What are the benefits of upgrading to forged wheels?

1 Answers
DiMolly
07/29/25 5:57pm
The benefits of upgrading to forged wheels are: forged wheels have high strength, are less prone to damage or breakage, and can enhance driving safety. The wheel hub is the rotating part of the wheel that connects the tire's inner rim to the wheel center via spokes, supporting the tire's central metal component mounted on the axle. Maintenance methods include: 1. When the vehicle is in a humid area, the wheel hub should be cleaned frequently to prevent salt corrosion on the aluminum surface; 2. If necessary, after thorough cleaning, apply wax to the wheel hub to maintain its shine; 3. When the wheel hub is hot, allow it to cool naturally before cleaning. Avoid using cold water for cleaning, as it can damage the aluminum wheel hub, cause brake disc deformation affecting braking performance, and using detergents can lead to chemical reactions on the wheel hub surface, resulting in loss of shine.
Was this review help?
4
5
Share
More Forum Discussions

What are the speed ranges for matching car gears?

Car gear matching speeds are as follows: 1. 1st gear corresponds to 10 to 20 kilometers per hour; 2. 2nd gear corresponds to 20 to 30 kilometers per hour; 3. 3rd gear corresponds to 30 to 40 kilometers per hour; 4. 4th gear corresponds to 40 to 50 kilometers per hour; 5. 5th gear corresponds to 50 to 60 kilometers per hour; 6. 6th gear corresponds to speeds above 60 kilometers per hour. Manual transmission cars have gears including 1st, 2nd, 3rd, 4th, 5th, and R (reverse) gears. A manual transmission car refers to a vehicle that uses a manual gear-shifting mechanical transmission to regulate speed, meaning that manually moving the gear lever can change the gear meshing positions inside the transmission, altering the gear ratio to achieve speed variation. The clutch must be depressed to move the gear lever.
11
4
Share

Where is the air filter for BMW 525 located?

The air filter for BMW 525 is located under the decorative panel beneath the glove compartment on the passenger side. Commonly known as the cabin air filter, its function is to filter the air entering the vehicle cabin from the outside, thereby improving air cleanliness. Taking the 2021 BMW 525 as an example, it belongs to the mid-to-large-size car category with body dimensions of: length 5106mm, width 1868mm, height 1500mm, and a wheelbase of 3105mm. The 2021 BMW 525 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 184PS, maximum power of 135kW, and maximum torque of 290Nm, paired with an 8-speed automatic transmission.
18
0
Share

What engine does the Geely GS use?

Geely GS engine is a naturally aspirated engine, independently developed by Geely Auto, so it belongs to domestic engine. The engine model used in Geely GS is JLY-4g15, with a maximum power of 80kW, maximum horsepower of 109, and maximum torque speed of 140N·m. For daily maintenance of Geely GS engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, and the selection standard should not be lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which will bring various problems to the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil volume should be moderate; When the oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall life of the radiator and engine.
12
0
Share

When is the first maintenance for the Mazda3?

The first maintenance for the Mazda3 is at 5,000 km or 3 months, whichever comes first. Car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, and power steering system. Taking the 2021 Mazda3 as an example, it belongs to the compact car category with body dimensions of 4,662 mm in length, 1,797 mm in width, 1,445 mm in height, and a wheelbase of 2,726 mm. The 2021 Mazda3 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117 PS, a maximum power of 86 kW, and a maximum torque of 148 Nm, paired with a 6-speed manual transmission.
1
4
Share

How to Turn Off BMW Daytime Running Lights?

In the settings, find the lighting options to turn off the daytime running lights. Daytime running lights are a new type of signal light, mainly used in poor visibility conditions while driving. The primary purpose of daytime running lights is to create a signal in foggy or rainy driving conditions, allowing other road users to spot the vehicle earlier. Here is some information about BMW: 1. Logo Meaning: B.M.W. stands for Bavarian Motor Works, and the colors and design of the logo are derived from the coat of arms of Bavaria, where BMW is headquartered. 2. Brand Honors: On December 18, 2018, the "2018 World's 500 Most Influential Brands" list compiled by the World Brand Laboratory was announced, with BMW ranking 16th.
5
2
Share

Is it normal for gas to spray out when opening the fuel tank cap?

Normal. Here are the relevant explanations: 1. Gaseous gasoline When opening the fuel tank cap and gas sprays out, this situation mostly occurs in summer. Gasoline is a rapidly evaporating liquid. When the liquid turns into gas, its volume increases. The gas you feel is actually gasoline, but in its gaseous state. 2. Pressure difference: During hot summer weather, the fuel pump inside the tank also generates heat when operating. Both gas and liquid expand when heated, with gas having a higher expansion rate than liquid. However, the entire fuel tank is a sealed space with a fixed volume. Therefore, the gaseous gasoline sealed inside the tank creates pressure that is higher than the external atmospheric pressure. Once the fuel tank is opened, a pressure difference is created between the inside of the tank and the atmospheric environment, causing the high-pressure gaseous gasoline inside the tank to spray out.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.