What are the battery specifications for the Langdong?

3 Answers
AlessandraLee
07/29/25 5:41pm
The battery specification for the Langdong is 12V 60Ah. The car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. The Langdong has a body length, width, and height of 4570mm, 1775mm, and 1445mm respectively, with a wheelbase of 2700mm. The car's steering wheel features a variety of multifunction buttons, integrating controls for the audio system, cruise control, Bluetooth phone, and more. The Langdong's seats are treated with a fine pattern, giving them a high-quality feel. The seats are thick, soft yet supportive, providing a comfortable seating experience. In terms of comfort features, the driver's seat offers 10-way electric adjustment and is equipped with a lumbar adjustment function.
Was this review help?
6
4
Share
VanFelicity
08/14/25 9:05am
I've been driving a Hyundai Elantra for several years and recently replaced the battery, so I'd like to share my experience. The standard specifications are 12 volts with a capacity of about 60 ampere-hours, and a cold cranking amperage around 550 amps, which ensures smooth starts even in winter. The battery dimensions are typically 278 mm in length, 175 mm in width, and 190 mm in height, making it a common model that's easy to find in auto parts stores. It's important to avoid draining the battery—for example, turn off all electronics after parking. The lifespan is generally three to five years, so regularly check it with a voltmeter; if the voltage drops below 12.4 volts, it's time to consider a replacement. Paying attention to these small details can save a lot of hassle, especially during long-distance drives.
Was this review help?
18
4
Share
Expand All
LaMargaret
08/14/25 9:06am
As someone with basic car knowledge, the Hyundai Elantra's battery core specifications are a 12V system. The 60Ah capacity means it can provide 60 amps of current for one hour, with a Cold Cranking Amps (CCA) of about 550A, ensuring reliable starts even in sub-zero temperatures. The dimensions are 278×175×190mm - when choosing a new battery, these numbers must match, otherwise you may experience starting difficulties or circuit damage. It's recommended to check for terminal corrosion and keep them clean every two years. If you frequently take short trips, the battery is prone to discharging - using a charger to top it up can extend its lifespan. Simple maintenance can prevent the embarrassment of a breakdown.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What is the wading depth standard for pure electric vehicles?

Pure electric vehicles have a wading depth standard of 15cm. Below is an introduction to the wading standards and local standards: Introduction to wading standards: The wading standards mainly include the national standard GB 18487.3, which primarily references ISO 6469.3. This standard is a comprehensive consideration by various countries. Beijing and Shanghai each have their own local standards. According to the promotion requirements, GB 18483.1 specifies a water depth of 10CM, which does not account for extreme conditions during consideration. Local standard requirements: According to the DB31T634-2012 standard, the simulated wading test involves driving in a 15cm deep water pool at a speed of 30±3 km/h for a total wading time of 10 minutes, and driving forward and backward in a 30cm deep water pool at a speed of ≥5 km/h for a total wading time of 10 minutes.
4
0
Share

Can a sedan accommodate 4 adults and 2 children (6 people in total)?

No, it cannot carry six people as it constitutes overloading. Here are the relevant details: 1. Overloading: Refers to when a transportation vehicle's actual load exceeds the maximum permitted limit. Freight overloading typically means the cargo transported by motor vehicles exceeds the vehicle's loading capacity. 2. Penalties for overloading: Any vehicle exceeding 20% of the approved passenger capacity is considered overloaded and will be penalized under new traffic regulations. The new regulations have increased penalty points for serious overloading violations by drivers of key vehicle types: Operating a commercial passenger vehicle exceeding 20% of approved capacity results in 12 penalty points; operating a commercial passenger vehicle exceeding capacity by less than 20%, or operating other passenger vehicles exceeding 20% of approved capacity results in 6 penalty points. Operating passenger vehicles (excluding commercial buses and school buses) exceeding capacity by less than 20% results in 3 penalty points.
11
4
Share

What is the minimum and maximum speed for straight-line driving?

Straight-line driving speed should be between 30 km/h and 40 km/h, meaning it should not be lower than 30 km/h or higher than 40 km/h. Below are some relevant techniques for straight-line driving: Selecting a reference point: When driving straight, the driver should look ahead and pay attention to both sides, choose a reference point, maintain straight-line driving, correct the direction in time, and always be aware of various traffic conditions ahead to detect and handle them promptly. Adjusting the viewing distance ahead in time: Look far and near while holding the steering wheel straight. The driver should adjust the viewing distance ahead according to the speed. At higher speeds, look further ahead; at lower speeds, look appropriately closer, and use peripheral vision to monitor the surroundings. Steering smoothly: Operate the steering wheel by pulling with one hand and pushing with the other, ensuring smooth control. Keep both hands shoulder-width apart and avoid using excessive force.
13
2
Share

How to Set the Toyota RAV4 Lock Beep?

Toyota RAV4 lock beep setting method is as follows: 1. After sitting in the driver's seat, step on the RAV4's brake pedal and put the gear in the P position; 2. After releasing the brake pedal, press the RAV4's one-touch start button twice consecutively. Note that there should be a certain interval between these two button presses to give the vehicle system time to react. 3. After closing all doors, hold down the lock button on the driver's side door for more than 10 seconds. Relevant information is as follows: 1. The lock beep function can confirm whether the motor vehicle is locked, providing a certain safety effect. 2. The lock beep sound of a motor vehicle is used to remind the driver that the vehicle is locked. If the original vehicle is not equipped with this feature, it can be modified later. After modification, the vehicle can have a lock beep sound, which will prompt the driver when locking the vehicle, making it convenient for the driver to know the vehicle's status.
7
4
Share

What brand is GAC Trumpchi?

GAC Trumpchi is the first independently developed model by GAC Group, positioned in the mid-to-high-end market. GAC Trumpchi possesses the capability to compete with joint-venture vehicles in terms of technology, configuration, and quality. As a pioneer among domestic brands, it continues to impact the mid-to-high-end automotive market. Currently, GAC Trumpchi has established sales and service channels in 14 countries. Below are additional details: 1. Introduction: GAC Trumpchi is a wholly-owned subsidiary established by Guangzhou Automobile Group Co., Ltd. It is a high-tech enterprise dedicated to the research and development of complete vehicles, engines, automotive accessories, and automotive engineering technologies. Founded on July 21, 2008, its headquarters is located in Panyu District, Guangzhou. Products include the Trumpchi series of sedans and SUVs. 2. Brand Culture: GAC Trumpchi is GAC Group's first independently developed model, targeting the mid-to-high-end market. Adhering to the brand philosophy of 'Building good cars for loved ones and filling the world with love,' it integrates the resources and experience of GAC Group, insists on independent innovation, and is committed to developing vehicles suitable for Chinese driving habits and road characteristics.
6
1
Share

How to Distinguish Between Four-Wheel Drive and Two-Wheel Drive in Audi A6?

Audi A6 distinguishes between four-wheel drive and two-wheel drive as follows: If the rear emblem has the word 'quattro', it is four-wheel drive. If the rear emblem does not have the word 'quattro', it is two-wheel drive. The Audi A6 is a mid-to-large-sized car under the Audi brand, equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 3.0-liter turbocharged engine. Below are the details about the engines: 1. The low-power version 2.0-liter turbocharged engine has a maximum power of 140kw and a maximum torque of 320 Nm. 2. The high-power version 2.0-liter turbocharged engine has a maximum power of 180kw and a maximum torque of 370 Nm. 3. The 3.0-liter turbocharged engine has a maximum power of 250kw and a maximum torque of 500 Nm.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.