What are the BMW naturally aspirated engines?

1 Answers
MacVera
07/29/25 4:37pm
BMW naturally aspirated engines include the S85, S54B32, N52 engine (including N52B25 and N52B30), S65B40, etc. The S85 engine is a 5.0-liter V10 engine installed in the M5 and M6. Below is an introduction to the N52 engine: BMW's N52 engine (including N52B25 and N52B30) is a glorious engine series, which is an inline-six cylinder engine, hailed as one of the best inline engines in the world and one of the best inline engines in history. To reduce weight, the N52 engine was the first to adopt a magnesium-aluminum engine, and it is also the last generation of civilian magnesium-aluminum engines. The characteristics of the N52 engine include an aluminum-magnesium alloy cylinder block and composite crankcase, second-generation Valvetronic, a three-stage variable valve device, and a dual camshaft variable valve timing system. There are many models equipped with the N52 engine, such as the E90's 325i/330i, E60's 525i/530i, E65's 730i, E70's X5 30i, etc.
Was this review help?
14
2
Share
More Forum Discussions

What is the fuel consumption of the Haval H5?

Haval H5 gasoline version has a fuel consumption of 10.3 liters per 100 kilometers, while the diesel version consumes 8.3 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The initial low-speed acceleration period is the peak fuel consumption zone, so gently pressing the accelerator during startup prevents excessively high RPM and effectively reduces fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds significantly increase fuel consumption. 3. Regular maintenance: Change engine oil and remove carbon deposits. 4. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to glide.
13
1
Share

Where to Renew Driver's License in Heze?

Service Address: Vehicle Management Office of Heze Public Security Bureau Traffic Police Detachment (Business Hall Counters 1-10), East Huanghe Road; Motor Vehicle Registration Service Station (Business Hall Counters 1-10), No.1018 Yinchuan Road, High-tech Zone, Heze City; Motor Vehicle Registration Service Station (Business Hall Counters 1-10), 100m south of the intersection of Changjiang Road and Zhengzhou Road, Heze City. Processing Hours: Summer office hours (May-September) 08:30-12:00 AM and 14:30-18:00 PM on weekdays; Winter office hours (October-April) 08:30-12:00 AM and 14:00-17:30 PM on weekdays.
20
0
Share

What Are the Specifications of Engine Oil Barrels?

Standard oil barrels are 200L, with a diameter of 80CM and a height of 120CM. Methods to prevent leakage from engine oil barrels: 1. Ensure the oil barrel has its own suitable lid and is tightly sealed. 2. Regularly inspect the oil barrel for corrosion, bulges, defects, dents, and leaks. Place defective barrels in an independent secondary packaging barrel or a leak emergency barrel. 3. Ensure the oil barrel is compatible with its contents. For example, do not store acids in ordinary iron barrels or solvents in plastic barrels. 4. Accurately label waste oil barrels.
5
2
Share

How to Solve Water Ingress in a Car?

Here are the solutions for water ingress in a car: 1. Turn off the ignition switch: If water ingress is detected while driving, it is recommended to turn off the ignition switch and avoid attempting to restart the engine. The car should be slowly moved to a dry area. 2. Drain the water inside the cabin: Heavy rain is common in summer. If water is found inside the car cabin, it should be drained promptly to prevent damage to the interior. 3. Remove water from the engine: The engine is the power source of the car. If water is found inside the engine, the first step is to remove the spark plugs to help keep the engine system dry. 4. Maintain the chassis: The chassis is the lowest part of the car. If the car has been driven through water, the chassis should be inspected and maintained promptly to drain any water and apply lubricant.
7
3
Share

What are the solutions for a car door that is difficult to open?

Solutions for a car door that is difficult to open: 1. Spray liquid lubricant on the hinges of the car door. 2. Clean the grease and dirt on the surface of the limiter arm, limiter pin shaft, and connecting bracket, and apply an appropriate amount of grease on the upper and lower surfaces of the arm. 3. Wrap some tape around the door latch. 4. Replace the door seal. The following are the reasons why the car door is difficult to open or close: 1. There is significant friction between the door handle lock and the lock post, and prolonged use leads to poor lubrication. 2. The door lock post is misaligned. 3. The door hinge is rusted or deformed after long-term use.
8
5
Share

What Causes the Noise in the Car's Air Conditioning Expansion Valve?

The reason for the noise in the car's air conditioning expansion valve is that the expansion valve is blocked. Below is an introduction to the causes of air conditioning not cooling: 1. Internal damage: Severe internal wear of the compressor leads to its inability to function properly. 2. Oil stains: The presence of oil stains at connections or seams indicates refrigerant leakage, requiring reinforcement or replacement of related parts. 3. Circuit system failure: Circuit system failures causing the car's air conditioning compressor to malfunction are also very common. You can check if the circuit is unobstructed, inspect the temperature sensor solenoid valve, and other potential fault causes. 4. Low-pressure gauge reading much lower than normal: The surface temperature of the compressor suction pipe is lower than normal, appearing damp and cold (commonly known as sweating).
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.