What are the body colors available for the Fit?

How to Shift to Neutral (N) for Towing a Mercedes-Benz?

Depress the brake pedal of the automatic transmission vehicle. Turn the car key to the ST (Start) position. The dashboard lights up, indicating the vehicle is started. Press the gear lock switch on the automatic transmission shift lever. Pull the shift lever to the N (Neutral) position to engage neutral gear.

16

4

Share

How Many Types of Materials Are There for Car Body Color Change Films?

Car color change films are generally divided into three types: PVC, TPU, and Vinyl. 1. PVC Material: PVC, also known as polyvinyl chloride, is primarily used for car color change films due to its hardness, which provides protection for the car body. However, this level of protection gradually weakens over time due to exposure to wind and sunlight. Therefore, even if a car uses a color change film, maintenance is still necessary. 2. TPU Material: According to industry experts, the biggest advantage of TPU material is its ability to maintain good protective performance for the car body even in extremely cold or hot conditions, with minimal damage to the film itself. Most color change films made from this material are produced by foreign brands. 3. Vinyl Material: Vinyl, also known as ethylene, is durable, flexible, and easy to use, offering a wider range of colors and surface finishes. Vinyl films can produce color change film products that look as good as, or even better than, high-quality paint. Applying vinyl film to a car exterior provides three main benefits. First, it offers superior protection for the car's original paint compared to other materials. Second, it enables colors and finishes that car manufacturers cannot provide, including metallic, matte, carbon fiber, and even chrome finishes, which can be combined with any color. Third, vinyl film is easy to care for, requiring only soap and water for cleaning.

12

0

Share

What does TSS 2.0 mean?

TSS 2.0 is the abbreviation for the second-generation Toyota Safety Sense collision avoidance assistance package. Here are the relevant details: 1. It includes LDA (Lane Departure Alert), AHB (Automatic High Beam), DRCC (Dynamic Radar Cruise Control, upgraded to full-speed range), PCS (Pre-Collision System), and LTA (Lane Tracing Assist, with vehicle following function). TSS 2.0 adds LTA and upgrades DRCC to full-speed range radar cruise compared to the first generation. 2. The Pre-Collision System utilizes a front millimeter-wave radar and monocular camera to detect pedestrians, bicycles, and vehicles during the day, and pedestrians and vehicles at night. The system activates when the vehicle speed exceeds 10 km/h. For pedestrians and bicycles, PCS operates within a speed range of 10–80 km/h, supporting collision avoidance or damage mitigation when the speed difference with pedestrians is approximately 40 km/h. For stationary vehicles, the system supports collision avoidance or accident mitigation when the vehicle speed is around 50 km/h. When the system detects an imminent collision, it issues an alert and applies braking measures to minimize collision damage.

9

3

Share

How to Test Whether an Oxygen Sensor is Good or Bad?

Methods for testing the quality of an oxygen sensor are as follows: 1. The color observation method can be used to determine the condition. The normal color of the oxygen sensor tip is light gray. Any change in the color of the sensor tip indicates a fault or potential issue with the oxygen sensor. A black-tipped oxygen sensor is caused by carbon contamination; it should be removed and the carbon deposits cleaned off. If the sensor tip appears reddish-brown, it indicates lead contamination, which results from the use of leaded gasoline in the vehicle. 2. Measure the resistance value of the oxygen sensor to assess its condition. After the engine reaches normal operating temperature, disconnect the oxygen sensor's wiring connector and use a multimeter to measure the resistance between the sensor's terminals. The resistance value should meet the standard specifications for the specific vehicle model (typically around 440 ohms). If the resistance value does not meet the requirements, the oxygen sensor should be replaced. 3. Use an automotive diagnostic scanner to check the oxygen sensor. Start the engine and allow it to warm up until the coolant temperature reaches 80°C. Observe the voltage readings from the oxygen sensor on the scanner—the voltage should fluctuate continuously between 0V and 1V. The faster the fluctuation frequency, the better the sensor's performance. If the voltage remains at 0V or 1V without any change, it indicates that the sensor is aged or malfunctioning and needs replacement.

3

2

Share

What to Do When the Car Transmission Fails?

Disassemble the automatic transmission and inspect each component of the planetary gear mechanism for signs of wear, check for any broken gears, examine the one-way overrunning clutch for wear or sticking, and inspect the bearings or thrust washers for damage. If any abnormalities are found, they should be replaced. The correct usage methods for the transmission are as follows: 1. Avoid coasting in N gear: Manual transmissions can coast in neutral, but automatic transmissions absolutely cannot. The principle of an automatic transmission differs from that of a manual transmission; coasting in N gear can easily burn out the transmission. 2. Do not shift to P gear at traffic lights: When waiting at a traffic light, do not shift into P gear (parking gear). If the car behind rear-ends you at this time, it can cause transmission damage. When parking, you can first apply the foot brake and wait until the car comes to a complete stop before shifting to P gear to avoid P gear hesitation. 3. Avoid shifting gears too quickly: Many people often shift from D gear to R gear before the car comes to a complete stop, creating an instant "reverse rotation pressure" that pushes against the reverse gear clutch plates. Over time, this will cause excessive wear on the clutch plates.

19

0

Share

How to Set Up One-Touch Window Control for Audi A3?

Press the button downward to the first stop and release it when the window reaches the desired position. The window can also be controlled using the lock and unlock buttons on the car key. Press the button slightly harder to the second stop, and the window will automatically lower. Hold the unlock button for more than 3 seconds to lower all windows. Pull the button up to the first stop (applying excessive force will reach the second stop), and release it when the window moves to the desired position. Pull the button slightly harder to the second stop, and the window will automatically rise. Hold the lock button for more than 3 seconds to raise all four windows automatically.

19

1

Share

What are the body colors available for the Fit?

How to Shift to Neutral (N) for Towing a Mercedes-Benz?

How Many Types of Materials Are There for Car Body Color Change Films?

What does TSS 2.0 mean?

How to Test Whether an Oxygen Sensor is Good or Bad?

What to Do When the Car Transmission Fails?

How to Set Up One-Touch Window Control for Audi A3?

What brand of tires does the Civic use?

How to Turn Off the Interior Lighting in the Tharu?

Is it safe to leave a power bank in the car during summer?

How Long After Expiration Will Traffic Cameras Capture the Vehicle?