
12
1
Share

What are the dimensions of the Great Wall Pao (Cannon) vehicle?

The dimensions of the Great Wall Pao (Cannon) vehicle are 5489mm*2084mm*1920mm, with a wheelbase of 3230mm. Vehicle Introduction: The Great Wall Pao series is the flagship model under Great Wall Motors' pickup truck lineup, making its debut at the Shanghai Auto Show on April 16, 2019. As a brand-new product series, it is built on an all-new platform and manufactured at the new Chongqing factory, targeting international mainstream markets. It comes equipped with various practical features such as an intelligent connectivity system, one-button start, keyless entry, electric sunroof, seat heating, vehicle stability system, brake assist, and cruise control. Model Configuration: In terms of powertrain, the entire series is powered by a 2.0T inline 4-cylinder turbocharged engine, paired with an 8-speed automatic manual transmission. It delivers a maximum power of 140KW (190PS) and a peak torque of 360N.m. The engine reaches its maximum power at 4000-5500 rpm and achieves peak torque at 1800-3600 rpm. All models feature direct fuel injection.
5
2
Share

What are the Honda hatchback models?

Honda hatchback models include the Dongfeng Honda Jade and the GAC Honda Fit. The Jade measures 4667mm in length, 1775mm in width, and 1530mm in height, with a wheelbase of 2760mm. It features a MacPherson independent front suspension and a double-wishbone independent rear suspension. The car is equipped with two engine options: a 1.5T and a 1.8L, paired with either a 5-speed manual transmission or a CVT. The 1.8L engine delivers a maximum output of 104 kW, a peak torque of 174 Nm, a top speed of 187 km/h, and a 0-100 km/h acceleration time of 13.6 seconds. The Fit measures 4096mm in length, 1695mm in width, and 1525mm in height, with a wheelbase of 2530mm. It comes with a 1.5L engine across all variants, paired with either a 5-speed manual transmission or a CVT. The 1.5L engine produces a maximum output of 96 kW, a peak torque of 155 Nm, and a top speed of 180 km/h.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.