···
Log in / Register

What are the basic steps for driving a car?

4 Answers
StDavid
07/23/25 11:43pm
Basic steps for driving a car: 1. Press the brake pedal; 2. Press the one-touch start button; 3. The dashboard lights up and the vehicle starts; 4. Place the automatic gear lever in the D position to enter automatic mode; 5. Press the accelerator, and the vehicle will automatically shift gears. To drive a car, you need to start the vehicle's engine. For an automatic transmission, you engage the gear and then accelerate the vehicle by pressing the accelerator pedal, and decelerate or stop the vehicle by pressing the brake pedal. For a manual transmission, you need to press the clutch before starting the engine, then shift into first gear, gradually release the clutch while moving your right foot from the brake pedal to the accelerator pedal, and gently apply some throttle. Coordinate the use of the accelerator and clutch to make the vehicle move forward slowly.
Was this review help?
2
0
Share
VonHarmony
08/10/25 7:25pm
I've been driving for many years, and the basic operations feel quite natural: first adjust the seat and rearview mirror to ensure clear visibility, then fasten the seatbelt, insert the key, and start the engine. For an automatic transmission, press the brake and shift to D, slowly release the brake while gently pressing the accelerator to get moving; for a manual transmission, remember to press the clutch and shift to first gear, gradually releasing the clutch while adding a bit of throttle to avoid stalling. When turning, signal in advance and check the rearview mirror, avoiding sharp turns to maintain smooth driving. When parking, slow down and pull over, press the brake, shift to P, engage the handbrake, and finally turn off the engine. Driving to work every day becomes second nature, listening to the radio to relax, but always staying aware of road conditions. Slow down at intersections for safety.
Was this review help?
10
2
Share
Expand All
SanBrooke
09/23/25 8:02am
When I was learning to drive, I was super nervous and had to follow the steps one by one: first, sit in the driver's seat and adjust the seat and mirrors properly, then fasten the seatbelt to feel a bit more secure. Turn the key to start the engine, press the clutch pedal firmly for a manual transmission car, shift into first gear—if you release the clutch too quickly, the car might jerk forward or stall, so it took several tries to get it steady. When starting, gently press the accelerator and control the steering, frequently checking the rearview mirrors to observe the rear of the car, and avoid panicking while turning the wheel. On the road, accelerate and decelerate smoothly. When parking, slow down in advance, press the brake, shift into neutral, and pull the handbrake. I remember my first time driving, I almost hit a wall—practice makes perfect, and safety always comes first.
Was this review help?
5
1
Share
Expand All
DelMatteo
11/07/25 3:29am
When teaching my daughter to drive, I always emphasize the basics: After getting in the car, I have her adjust the seat height and mirror angles to suit herself, and always fasten the seatbelt. To start the car, turn the key properly—for an automatic, just step on the brake and shift to D; for a manual, coordinate with the clutch. Gently press the accelerator to start, and hold the steering wheel steady without turning it randomly. While driving, pay attention to traffic lights and pedestrians, and frequently check the rearview mirror. Before parking, slow down and move to the right, brake, shift gears, and turn off the engine, ensuring the car is completely stopped before opening the door. Safety is paramount—don’t get distracted, and develop good habits.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What is a Pagani car?

Pagani is a world-renowned supercar manufacturer. More information about Pagani is as follows: 1. Pagani's supercars are famous for their extreme performance and exquisite craftsmanship, with a significant portion being handcrafted: The company was founded by Horacio Pagani and, like the famous Ferrari, was born in Modena, Italy, a town known as the home of supercars. Pagani is renowned for its expensive prices and limited production based on orders. 2. Representative models under Pagani include the Pagani Zonda, officially launched in 1999, and the Pagani Huayra, a second new model series introduced in 2011.
14
5
Share

Is the Volkswagen Lamando equipped with a dry or wet dual-clutch transmission?

Volkswagen Lamando is equipped with a dry dual-clutch transmission. Here are the detailed introductions about Volkswagen Lamando: 1. The difference between dry dual-clutch transmission and wet dual-clutch transmission: The clutch plates of dry dual-clutch transmission are not immersed in transmission oil, while the clutch plates of wet dual-clutch transmission are immersed in transmission oil. 2. Characteristics of Lamando's dry dual-clutch unique technology: (1) Lightweight: The entire transmission of Lamando weighs only about 72 kg, while our AT transmission generally weighs at least 100 kg. (2) Fast shifting speed: The principle of dry dual-clutch is the same as that of manual transmission, both using clamping friction plates for transmission. The dual-clutch has two clutches, one responsible for odd-numbered gears and the other for even-numbered gears. When shifting gears, it is actually switching clutches. (3) Higher transmission efficiency of dry dual-clutch: AT transmission uses hydraulic torque converter transmission, in which the transmission oil will lose part of the power; dual-clutch uses friction transmission, which is direct and fast, as long as the clutch does not slip, it can achieve more than 90% transmission efficiency.
20
1
Share

How to Remove the Fit's Trunk Door?

