What are the benefits of modifying a car's exhaust system?

1 Answers
MacKathryn
07/30/25 12:48am
Benefits of modifying a car's exhaust system: 1. Modifying the header: Allows for smoother exhaust flow, making it easier for the car to unleash horsepower during high-speed driving; 2. Modifying the mid-section: Reduces exhaust resistance after modification, thereby improving the vehicle's power performance at high RPMs; 3. Modifying the tail section: Generally involves the muffler, with no significant difference post-modification except for a much louder sound. The car's exhaust system primarily discharges the waste gases produced by the engine while reducing pollution and noise from the exhaust. The car exhaust system is mainly used for light vehicles, compact cars, buses, motorcycles, and other motor vehicles.
Was this review help?
11
0
Share
More Forum Discussions

What is the model of the Mondeo fog light?

The model of the Mondeo fog light is H7. The function of the fog light is to make other vehicles see the car when visibility is affected by weather conditions such as fog or rain, so the light source of the fog light needs to have strong penetration. Generally, vehicles use halogen fog lights, and LED fog lights are more advanced than halogen fog lights. The following are the classifications of car lights: 1. Headlights: Combined headlights are located at the front of the car, mainly serving the purpose of lighting and signaling. The light emitted by the headlights can illuminate the road conditions in front of the car body, allowing the driver to drive safely at night. 2. Combined taillights: Combined taillights are located at the rear of the car, mainly serving the purpose of lighting and signaling. 3. Turn signals: Used to indicate to other road users that the car is turning left or right. Regulations require them to be amber in color. 4. License plate lights: License plate lights are mainly used to illuminate the license plate, allowing people to identify the vehicle license plate at night.
3
0
Share

How to Drive the Buick New Excelle for Better Fuel Efficiency?

There are several methods to drive the Buick New Excelle more fuel-efficiently: 1. For most automatic transmission vehicles, the basic gears include P (Park), R (Reverse), N (Neutral), and D (Drive). Proper use of the automatic transmission is essential for better fuel efficiency. When driving on flat urban roads, keep the gear in D, as the automatic transmission will shift between the four forward gears without requiring additional manual operation. 2. For short stops, such as at a brief traffic light, simply hold the brake. However, if the stop exceeds 20 seconds, shift to N to protect the transmission and prevent overheating of the transmission fluid. If stopping for more than 2 minutes, it's best to turn off the engine—both eco-friendly and fuel-saving. 3. Avoid flooring the accelerator during startup or acceleration, as this only increases RPM, causing engine strain, transmission wear, and unnecessary fuel consumption. Instead, gently press the accelerator, utilizing low-speed downshifting to increase torque for smoother acceleration. Gradually build speed before accelerating further for a smoother driving experience. 4. When climbing hills in D gear, if the accelerator doesn't provide sufficient power as on flat roads, immediately shift to a lower gear with higher torque. For steep inclines, switch to manual mode and use 1st gear. On urban roads with slopes, avoid sudden acceleration; instead, accelerate before the slope to gain momentum. 5. Heavy acceleration and braking are major contributors to high fuel consumption. Looking ahead and easing off the throttle early can significantly save fuel, without being slower than accelerating hard and braking abruptly at the last moment.
3
1
Share

How to Replace the Air Conditioning Filter for Tiggo 3

Below are the steps to replace the air conditioning filter for Tiggo 3: 1. First, remove the clip located at the front of the co-pilot side in the engine compartment, then take out the sound insulation cotton. 2. Remove the filter. After taking out the sound insulation cotton, reach inside to remove the baffle. 3. Reach in again to take out the air conditioning filter. Note that there is an arrow indicator on the outer side of the filter; avoid installing it backward. Additional Information: 1. The air conditioning filter is a type of filter installed in the car's air conditioning system. It can absorb dust particles, reduce respiratory discomfort, minimize irritation for allergy sufferers, and protect the air conditioning cooling system. 2. The air conditioning filter should not be exposed to direct sunlight; it should be dried before reinstallation. If it is excessively dirty, replacement is recommended. Generally, the air conditioning filter should be replaced every two minor maintenance intervals, approximately every 10,000 kilometers, depending on the condition of the filter.
10
0
Share

How to Replace the Coolant in a New Sagitar?

New Sagitar coolant replacement method is: 1. Open the vehicle's engine hood, and you can see the coolant reservoir in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete. Extended content: Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of: length 4753mm, width 1800mm, height 1642mm, wheelbase 2731mm, minimum ground clearance 130mm, fuel tank capacity 50L, trunk capacity 553L, and curb weight 1355kg.
3
5
Share

How much engine oil should be added to a BMW 525?

For a BMW 525, adding 5.5 liters of engine oil during each maintenance service is sufficient. Engine oil is extremely crucial for a car's engine, often referred to as the 'blood' of the engine. Without engine oil, the engine cannot function properly. Engine oil serves multiple purposes within the engine, including lubrication, cleaning, sealing, cushioning, rust prevention, and heat dissipation. Here are some key points to note when changing engine oil: 1. Drain the oil when it's warm: The oil flows better when warm, allowing it to drain more effectively from the oil holes, but be cautious not to overheat it to avoid burns. 2. Fill to the dipstick mark: The amount of oil added should be strictly controlled between the lower and upper marks on the dipstick. 3. Choose the oil change interval based on factors such as vehicle condition, road conditions, oil quality, and driving habits. 4. Select the oil grade according to the driving environment, driving frequency, and the engine's specific requirements—preferably higher rather than lower. 5. Do not substitute winter oil for summer oil or vice versa; change the oil when seasons change. Additionally, diesel and gasoline engine oils must not be mixed and should be strictly differentiated.
5
0
Share

What is the battery model of the Chery Fengyun 2?

The original battery model for the Chery Fengyun 2 is the Fengfan battery 6-QW-60, with a rated capacity of 60Ah, a rated voltage of 12V, and a maximum current of 480A. The battery, also known as a storage battery, is a type of cell that works by converting chemical energy into electrical energy. Here are some maintenance tips for car batteries: 1. Avoid deep discharge. Deep discharge refers to the state where the battery is not charged in time after use, which can easily lead to sulfation. Lead sulfate crystals adhere to the plates, blocking the ion channels and causing insufficient charging, thereby reducing the battery capacity. The longer the battery remains in a deep discharge state, the more severe the damage. When the battery is not in use, it should be charged once a month to extend its service life. 2. Regular inspection is necessary. During use, if the electric bicycle's range suddenly drops by more than ten kilometers in a short period, it is likely that at least one battery in the group has issues such as broken grids, softened plates, or shedding of active material from the plates, leading to short circuits. In such cases, it is advisable to promptly visit a professional battery repair facility for inspection, repair, or replacement. 3. Prevent exposure to high temperatures. An excessively high-temperature environment can increase the internal pressure of the battery, forcing the pressure relief valve to open automatically. The direct consequence is an increase in water loss from the battery, which inevitably leads to a decline in battery activity, accelerated plate softening, and fatal damages such as heating of the casing during charging, bulging, and deformation.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.