What are the basic knowledge of car operation?

1 Answers
McBrooklyn
07/29/25 6:02pm
Car operation basic knowledge is as follows: 1. Steering: (1) The three main components controlled by hands: steering wheel, turn signal, and gear shift. (2) The turn signal is located in the middle-left position of the steering wheel. First turn on the turn signal, then turn the steering wheel. The direction in which the steering wheel is about to turn is the same direction in which the turn signal should be activated. 2. Foot-controlled components: clutch, brake, and accelerator: (1) The left foot controls the clutch; the right foot controls the brake and accelerator. (2) Braking should be gradual, using inertia braking. (3) The key action is not to press the brake all the way down, but to control the extent of braking based on the road conditions ahead (practice is needed to master the technique). (4) The accelerator is used for speeding up, and its use should also be gradual, not pressing it all the way down. When the accelerator is pressed, the speed will increase, and then subsequent gear shifting operations are required.
Was this review help?
15
3
Share
More Forum Discussions

Can the plastic cover of the driver's license be replaced?

The plastic cover of the driver's license can be replaced, as the outer shell is not a component of the driver's license itself. The driver's license consists of the "People's Republic of China Motor Vehicle Driving License" and the "People's Republic of China Motor Vehicle Driving License Supplementary Page". Below is an introduction to the motor vehicle driver's license: 1. Definition of a motor vehicle driver's license: It refers to a legal document issued by the administrative authorities to individuals who have legally been permitted to learn to drive a motor vehicle, have mastered traffic regulations and driving skills through training, and have passed the official examinations, granting them permission to drive a specific type of motor vehicle. 2. Examination subjects for the motor vehicle driver's license: These include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving), totaling three subjects.
10
5
Share

Why does the Audi engine still make noise after turning off?

Because its cooling system will still automatically start to cool down the engine system, so there will still be noise. The following is the relevant introduction: 1. Audi: A German luxury car brand, its logo is four interlocking rings. It is now a subsidiary of Volkswagen Group. On December 20, 2018, the 2018 World's 500 Most Influential Brands list was released, and Audi ranked 51st. In October 2019, Interbrand released the Global Top 100 Brands list, ranking Audi 42nd. 2. Engine: An engine (Engine) is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Internal combustion engines usually convert chemical energy into mechanical energy.
9
4
Share

How to Remove the Spare Tire of Geely Vision?

The method to remove the spare tire of Geely Vision is: The spare tire is located under the trunk cover panel. Open the trunk cover panel and then take it out. It is necessary to regularly inspect the spare tire, mainly checking the tire pressure, wear, and cracks. Before the tread wears to the wear indicator line, the tire should be replaced as soon as possible. Taking the 2020 1.5L Manual Value Edition Vision as an example, its body dimensions are 4599mm in length, 1747mm in width, and 1482mm in height, with a wheelbase of 2615mm. It is equipped with a 1.5L naturally aspirated engine, matched with a 5-speed manual transmission, and the body structure is a 4-door, 5-seater sedan.
9
2
Share

What to Do When the Charcoal Canister is Clogged?

There are several solutions for a clogged charcoal canister: 1. When a clogged charcoal canister is detected, it is essential to clean or replace it promptly to avoid affecting vehicle performance. 2. After driving the car for a certain distance, stop the vehicle while keeping the engine running, then manually open the fuel filler cap. If a suction sound is heard, it indicates a clogged charcoal canister. 3. When the charcoal canister is clogged, the car may emit a noticeable gasoline odor. If the car has been parked outdoors for an extended period, opening the fuel tank cap may result in a large amount of gas escaping, indicating a clogged charcoal canister. When the charcoal canister is clogged, the passage to the fuel tank is blocked, causing the fuel tank to bulge, which can easily affect the engine's normal operation.
8
0
Share

Should the Transmission Fluid Be Changed?

Transmission fluid should be changed every 3 to 4 years or when the mileage reaches 60,000 to 80,000 kilometers. The functions of transmission fluid are: 1. Keeping the shifting system clean; 2. Lubricating the transmission components. Signs that indicate the need for a transmission fluid change include: 1. Vehicle shaking and rough shifting; 2. Transmission overheating warning on the dashboard; 3. Engine stalling; 4. Unusual noises. The functions of a car's transmission are: 1. Changing the gear ratio; 2. Expanding the torque and speed of the driving wheels; 3. Enabling the car to reverse; 4. Facilitating gear shifting or power output. Maintenance methods for a car's transmission include: 1. Regularly checking the fluid level; 2. Avoiding skipping gears when upshifting; 3. Not forcing the transmission into neutral; 4. Not shortening the warm-up idling time; 5. Avoiding gear grinding when shifting.
19
0
Share

How to Turn on the Heater in a Sail?

The method to turn on the heater in a Sail is as follows: 1. After starting the car, wait for 5 to 10 minutes until the water temperature rises to the normal operating temperature, then you can turn on the heater; 2. Adjust the air conditioning circulation mode to internal circulation; 3. Switch to the heater mode, which is indicated by the red zone; 4. Adjust the air conditioning to a suitable level and set the direction of the air vents. The body dimensions of the Sail are: length 4684mm, width 1807mm, height 1628mm, wheelbase 2796mm, minimum ground clearance 178mm, and fuel tank capacity 45l. The Sail features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.3t inline 3-cylinder turbocharged engine, delivering a maximum horsepower of 163ps, maximum power of 120kw, and maximum torque of 230nm, paired with a 6-speed automatic transmission.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.