What Are the Basic Knowledge for Beginners in Motorcycles?

2 Answers
LaHeidi
07/28/25 10:51pm
Beginners in motorcycles need to understand aspects such as model selection, brand choice, parameter selection, and more. Model selection: Understand your own needs. Choose the model flexibly based on usage scenarios. Brand selection: Brands are divided into domestic and imported types. Choose the appropriate brand based on budget, considering cost-effectiveness. Parameter selection: Refer to engine parameters (emission standards, cooling method, maximum power, maximum torque, etc.), body specifications (wheelbase, frame, braking type, curb weight, suspension type, tire specifications), fuel tank size, etc. Riding posture: Maintain body balance, keep the posture upright, and change body posture flexibly as needed. For example, when turning, adjust your posture with the tilt of the bike to achieve unity between rider and bike. During normal riding, sit on the bike with your spine slightly arched, hips not too far back or forward, hands lightly holding the handlebars, elbows slightly bent, chin tucked in, and eyes looking forward.
Was this review help?
18
4
Share
VonKennedy
08/12/25 3:18am
When I first started riding motorcycles, I was a complete newbie. After ten years of riding, I now understand the core essentials for beginners. First, safety gear is non-negotiable—a full-face helmet is a must, as it prevents 70% of accident injuries, and knee and elbow guards shouldn’t be skipped. Second, practice basic maneuvers in open areas: start the engine by pulling the clutch and pressing the brake, shift gears smoothly, and practice low-speed turns for balance. Third, learn traffic rules and signals—don’t assume motorcycles’ agility means you can ignore regulations. Fourth, start with simple maintenance: check tire pressure weekly (1.8-2.2 bar range), change the oil every 3,000 km, and lubricate the chain to prevent rust. Fifth, don’t overlook mental preparation—beginners tend to panic. Take a riding course to learn emergency braking, and start with a 250cc beginner-friendly bike like the Honda CB series—affordable and easy to handle. Take it slow; falls are part of the learning process, but with proper protection, the risks are much lower.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

Is It Harmful to Always Drive in S Mode?

Always driving in S mode is harmful to the car. The S mode only delays upshifting without changing other operational aspects, which inevitably increases the transmission load in the short term and accelerates tire wear. Here is a detailed introduction about car gears: 1. Speed range: First gear corresponds to a speed of 0-5 km/h. Second gear corresponds to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. 2. Gear shifting timing: For most cars, the optimal shifting point is when the engine reaches 2000 r/min, and it should not exceed 2500 r/min. For some high-displacement, high-power engines, shifting can be done around 3000 r/min.
13
0
Share

What is the amperage of the dash cam fuse?

The rated current of a dash cam is 0.8-1A. Generally, a 1.5-2A fuse is sufficient. The function of the fuse is to protect the circuit (wiring) and electrical equipment. When the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. The following are the installation steps for the dash cam fuse: 1. Open the fuse box cover; 2. Firmly pull the upper left and right corners of the fuse box; 3. The circled one is the cigarette lighter fuse, pull it out; 4. Insert the cigarette lighter fuse below and the dash cam fuse above; 5. Pry slightly at the circled area to open the side panel; 6. Pass the wire through the marked line; 7. The ground wire screw, a hexagon socket screw, can be installed successfully.
10
3
Share

What is the temperature inside a car trunk in summer?

In summer, when the temperature exceeds 30 degrees Celsius, the temperature inside a car trunk generally ranges between 50-55°C. Here is some relevant information about car trunks: 1. Maintenance: Keep the trunk clean and properly use the mesh pockets on both sides. Most cars come equipped with these pockets to store items that may roll around, such as flashlights or small fire extinguishers. They don't take up much space, but it's not advisable to pile items together, as they may fall out of the pockets due to bumps during driving. 2. Precautions: Flammable and explosive items are prohibited. The interior of a car is a relatively enclosed space, and after being exposed to the sun in summer, the temperature inside can become very high. Storing flammable or explosive items in the trunk may lead to spontaneous combustion or explosion due to the high temperatures.
18
3
Share

Is it normal to rev in neutral but not in gear?

Revving in neutral is normal while revving in gear is not, here are the specific details: 1. Reason: When revving in neutral, the vehicle load is very small, whereas revving in gear puts a large load on the vehicle, causing severe exhaust pipe resonance. 2. Revving in neutral: Although the gear is in neutral, the engine's power keeps the transmission input shaft rotating through the clutch. When you rev in this state, except for the output shaft and the synchronizers of each gear not rotating, components like the input shaft, countershaft (also known as primary and secondary shafts, though transmission structures may vary), and the constant-mesh gears on the shafts will change speed according to the engine RPM. Revving in neutral or coasting in neutral over long distances can damage the transmission, potentially leading to wear, burning, or noise in the input shaft bearings, synchronizer gears, and synchronizers.
13
2
Share

Windshield Replacement: OEM or Fuyao?

Both OEM and Fuyao glass are viable options for windshield replacement. Below are the detailed introductions: 1. Introduction: Windshields originated in the 1920s when Ford had an innovative idea to sandwich two layers of glass with a PVC plastic interlayer, creating a laminated glass structure similar to a sandwich. This technology is still in use today. 2. Fuyao Glass: Established in 1987 in Fuzhou, Fuyao is China's largest automotive glass supplier, renowned for its scale, advanced technology, and significant export volume. Today, the Fuyao Group has become the world's largest professional automotive glass supplier. Its products have been certified and adopted by top global automotive manufacturers and major car brands, including Bentley, Mercedes-Benz, BMW, Audi, General Motors, Toyota, Volkswagen, Ford, and Chrysler, providing them with global OEM services and comprehensive automotive glass solutions.
19
2
Share

Can dent repair be performed when a car has a car cover?

Dent repair can be performed when a car has a car cover. Below is detailed information about automotive dent repair: 1. Overview: Automotive dent repair involves restoring the dented areas of a car's paint surface to their original condition. Generally, sharp-angle and obtuse-angle dents can be fully restored. Dents without paint damage can be repaired to their original state, hail dents can be repaired, while edges and AB pillars are more difficult to repair. 2. Additional Information: Automotive dent repair is based on optical, physical, and mechanical principles, using leverage to repair dents of various sizes and depths caused by external factors. The prerequisite is that the car's paint surface is undamaged and the metal surface hasn't been overly stretched. It is a modern repair technique.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.