What are the basic steps in gear design?

1 Answers
DelCaden
07/29/25 10:18am
Calculate the driving power based on the load and motion state (speed, whether it is vertical or horizontal motion). Conduct preliminary structural design to determine the total transmission and the number of transmission stages (how many stages of transmission).
Was this review help?
1
4
Share
More Forum Discussions

What transmission does the Lavida Classic use?

Lavida Classic uses an Aisin 6-speed automatic transmission with manual mode. Introduction to transmissions: A transmission consists of a gear transmission mechanism and a control mechanism. It has evolved from manual transmissions in the past to continuously variable transmissions today, allowing the engine to operate with lower fuel consumption while maintaining higher power output. The transmission can change the vehicle's rotational speed and expand the driving wheel's torque and rotation speed. Classification of transmissions: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were primarily 4-speed. AT transmissions achieve automatic shifting through electronically controlled automatic operating systems.
10
4
Share

Can You Replace Just One BMW Headlight?

You can replace just one BMW headlight. Precautions for replacing headlights: Ensure the damaged bulb is fully cooled before replacement to avoid burns. If you are unfamiliar with the replacement process, do not attempt to replace the bulb yourself. Avoid touching the bulb with your fingers, as the heat generated by the bulb can evaporate fingerprints, causing them to condense on the bulb's glass surface, which may blur the bulb's reflector. When to replace headlights: The performance of your headlights affects nighttime illumination and directly relates to driving safety. If you notice dimming or poor performance, it's best to inspect and replace them promptly. Do not wait until they completely fail before repairing, as this may affect normal usage.
7
2
Share

What are the symptoms of a faulty thermostat in the Passat Lingyu 1.8T?

There are generally three symptoms of a faulty car thermostat, as detailed below: Thermostat fails to open: If the thermostat fails to open, the temperature gauge will show the coolant temperature in the high range, but the radiator fan will not turn on. The engine temperature will be high, and it is prone to losing antifreeze. Slow temperature rise: If the car thermostat does not close, the coolant temperature will rise slowly, especially in winter. Even after 10-20 minutes, the temperature may still be in the low range, and the idle speed will be high. Coolant turbulence: After a cold start, if you immediately open the radiator filler cap and the coolant inside is not calm, it indicates the thermostat is malfunctioning. Otherwise, the thermostat is working normally.
12
4
Share

Where is the ACC wire located in a car?

The car ACC wire is located in the car's fuse box. Here are the specific methods to identify the ACC wire: 1. Turn off the power: Open the car's fuse box and turn off the vehicle's power, ensuring the dashboard lights go off. 2. Test with a circuit tester: Locate the yellow fuse inside the fuse box and use the tip of the circuit tester to test the yellow fuse to check if the circuit has power. 3. Light indicates ACC wire: When the vehicle's power is turned on, if the yellow fuse lights up on the circuit tester, it can be confirmed as the ACC wire. Below is additional information about car electrical systems: 1. Power on at ACC position: The ACC wire is the power-on wire, connected to the key-controlled ACC power supply. When the key is in the ACC position, meaning connected to the ACC wire, some of the vehicle's electrical devices, such as the radio and audio system, are powered on, while other components remain off. 2. Power off at LOCK position: When the car is parked and turned off, with the key in the LOCK position, the vehicle's circuit is disconnected, cutting off all power, and the steering wheel lock engages. When the key is in the ON position, all components of the vehicle, including the engine system, are powered on. The START position is for ignition; once the key is turned to the START position, the starter motor is powered on and begins working.
2
4
Share

Which group does XPeng belong to?

XPeng is a brand under Guangzhou Xiaopeng Motors Technology Co., Ltd. Company Background: XPeng was founded in 2014 and is headquartered in Guangzhou. The core team members come from renowned automotive companies such as GAC, Ford, BMW, Tesla, Delphi, Valeo, as well as leading internet and technology enterprises like Alibaba, Tencent, Xiaomi, Samsung, and Huawei. Development History: XPeng was jointly founded by three co-founders in mid-2014. By mid-2015, the team had grown to over 50 members and expanded to 80 by the end of 2015. More than 90% of XPeng's team members are technical professionals.
19
2
Share

What is the fuel tank capacity of the 2008 Camry?

There are 5 models of the 2008 Camry, all with a fuel tank capacity of 70 liters. The vehicles are equipped with 2.0-liter and 2.4-liter naturally aspirated engines, and all models use a 4-speed automatic or 5-speed manual/automatic transmission. All models feature front-engine, front-wheel-drive configuration. Starting from the 2015 model year, the fuel tank capacity of the Camry has decreased. The 2015 and 2016 models have a 65-liter tank, while the 2018, 2019, and 2021 models have a 60-liter tank. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel may exceed the nominal tank capacity. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle is close to E, it indicates low fuel, and when it's near F, it means the tank is nearly full.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.