What are the auxiliary configurations of the Mercedes-Benz S-Class?

1 Answers
Julie
07/25/25 2:23pm
The auxiliary configurations of the Mercedes-Benz S-Class include: front and rear parking radar, reverse camera, cruise control, driving mode switching, automatic parking, engine start-stop technology, auto hold, hill start assist, suspension soft/hard adjustment, suspension height adjustment, air suspension, and variable steering ratio. In high-end models, additional auxiliary configurations such as a 360-degree panoramic camera and full-speed adaptive cruise system are available. The Mercedes-Benz S-Class is a top-tier luxury vehicle under the Mercedes-Benz brand. The dimensions of this car are 5259 mm in length, 1899 mm in width, and 1494 mm in height, with a wheelbase of 3165 mm. In terms of power, this vehicle is equipped with four types of engines: a 2.0-liter turbocharged engine, a low-power version 3.0-liter turbocharged engine, a medium-power version 3.0-liter turbocharged engine, and a high-power version 3.0-liter turbocharged engine.
Was this review help?
17
4
Share
More Forum Discussions

What is the difference between 28t and 2.0t?

The displacement of 28t in a car refers to a 2.0T engine. Therefore, there is no difference between 28t and 2.0t. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work. The types of engines are as follows: 1. By usage: According to the fuel used, engines can be divided into gasoline engines and diesel engines; 2. By stroke: According to the stroke, engines can be divided into four-stroke internal combustion engines and two-stroke internal combustion engines; 3. By cooling method: According to the cooling method, engines can be divided into water-cooled engines and air-cooled engines; 4. By cylinder: According to the cylinder, engines can be divided into single-cylinder engines and double-cylinder engines; 5. By intake system: According to the intake system, engines can be divided into naturally aspirated engines, turbocharged engines, and mechanically supercharged engines.
8
3
Share

What is the working principle of engine braking?

Simply put, it means the engine stops injecting fuel and sparking, but the pistons inside the engine continue to move, constantly compressing air without ignition. At this point, the energy for compressing the air comes from the vehicle's own kinetic energy, gradually reducing the vehicle's speed, effectively turning the engine into an air compressor. The main principles are as follows: 1. Engine Braking: Engine braking refers to the process where, after releasing the throttle, the exhaust valve opens instantaneously near the top dead center during the compression stroke, releasing the high-pressure gas; 2. Cylinder State: After closing the exhaust valve, there is very little gas left in the cylinder. During the expansion (power) stroke, when the piston moves from the top dead center downward, the cylinder is in a negative pressure state; 3. Effect Generation: The gas resists the downward movement of the piston (the piston acts like a vacuum pump), creating a torque in the opposite direction to the crankshaft, thereby generating a braking effect.
17
3
Share

What Causes the Car Not to Move When in Gear?

Car not moving when in gear could be due to several reasons, such as leakage in the automatic transmission oil pan leading to loss of hydraulic fluid, loosening or detachment of the linkage or cable between the control lever and the manual valve rocker arm, the manual valve remaining in neutral or park position, clogging of the oil pump inlet filter screen, severe leakage in the main oil circuit, or damage to the oil pump. The following are the solutions: 1. Check for hydraulic fluid in the automatic transmission: Inspect the oil pan, hydraulic oil cooler, and oil pipes for any damage causing leakage. If severe leakage is found, repair and refill the hydraulic fluid. 2. Inspect the automatic transmission: Check the linkage or cable between the control lever and the manual valve rocker arm for any looseness or detachment. Tighten immediately if found loose. 3. Remove the plug from the main oil circuit pressure test port: Start the engine, shift the control lever to drive or reverse, and check if hydraulic fluid flows out from the test port. If fluid is observed, replace the engine promptly.
19
0
Share

How to use the automatic parking in Leiling?

To use the automatic parking in Leiling, after getting into the car, turn on the automatic parking function, shift to D gear, and then release the foot from the brake pedal. Below is an introduction to the Leiling: 1. Introduction: The Leiling is a compact sedan based on Toyota's MC platform, specifically tailored for Chinese consumers. It made its debut on April 18, 2014, and was officially launched in the summer of 2014. 2. Powertrain: The new car offers a total of 10 models equipped with either a 1.2T turbocharged engine or a 1.8L hybrid system. 3. Features: The Leiling is built from the Toyota A-class car's American version model. With its sharp appearance and excellent quality, the American version has been a best-seller in North America for many years, consistently topping the sales charts in the A-class car market. The Leiling inherits the championship genes of this model, boasting a high-quality foundation.
19
0
Share

Are Bestune and Hongqi the same brand?

Bestune and Hongqi are not the same brand; they are two separate brands under FAW. Taking the Hongqi H5 as an example, here are the specific details about the Hongqi H5: 1. Vehicle Type: The Hongqi H5 is a sedan. It has a wheelbase of 2875 mm, with length, width, and height dimensions of 4945 mm, 1845 mm, and 1470 mm, respectively. 2. Powertrain: The entire lineup is equipped with a 1.8-liter turbocharged engine, coded CA4GC18TD-11. This 1.8-liter turbocharged engine delivers 180 horsepower and a maximum torque of 250 Nm. It features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. The engine is paired with a 6-speed automatic transmission from Aisin. 3. Suspension: The Hongqi H5 features a MacPherson strut front suspension and a multi-link independent rear suspension.
12
0
Share

What is the difference between Alcantara and suede?

Alcantara and suede are somewhat similar, but the former is a composite fiber that is easy to clean, while the latter is the reverse side of cowhide (hence also called "reverse leather"). Alcantara was invented in 1970 by Dr. Miyoshi Okamoto of Toray Industries, Inc. in Japan, and its composition is 68% polyester and 32% polyurethane. It is not genuine leather, but it is relatively expensive. Here is some relevant information about Alcantara: 1. Alcantara has excellent hand feel, high friction coefficient, great softness, rich color, strong durability/wear resistance, and is extremely easy to maintain. 2. Alcantara uses a series of unique and advanced processing techniques, making it a high-end and innovative new material. This process has yet to be successfully replicated by anyone, so this material is exclusive to Alcantara. Since 2009, Alcantara® has been certified as a carbon-neutral material and has been identified as having active ingredients that can reduce and offset CO2 emissions. 3. Alcantara has excellent plasticity and can be made into steering wheels. The sides of the Huracan's steering wheel are wrapped in Alcantara material to improve hand feel and increase friction.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.