What are the benefits of cleaning fuel injectors?

1 Answers
LouisLynn
07/29/25 9:14pm
Vehicle exhaust emission pollution can be improved. When fuel injectors malfunction due to carbon deposits, the mixing and combustion of combustible gas mixtures are affected, leading to increased vehicle exhaust pollution. Additional relevant information is as follows: 1. A fuel injector is essentially a normally closed valve. When the electromagnetic coil is energized, it generates suction that lifts the needle valve, opening the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a mist that facilitates complete combustion. 2. As one of the key components of an electronic fuel injection engine, the performance of the fuel injector significantly impacts the engine's overall performance.
Was this review help?
7
0
Share
More Forum Discussions

Where is the automotive urea placed in the vehicle?

Automotive urea is filled in a dedicated urea storage tank, which is located near the fuel tank. The reason for adding urea to diesel vehicles is mainly to reduce exhaust emissions, as the exhaust from diesel engines primarily consists of nitrogen oxides and carbon particles. Excessive nitrogen oxide concentrations can affect human pulmonary function and the central nervous system. Automotive urea is an essential additive for the SCR (Selective Catalytic Reduction) system. The SCR system includes a urea tank and an SCR catalytic reaction tank. The operating process is as follows: when nitrogen oxides are detected in the exhaust pipe, the urea tank automatically sprays diesel exhaust fluid. The diesel exhaust fluid and nitrogen oxides undergo a redox reaction in the SCR catalytic reaction tank, producing non-polluting nitrogen and water vapor, which are then discharged.
15
2
Share

Why Can't the Brake Be Pressed When Using One-Button Start?

One-button start brake cannot be pressed because the driver did not follow the correct steps to start the car. For cars equipped with one-button start, the correct operation is to first press the one-button start once, then press the brake, and simultaneously press the one-button start key again to complete the car's startup. When starting a car with one-button start function, it is necessary to press the one-button start button once before pressing the brake. The purpose is to allow the car to perform a quality check before starting. After the self-check is completed, you can press the one-button start button again and simultaneously press the brake pedal. At this time, the situation where the brake pedal cannot be pressed will not occur.
13
4
Share

What maintenance is required at 20,000 kilometers for a car?

Maintenance at 20,000 kilometers primarily includes replacing the engine oil, oil filter, spark plugs, cabin air filter, and engine air filter. Oil and oil filter changes are essential biannual services, as their performance degrades and shelf life significantly shortens under high-temperature and high-pressure conditions. The oil filter mainly prevents impurities from entering the oil and forming sludge that could clog the oil passages. Car maintenance, also known as vehicle servicing, refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain components as preventive measures. Its purpose is to maintain the vehicle's appearance, ensure normal technical conditions, eliminate potential hazards, prevent malfunctions, and extend the vehicle's service life.
3
3
Share

What Are the Solutions for Stiff Car Window Operation?

Solutions for stiff car window operation include: 1. Use a chopstick wrapped with a towel to clean the window guide channel. Adjust the number of towel layers based on the channel width for optimal thickness. Move the wrapped chopstick up and down inside the channel to remove dirt, periodically cleaning the towel until all debris is removed; 2. If the issue persists, visit a 4S shop for professional cleaning of the motor. If the window motor is damaged or the wiring harness has poor contact, prolonged pressing of the window button may produce a burning smell or strange noises from the door panel, indicating potential motor failure. In such cases, it is advisable to visit a 4S shop or auto repair shop for motor replacement.
3
4
Share

What are the differences between the Boyue Pro and the Boyue?

The differences between the Boyue Pro and the Boyue are: 1. Different body dimensions: The Boyue Pro has a body length of 4544mm, width of 1831mm, and height of 1713mm; the Boyue has a body length of 4519mm, width of 1831mm, and height of 1694mm. 2. Different engines: The Boyue Pro is equipped with a 1.5T turbocharged engine; the Boyue is equipped with a 1.8T turbocharged engine. 3. Different tire specifications: The Boyue Pro has tire specifications of 225/60R18; the Boyue has tire specifications of 225/65R17.
9
0
Share

How to check if ETC is working normally?

Methods to check if ETC is working normally: After pressing the anti-tamper button on the back of the device, if the OLED light flashes red and displays messages like "Please insert card," it indicates that the car owner's ETC device is functioning properly. You can also check if there are any issues with the ETC circuit board. If problems such as a blurry screen or no response after pressing the power button occur, it is likely that there is an issue with the circuit board. You can seek after-sales service or take it to the highway service office for resolution. Do not attempt to disassemble the ETC device manually, as this may cause irreparable damage. If the damage is not caused by human intervention, the possibility of repair is still quite high.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.