What are the benefits of full-service maintenance at 4S stores?

1 Answers
DiLevi
07/29/25 5:31pm
The benefits of full-service maintenance at 4S stores are as follows: 1. Professionalism: Professional personnel are the guarantee of maintenance quality. The after-sales service staff at 4S stores are highly qualified, and it takes two to three years to train a maintenance technician. Every employee in the after-sales service has a solid theoretical foundation before joining the store, and only such qualified personnel are allowed to perform maintenance and repair operations. 2. Genuine parts: The original factory maintenance parts for cars are sourced from genuine and unified channels, ensuring both quality and price consistency. 3. Strict operational procedures: At 4S stores, the maintenance operational procedures are quite strict. It is clearly specified how maintenance should be performed after a certain mileage, which parts need to be replaced, and the cost standards for each procedure, making it clear to customers. If some parts need to be replaced before their designated service life, the 4S store will also seek the owner's consent before proceeding with repairs or replacements.
Was this review help?
17
4
Share
More Forum Discussions

How to Turn Off the Radio in Volkswagen Lavida?

To turn off the radio in Volkswagen Lavida, follow these methods: 1. Switch to multimedia or other modes to turn off the radio; 2. Press the mute button to turn off the radio; 3. Remove the car key. Taking the 2021 Volkswagen Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, fuel tank capacity 51l, and trunk capacity 510l. The 2021 Volkswagen Lavida is equipped with a 1.4t turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, and is paired with a 7-speed dual-clutch transmission.
20
0
Share

What is the Buick Excelle engine?

The all-new Buick Excelle continues to use the small-displacement 1.0T and 1.3T three-cylinder engines, with the engine model being LJI. Here is the relevant information: Buick Excelle Engine Overview: Thanks to the adoption of Ecotec dual-injection turbocharging technology, this 1.0T three-cylinder engine can sustain maximum torque output from 1500 rpm to 5200 rpm. In comparison, the previous-generation 1.5L four-cylinder engine only reached maximum torque at 4400 rpm, making the new version more powerful. The Excelle features a 1.3T dual-injection turbocharged engine built on a new small-engine architecture, delivering a maximum power of 120 kW and a maximum torque of 230 N·m. It not only outperforms the previous-generation models but also achieves better fuel efficiency. Advanced turbocharging technology significantly mitigates the traditional drawback of delayed power response in turbocharged engines, ensuring strong low-rpm torque for quicker acceleration. Engine Working Principle: An engine is a machine that converts one form of energy into mechanical energy. Its function is to transform the chemical energy of burning liquid or gas into thermal energy through combustion, and then convert the thermal energy into mechanical energy via expansion to output power. An engine is a complex machine composed of numerous mechanisms and systems. Whether it's a gasoline or diesel engine, a four-stroke or two-stroke engine, or a single-cylinder or multi-cylinder engine, its purpose is to complete energy conversion, achieve a working cycle, and ensure long-term continuous operation.
5
5
Share

What car brand has three shields?

Three shields represent the Buick automobile brand, whose models include: Buick GL, LaCrosse, Regal, Envision, Excelle, etc. Taking the 2020 Buick GL8 as an example, its body dimensions are: length 5219mm, width 1878mm, height 1805mm, with a wheelbase of 3088mm and a fuel tank capacity of 71L. The 2020 Buick GL8 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, a maximum power of 174kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
16
5
Share

What Causes a Heavy Clutch?

The reasons for a heavy clutch pedal include the inherent characteristics of the car's clutch, severe wear of the clutch cable, increased resistance due to grease applied on the release bearing seat, and thinning of the clutch disc. Inherent characteristics of the car's clutch: The resistance when pressing the clutch mainly comes from the diaphragm spring of the pressure plate. Because the diaphragm spring needs to be pressed down to disengage the clutch, some cars have larger pressure plates with stronger diaphragm springs, making the clutch heavier. Some cars have smaller pressure plates with weaker diaphragm springs, resulting in a lighter clutch. This is an inherent factor, but it can be altered by replacing the clutch drive rocker arm on the transmission side. A longer rocker arm increases leverage, making it easier to press the clutch, but the working travel of the clutch will become longer, meaning the distance the clutch pedal moves from the start of semi-engagement to full engagement will be greater. Severe wear of the clutch cable: Many cars still use a cable-operated clutch. The clutch cable has a hard outer tube, a nylon sleeve inside, and a steel cable within. Over time, the nylon sleeve wears severely, causing the steel cable to embed into the sleeve, increasing friction. Adding lubricant at this stage has little effect, and the resistance of the clutch pedal can double. Therefore, if a cable-operated clutch feels heavier, it is mostly due to severe wear of the clutch cable. Increased resistance due to grease applied on the release bearing seat: When pressing the clutch, the release bearing moves back and forth on its seat. Some people think adding lubricant or grease here can prevent wear, but this can actually make the clutch heavier. Grease itself has resistance, especially for sliding friction components like the release bearing and its seat. Normally, grease is applied inside bearings because they involve rolling friction, where the resistance from grease is relatively smaller. Additionally, dust generated during clutch use can adhere to the lubricant, further increasing the resistance between the release bearing and its seat. Thinning of the clutch disc: When the clutch disc becomes thinner, the friction surface of the pressure plate, under the action of the diaphragm spring, moves forward to compensate for the reduced distance, ensuring sufficient clamping force. This causes the diaphragm spring to tilt upward, changing the angle of force between the release bearing and the diaphragm spring, requiring more force to press the diaphragm spring.
19
0
Share

What is the method for removing the rearview mirror of the Baojun 560?

The method for removing the rearview mirror of the Baojun 560 is: 1. Unscrew the three screws at the bottom of the rearview mirror; 2. Remove the rearview mirror. Taking the 2017 Baojun 560 as an example, it belongs to the compact SUV category, with body dimensions of: length 4670mm, width 1810mm, height 1755mm, wheelbase of 2750mm, fuel tank capacity of 52 liters, and trunk capacity of 460 liters. The 2017 Baojun 560 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 230Nm, paired with a 6-speed manual transmission.
8
5
Share

Which automotive brand does the Qashqai belong to?

The Qashqai is a brand under Dongfeng Nissan, classified as a compact SUV. Its body dimensions are: length 4401mm, width 1837mm, height 1593mm, with a wheelbase of 2646mm, front track of 1585mm, rear track of 1581mm, fuel tank capacity of 57 liters, trunk capacity of 486 liters, and a curb weight of 1444kg. Taking the 2020 Qashqai as an example, it is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, maximum power of 111kW, maximum torque of 194Nm, paired with a 7-speed continuously variable transmission.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.