What are the body colors available for the Lexus UX?

What does the engine auto start-stop function mean?

Engine auto start-stop function refers to a system that automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when needed to continue moving. The usage method is as follows: 1. After starting the car, the auto start-stop system is in normal working condition; 2. When encountering a traffic light or other reasons for stopping, stepping on the brake will automatically shut off the engine; 3. When starting again, releasing the brake and stepping on the accelerator or turning the steering wheel will restart the engine. The conditions for the auto start-stop to cease operation are: 1. The engine is idling and not in gear; 2. The wheel speed sensor of the anti-lock system shows zero; 3. The electronic battery sensor indicates there is sufficient energy for the next start.

116

Share

How high is the Mazda CX4 chassis?

Mazda CX4 chassis height is 210mm. The higher the chassis, the better the vehicle's passability, but the stability is relatively poor. The Mazda CX4 is a compact 5-door, 5-seat SUV with body dimensions of: length 4637mm, width 1855mm, height 1524mm, and a wheelbase of 2700mm. The Mazda CX4 is equipped with a 2.0L naturally aspirated engine and a 6-speed automatic manual transmission, with a maximum power of 116 kilowatts and a maximum torque of 202 Newton-meters. Its drive mode is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using an E-type multi-link independent suspension.

106

Share

Are Car Acceleration Fuel Savers Really Effective?

Car acceleration fuel savers are not effective. A car fuel saver refers to a device that claims to reduce fuel consumption through certain methods. However, due to the current lack of standardization in the fuel saver market and limitations in fuel-saving technology, the advertised fuel savings by these devices are often exaggerated, with actual savings generally not exceeding 10%. Below is some information about car fuel savers: 1. Principle of Water-Powered Car Fuel Saver: It works by electrolyzing water into hydrogen and oxygen, which are then sent into the engine's cylinders to burn alongside other fuels. The introduction of oxygen allows the engine's fuel to burn more completely, improving fuel efficiency. Hydrogen is an environmentally friendly, high-energy fuel with a combustion heat three times that of gasoline. The injection of hydrogen essentially increases the fuel supply while reducing the gasoline supply through the control of a microcomputer-integrated controller, substituting the reduced gasoline with added hydrogen. 2. Principle of Variable-Frequency Car Fuel Saver: It uses variable-frequency voltage stabilization technology to stabilize the circuit's pulse voltage and store electrical charge, thereby extending the lifespan of all electrical components in the car and improving the precision of the onboard computer's control over the circuit and fuel system. This ensures the car's fuel and power performance operate at normal levels, achieving the goal of fuel savings. 3. Principle of High-Voltage Car Fuel Saver: It generates ozone (O3) through high-voltage discharge. When O3 enters the cylinder, it decomposes into three oxygen atoms under high temperature, significantly increasing the oxygen content in the cylinder. This allows the fuel to better adsorb and combine with oxygen atoms in a mist state, forming fuel-air mixture particles that are easier to burn, thereby shortening the ignition delay period. This improves fuel combustion performance and the air-fuel ratio, making the engine's fuel combustion more complete, ultimately resulting in reduced fuel consumption, lower exhaust emissions, and enhanced power output.

105

Share

What to Do When Your Highway ETC is Overdrawn?

Highway ETC overdraft can be handled by repaying the amount as soon as possible and settling the outstanding balance. ETC, or Electronic Toll Collection, is installed on the right side behind the rearview mirror inside the vehicle, ensuring it does not obstruct the driver's view. Its purpose is to enable vehicles to pay highway or bridge tolls without stopping at toll booths. Precautions for using ETC include: 1. The ETC transaction sensing area is 8 meters, so maintain a distance of more than 10 meters from the vehicle ahead to prevent issues with the front vehicle's ETC device; 2. The ETC lane recognizes vehicle speeds up to 20 km/h, and speeds exceeding this limit may result in failed transactions due to inability to read the vehicle's device information; 3. When using a debit card linked to ETC, insufficient balance may also lead to failed transactions.

112

Share

What are the general components of a car?

A car is generally composed of the engine, chassis, body, and electrical equipment, with their respective functions as follows: 1. The engine serves as the power unit of the car; 2. The chassis forms the foundation for car assembly and movement, receiving power from the engine; 3. The body provides the workspace for the driver and serves as the compartment for passengers and cargo; 4. Electrical equipment is used for starting the car engine, ignition, lighting, light signals, and monitoring devices such as gauges. Car maintenance items include: 1. Changing the engine oil and oil filter; 2. Replacing the air filter; 3. Inspecting the spark plugs; 4. Replacing the fuel filter; 5. Adding brake fluid; 6. Changing the transmission oil; 7. Cleaning the throttle body; 8. Cleaning the fuel injectors; 9. Inspecting tires and the braking system; 10. Replacing the cabin air filter; 11. Replacing the engine belt.

106

Share

What Causes a New Car's Engine to Overheat?

The reasons for a new car's engine overheating are: 1. The fan motor is not working or the fan clutch is faulty, preventing proper cooling; 2. The catalytic converter is blocked or the pipe is broken, causing exhaust obstruction; 3. The cooling system's pipe is broken, leading to coolant loss and abnormal heat dissipation; 4. The water pump, after long-term use, is highly worn, causing parts to wear out and fall off; 5. The radiator cap's pressure is unstable, causing the spring to loosen and the cap not to close tightly. The solutions for a new car's engine overheating are: 1. Turn off the air conditioning and drive the car to a safe area to park; 2. Let the engine idle for a few minutes until the water temperature gauge needle returns to the position between H and C; 3. Check whether the water pump's belt and pulley are damaged or slipping; 4. Check if there is any leakage in the coolant level.

111

Share

What are the body colors available for the Lexus UX?

What does the engine auto start-stop function mean?

How high is the Mazda CX4 chassis?

Are Car Acceleration Fuel Savers Really Effective?

What to Do When Your Highway ETC is Overdrawn?

What are the general components of a car?

What Causes a New Car's Engine to Overheat?

What is the function of the Corolla front axle connecting rod?

What Are the Solutions When the Car Door Lock Won't Engage?

At which position on the dipstick should the engine oil be?

Where is the camshaft position sensor located on the Sonata?