What are the benefits of installing a shark fin antenna on a car?

Is the Avalon produced by FAW Toyota or GAC Toyota?

The Avalon is produced by FAW Toyota. As Toyota's flagship model, the Avalon features a massive front grille design that delivers a visually striking impact. The vehicle has a lower profile with a more steeply raked A-pillar and smoother body lines. Its dimensions are 4975mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2870mm. The rear design of the Avalon is uniquely three-dimensional, and the body-color trunk lid with spoiler is exclusive to gasoline models. The interior materials of the Avalon exude a premium feel visually, with no difference in materials used on the dashboard between the base model and higher trims. Under the hood, the Avalon is powered by a 2.5L naturally aspirated engine, delivering a maximum power of 154kW and a maximum torque of 250Nm, paired with an 8-speed automatic transmission. The official combined fuel consumption is 6.2L per 100km.

15

2

Share

What suspension does the Yuexiang V3 use?

The Yuexiang V3 uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear. The MacPherson suspension is a widely used independent suspension with a simple structure, featuring only an L-shaped control arm, which hardly occupies any space in the engine compartment. The multi-link independent suspension is a common type of independent suspension, derived from the double-wishbone independent suspension, and it enhances the wheel's ground contact and grip performance. The Yuexiang V3 is a classic sedan introduced by Changan Automobile, known for its agile appearance, ultra-low fuel consumption, efficient power, comprehensive safety features, and cost-effective rich configurations. It brings a new level of superior comfort and quality driving experience to the entry-level family car market.

9

1

Share

Does the traffic ETC need to be charged?

ETC does not need to be charged as it uses its own built-in power source. The ETC electronic tag consumes power, but it does not require regular battery charging during normal use because there is a solar panel on the back of the battery that can charge itself. During installation, it is necessary to avoid the black areas on the windshield. The built-in power source of ETC typically has a lifespan of 3-5 years. ETC is the abbreviation for Electronic Toll Collection, meaning electronic toll system. To apply for ETC, you need to provide the original and photocopy of the vehicle owner's valid ID card and driving license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the driving license should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed. Applicants must be between 18 and 60 years old, and the vehicle must be registered under an individual's name. How ETC works: The vehicle-mounted electronic tag installed on the windshield communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, it settles the toll with the bank in the background, allowing the vehicle to pass through highway or bridge toll stations without stopping to pay the toll. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel by reducing noise, exhaust emissions, and pollution as vehicles pass through toll stations without stopping; Cost-saving: Reduces costs by decreasing the frequency of vehicle starts and stops, minimizing wear and fuel consumption, and users can enjoy toll discounts; Improved efficiency: The ETC lane theoretically increases traffic efficiency by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

1

4

Share

Why Can't the 10th Generation Accord Connect to Bluetooth?

The reasons why the 10th Generation Accord cannot connect to Bluetooth: 1. The wireless network distance is too far, resulting in poor signal reception; 2. Insufficient battery power or poor battery quality leading to low voltage; 3. The mobile phone system is incompatible with the car's Bluetooth system; 4. Bluetooth headset malfunction, it is recommended to send it to after-sales service for handling. Solutions for Bluetooth connection failure: 1. Disconnect the WIFI signal on the phone and try to reconnect; 2. Disconnect the device, reduce the distance and re-match the signal; 3. Insufficient Bluetooth battery power or poor battery quality leading to low voltage, charge the Bluetooth or replace the battery; 4. Poor Bluetooth signal reception, connect the phone to another Bluetooth device. If there is no such problem, it is an issue with the car's Bluetooth, and the car's Bluetooth should be repaired. The 10th Generation Accord is a car launched by GAC Honda, with a very youthful appearance, equipped with a 1.5T turbo engine.

18

3

Share

Where is the OBD fuse located?

Generally, there are two fuse boxes in a vehicle, which contain the fuses for the car. Below is relevant information about automotive fuses: 1. Function: In a car's electrical circuit, many electrical devices are connected by wires of different colors, among which the fuse is the most crucial. The term 'fuse' is a conventional name, referred to as a 'circuit breaker' in national standards. The role of a fuse is to protect the circuit (wiring) and electrical equipment. 2. Parameters: Fuses have two important parameters: one is the rated current, and the other is the rated voltage. When selecting a fuse, it's necessary to choose the appropriate specification based on its current and voltage ratings. 3. Classification: Automotive fuses are divided into high-current fuses and medium-low current fuses. Medium-low current fuses are more common in general vehicles, and they are further classified into blade-type fuses, fork-bolt fuses, screw-type fuses, and tube-type fuses. Among these, the most commonly encountered are medium and mini fast-acting blade-type fuses.

14

2

Share

How to Determine if the Tensioner Pulley is Faulty?

Methods to determine if the tensioner pulley is faulty: sudden increase in engine noise during rapid acceleration (especially around 1500 RPM), timing belt skipping teeth, ignition and valve timing disorder, engine shaking, difficulty in ignition (severe cases may result in failure to start). When these symptoms occur, the tensioner pulley should be checked for damage. Experienced drivers can often determine the condition of the tensioner pulley by manually feeling its tightness or by listening to the sound. The tensioner pulley consists of components such as a fixed housing, tension arm, pulley body, torsion spring, rolling bearing, and spring bushing. It automatically adjusts the tension according to the varying tightness of the belt, ensuring the stability, safety, and reliability of the transmission system. The tensioner pulley is a wear-prone component in a vehicle. Over time, rubber belts naturally stretch and lengthen. The tensioner pulley helps maintain smoother belt operation, reduces noise, and prevents slippage.

20

1

Share

What are the benefits of installing a shark fin antenna on a car?

Is the Avalon produced by FAW Toyota or GAC Toyota?

What suspension does the Yuexiang V3 use?

Does the traffic ETC need to be charged?

Why Can't the 10th Generation Accord Connect to Bluetooth?

Where is the OBD fuse located?

How to Determine if the Tensioner Pulley is Faulty?

Where is the license plate Yun Z from?

What is the normal pressure range for a supercharger?

How to Handle Insurance When a Car is Scrapped?

Why is new engine oil as thin as water?