To remove the trunk door of a Fit, first open the car trunk and take off the interior trim panel. Below is a detailed introduction about the Fit's trunk door: 1. Use tools to remove the clips and screws inside the trunk: Professional tools are required for the removal of the trunk door, and it is recommended to have it done at a professional auto repair shop. 2. The elastic net in the car trunk can be used to secure fragile items: Every car trunk is equipped with an elastic net. If there are fewer items in the trunk, fragile items may roll around, and at this time, the elastic net can be used to secure them. 3. The trunk partition can create a relatively hidden space in the trunk: The space created by the trunk partition is very practical, making it more convenient to handle work and other matters.
11
2
Share

How many cylinders does the Baojun 510 engine have?

LAR is the engine model used in the Baojun 510, with a maximum horsepower of 99 hp, a maximum power of 73 KW, a maximum power speed of 5800 rpm, and a peak torque of 135 N.m. The engine of the Baojun 510 is domestically produced. The Baojun 510 is a compact SUV under the Baojun brand. For daily maintenance of the Baojun 510 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
12
5
Share

What car has a logo of K?

The car with a logo of K is the Knight XV. Here are some detailed introductions about the Knight XV: 1. The Knight XV is an ultra-luxury armored off-road vehicle manufactured by a Canadian automotive company in Toronto. It belongs to an extremely niche brand: the Knight XV draws inspiration from heavy military armored vehicles as an SUV. Additionally, the Knight XV can run not only on gasoline or diesel fuel but also on biofuels. 2. The interior of the Knight XV is luxurious, even the entertainment facilities are comprehensive: equipped with a 27-inch LCD TV, a PS3 game console, a wet bar, an icebox, and a cigar box, all reflecting luxury. The cashmere carpets and electric leather executive chairs in the car exude an air of opulence. 3. The Knight XV adopts a body-on-frame structure, uses a four-wheel-drive system, and is paired with a 5-speed automatic transmission: ensuring the Knight XV's off-road capability under complex road conditions.
12
5
Share

Is the U-turn gap affected by red lights?

If the gap is marked with dashed lines, the U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. You can make a U-turn directly as long as it does not interfere with other normally moving vehicles and ensures your own safety. If the gap is marked with solid lines, then the U-turn must cross the pedestrian crossing and is subject to traffic signals. If you need to cross the pedestrian crossing to make a U-turn, you must yield to pedestrians: Pedestrians walking on the right side of the road's crosswalk who have not reached the centerline of the road. Vehicles on the left side of the road should slow down and proceed with caution, ensuring safety before passing the crosswalk. Pedestrians waiting outside the boundary line between motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed with caution, ensuring safety before passing the crosswalk. If pedestrians cross the dividing line between motorized and non-motorized lanes, vehicles that do not stop and yield are committing a traffic violation and should be penalized. After pedestrians enter the motorized lane via the crosswalk, vehicles should slow down and proceed with caution, ensuring safety before passing the crosswalk. If vehicles do not stop and yield, it is a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. If vehicles do not stop and yield, it is a violation and should be penalized. Pedestrians crossing the centerline of the road and entering the motorized lane. If vehicles do not stop and yield, it is a violation and should be penalized. If the road is divided by a green belt, pedestrians waiting in the middle of the road must be yielded to. Vehicles should slow down and proceed with caution, ensuring safety before passing the crosswalk. Scenarios where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn is permitted. If there is a U-turn traffic light, follow its instructions. If there is no traffic light, make the U-turn based on the specific situation, ensuring it does not interfere with other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: If there is no explicit prohibition against U-turns, they are allowed. 'No explicit prohibition' means there are no 'no-U-turn' or 'no-left-turn' signs, and the centerline is not solid. In such cases, U-turns are permitted. U-turns are also allowed on yellow grid lines: Yellow grid lines indicate no-parking zones, typically placed at intersections prone to congestion due to temporary parking, important facility entrances, or other necessary locations. Parking on these lines (including waiting for traffic lights) is a violation. However, while parking is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. If 'no-left-turn' and 'U-turn allowed' signs appear together: U-turns are permitted, but left turns are prohibited. Note that 'no U-turn' is not the same as 'no left turn.' Things to note when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable location for a U-turn. If there is a 'no-left-turn' sign ahead, even if there is no explicit 'no-U-turn' sign, U-turns are not allowed at that intersection because U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to straight-moving vehicles before making a U-turn. If you interfere with their normal movement, you will bear full responsibility for any accidents. Near the intersection stop line, lanes usually have guiding arrows. The leftmost lane does not always have a left-turn arrow. If it has a straight arrow, U-turns are prohibited even if there are no explicit 'no-U-turn' signs.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.