What are the benefits of aluminum alloy suspension?

How to Charge New Energy Vehicles at Home?

New energy vehicles need to be charged using charging piles, and you can directly charge them using a charging pile installed at home. Here is more information about new energy vehicles: 1. When a new energy vehicle is exposed to direct sunlight, it can cause an increase in internal pressure in the battery, leading to water loss. This reduces the battery's activity, accelerates the aging of the battery plates, and shortens the battery's lifespan. 2. During normal driving, if the battery indicator shows red or yellow lights, it's time to charge. Generally, the average charging time for a new energy vehicle's battery is about 10 hours. Avoid overcharging to prevent damage. If the battery temperature exceeds 65°C during charging, stop charging immediately. 3. If the driving range of a new energy vehicle suddenly drops significantly by more than a dozen kilometers in a short period during normal operation, it may indicate a problem with one of the battery cells, and an immediate inspection is required.

4

0

Share

Can You Continue Driving When Pressure Loss is Detected?

Detected pressure loss refers to abnormal tire pressure. You can first use the tire pressure warning reset button to clear the alert and see if it reappears. 1. If the warning continues, it indicates a problem. In this case, you should not continue driving the car and should promptly go to a 4S shop or a professional auto repair shop to have the tire repaired. 2. If the warning does not reappear after clearing it, it is likely a false alarm. You can continue driving at this time, but you should also pay attention to the driving conditions afterwards. Here are some measures to prevent car tire blowouts: 1. Regularly check the tires for damage or bulges, and develop the habit of inspecting the tires. 2. Do not pour cold water on the tires to cool them down in summer. 3. Maintaining appropriate tire pressure is an important measure to prevent car tire blowouts. 4. Try to avoid potholed roads as much as possible.

2

Share

What Are the Impacts on Car Owners for Not Scrapping Their Vehicles?

If a vehicle meets the scrapping standards but continues to be driven on the road, the traffic management department will confiscate it and enforce mandatory scrapping. Additionally, the driver will face a fine ranging from 200 to 2,000 yuan and have their motor vehicle driving license revoked. Below is the operational process for scrapping a vehicle: 1. The vehicle owner applying for scrapping and renewal must fill out and submit the "Motor Vehicle Change, Transfer, Modification, Suspension, and Scrapping Approval Application Form," stamped with the owner's seal. 2. Apply at the registration and acceptance counter. For vehicles that have reached the scrapping age limit, the "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age limit, the motor vehicle inspection counter will determine if they meet the scrapping standards and issue the "Vehicle Scrapping Notice." 3. The vehicle owner can choose a qualified recycling company to dismantle the vehicle by presenting the "Notice." 4. After verifying the "Notice," the recycling company will dismantle the vehicle and take photographs. The engine must be separated from the vehicle, the engine block must be broken, and the chassis must be cut. 5. The vehicle owner must submit the "Change Form," "XX Province Vehicle Renewal Technical Appraisal Form," "Scrapped Vehicle Recycling Certificate," and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed according to regulations.

15

5

Share

How to Clean Spark Plugs?

Methods for cleaning spark plugs: 1. White Vinegar Cleaning Place the spark plugs in a glass container and pour white vinegar over them until fully submerged. For light carbon deposits, soak for 2-3 hours; for severe deposits, soak for 4-5 hours. After soaking, gently scrub with a hard-bristle toothbrush to restore their appearance. Shake off the vinegar and let them air-dry naturally. Do not rinse with water. 2. Carburetor Cleaner Place the spark plugs upside down in a glass bottle and spray carburetor cleaner into the bottle, ensuring it covers the spark plugs without spilling. Close the lid securely—since the cleaner is flammable, fire safety is crucial. After about 30 minutes, remove the spark plugs and scrub them with a toothbrush while spraying more cleaner. Finally, air-dry or use a blow dryer. 3. Blue Toilet Cleaner Soak the spark plug electrodes directly in undiluted toilet cleaner. You will observe bubbles forming due to the chemical reaction with carbon deposits. Leave in a ventilated area for 10 minutes until bubbles diminish. If black deposits remain, soak longer, then rinse with white vinegar (not water) and air-dry. 4. Professional Cleaning at a 4S Shop or Repair Shop This is the simplest method: drive to a 4S shop or repair shop and pay professionals to handle it. However, they often replace rather than clean the spark plugs, so budget accordingly. Among these methods, using carburetor cleaner is the best option. It is specifically designed to tackle oil, grease, and carbon deposits without damaging the spark plugs. Additionally, carburetor cleaner is very affordable. Symptoms of Damaged Spark Plugs: Damaged spark plugs may cause the following issues: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption.

16

1

Share

What is the mat in front of the car called?

The mat placed in front of the car, below the windshield, is called a dashboard sunshade mat. It serves both decorative purposes and helps prevent glare from the dashboard. Below are the installation steps for the sunshade mat: 1. To ensure the rolled dashboard mat lies flat, first reverse-roll it and then unfold it. 2. Use a damp cloth and cleaning solution to remove any hard debris left on the dashboard. Then place the sunshade mat on the cleaned dashboard. 3. Attach the adhesive strips to the designated positions. 4. Next, affix the dashboard mat onto the adhesive strips, aligning it properly with sensor and air vent locations during installation. 5. To secure the installed dashboard mat more firmly, gently smooth it out towards both the driver's and passenger's sides with your hands.

19

5

Share

How to Alternate Between High Beam and Low Beam Headlights?

Here are the specific steps to alternate between high beam and low beam headlights: 1. In low beam mode, lift the combination light switch upward to switch to high beam; release the manual combination switch to reset to low beam. 2. There is a combination light switch on the left side of the steering wheel. At night, rotating the combination switch one notch forward turns on the instrument panel lights, rotating another notch turns on the low beam, and continuing to rotate another notch turns on the high beam. Here are the precautions for using high beam and low beam headlights: 1. On roads without central isolation facilities or center lines, do not use high beams when meeting an oncoming vehicle within 150 meters. 2. Do not use high beams when meeting non-motorized vehicles on narrow bridges or narrow roads without central isolation facilities or center lines. 3. When overtaking at night, alternate between high and low beams to alert the vehicle ahead. 4. When driving at night without streetlights, poor lighting, or in low visibility conditions such as fog, rain, snow, or dust, do not use high beams when a following vehicle is driving close to the vehicle in front in the same direction.

16

3

Share

What are the benefits of aluminum alloy suspension?

How to Charge New Energy Vehicles at Home?

Can You Continue Driving When Pressure Loss is Detected?

What Are the Impacts on Car Owners for Not Scrapping Their Vehicles?

How to Clean Spark Plugs?

What is the mat in front of the car called?

How to Alternate Between High Beam and Low Beam Headlights?

What are the methods to determine engine oil burning?

What is the meaning of tank turn?

How to Remove the Car Seat Headrest?

What does it mean to check tire pressure?