···
Log in / Register

What are the automatic transmission operation tips for the Geely Emgrand?

4 Answers
DiDallas
09/05/2025, 11:44 PM

Geely Emgrand automatic transmission driving tips: 1. Starting precautions: Before starting an automatic transmission vehicle, ensure the gear lever is in P or N position. Pay attention to coordinating the brake, handbrake, and accelerator properly when starting. 2. Post-starting precautions: After shifting to D gear, slowly release the handbrake while gently lifting the brake pedal (equivalent to slowly releasing the clutch in a manual transmission vehicle), then lightly press the accelerator to allow the vehicle to start gradually. Avoid stomping on the accelerator, as it not only wastes fuel but also damages the vehicle. Note: Do not release the brake pedal when shifting gears. 3. Highway driving precautions: Automatic transmission vehicles must maintain proper acceleration on highways. However, this differs in urban areas. Regardless of speed, most of the time requires timely deceleration. 4. Urban driving precautions: To save fuel, reduce maintenance costs, and improve driving comfort, automatic transmission vehicles should decelerate promptly when spotting a red light from afar or encountering traffic congestion ahead.

Was this review help?
12
3
Share
Marissa
09/17/2025, 11:44 PM

I have been driving a Geely Emgrand automatic transmission for over three years, and experience has taught me that operating techniques are crucial. When starting, press the brake and shift the gear to P or N before ignition; after starting, shift to D for smooth forward movement, and R for reversing. While driving, I try to press the accelerator gently for smooth acceleration, which reduces wear on the transmission; when going uphill or fully loaded, I use the manual low-gear mode to increase power output and prevent rolling back. When parking, remember to shift to N first, engage the handbrake, and then shift to P before turning off the engine to protect the transmission's lifespan. I also recommend regularly checking the transmission fluid to avoid leaks or overheating issues. Using cruise control on highways saves effort and fuel, while in city traffic, anticipate signals and start smoothly. In winter, let the engine idle to warm up before driving to ensure overall safe and smooth operation. These daily habits make driving more enjoyable and fuel-efficient.

Was this review help?
11
4
Share
Expand All
DeLouis
11/01/2025, 12:09 AM

As a young Emgrand automatic transmission owner, I prioritize simple and efficient operation. Key techniques include shifting to D gear immediately after starting for direct forward movement, using R gear for reversing with the front foot on the brake to ensure smoothness; avoiding flooring the accelerator for sudden acceleration, as gentle throttle application during starts and deceleration helps reduce fuel consumption. On downhill slopes, releasing the throttle to utilize engine braking minimizes brake wear. When parked at traffic lights, shifting to N gear provides a convenient pause; on uphill slopes, switching to manual low gear enhances traction. I've also found that regular tire pressure checks, maintaining around 2.3bar, optimize driving efficiency; preemptive deceleration in congested areas ensures smooth transitions. Keeping the Eco mode on intelligently controls shift frequency; after each drive, ensuring the gear returns to P protects the system. These small practices add up to significant savings and a more secure driving experience.

Was this review help?
7
3
Share
Expand All
VanJordan
12/14/2025, 11:25 PM

From the perspective of an automotive enthusiast, I'd like to share the driving pleasure of the Emgrand automatic transmission. When starting, firmly press the brake and shift to P mode for ignition; During driving, frequently use manual mode for gear shifting to enhance control, such as downshifting before corners and exiting with higher RPM for stronger acceleration. Avoid prolonged idling to protect transmission lifespan; Start gently with light throttle for smoothness. Switch to manual low gear for extra power on steep climbs; Utilize automatic brake assist for safety during descents. Warm up the vehicle until coolant reaches normal temperature before full-speed driving; Regularly change transmission fluid to maintain performance. Maintain constant speed during highway cruising to reduce shift frequency; Predict traffic flow and use D mode's intelligent adjustment in congested areas.

Was this review help?
3
0
Share
Expand All
More Forum Discussions

What does the TC indicator on the dashboard mean?

When the dashboard displays TC, it indicates that the vehicle's Traction Control System is turned off. Here is an introduction to the Traction Control System: 1. The Traction Control System has a dedicated control button, usually located on the car's center console. It is possible that the owner accidentally pressed the button, and pressing it again will restore the system. 2. The function of the Traction Control System is to improve the tire's traction. When the car's tires start to slip, the Traction Control System sends a signal to the vehicle's computer, which then applies braking to the slipping wheel to prevent accidents. The Traction Control System not only enhances the vehicle's stability but also improves its traction. 3. The Traction Control System effectively protects the driver's safety. During driving, especially in rainy or snowy conditions, it can effectively prevent the car from slipping, adding an extra layer of safety. Although the car is equipped with this function, it is still important to drive cautiously and safely.
12
1
Share

What to Do When the Steering Wheel Is Locked and the Key Won't Start the Car?

Simply turn the steering wheel while twisting the key to ignite the engine. The steering wheel lock is a basic anti-theft feature designed for vehicle security. When the car is turned off, if the steering wheel is turned left or right or the wheels are not aligned properly, any applied force can cause the steering wheel to rotate, triggering the self-locking function. This results in the steering lock pin engaging with the steering column. Below are the reasons for the car's automatic lock: 1. Reason for automatic lock: The car's automatic lock is activated when the steering wheel is turned while removing the key after the last engine shutdown. 2. Purpose of the lock: The vehicle's security anti-theft system perceives a theft risk, prompting it to lock the steering system to prevent vehicle theft.
12
2
Share

What is the difference between a 1.2T and a 1.5L car engine?

1.2T refers to a turbocharged engine with a displacement of 1.2 liters, while 1.5L represents a naturally aspirated engine with a displacement of 1.5 liters. Here, T stands for turbocharged engine, and L denotes a naturally aspirated engine. The differences between a 1.2T and a 1.5L car engine are as follows: Different engines: The 1.5L is a naturally aspirated engine. Turbocharging is an advanced technology that makes the engine more fuel-efficient, environmentally friendly, and powerful compared to naturally aspirated engines. The 1.2T is a turbocharged, direct-injection engine. Turbocharging is an advanced technology that provides better fuel efficiency, environmental benefits, and stronger performance than naturally aspirated engines. Different fuel consumption and maintenance costs: Taking A-segment cars as an example, the 1.2T Corolla and the 1.5L Mazda3 both have a fuel consumption of slightly over 7L per 100 km. In terms of maintenance costs, there is not much difference between three-cylinder and standard four-cylinder engines. The main difference lies in the spark plugs—three-cylinder engines have one fewer than four-cylinder engines, making them significantly cheaper. The replacement cycles for other parts are basically the same for both three-cylinder and four-cylinder engines. Different horsepower: The 1.2T engine can provide around 100 horsepower, which is equivalent to the output of a naturally aspirated 1.6-1.8L engine. Additionally, the 1.2T is a turbocharged, direct-injection engine, while the 1.5L is a naturally aspirated engine. Turbocharging is an advanced technology that offers better fuel efficiency, environmental benefits, and stronger performance compared to naturally aspirated engines.
8
1
Share

What Causes the Battery Light to Illuminate?

A yellow light indicates insufficient battery power or complete discharge, while a red light signals a malfunction in the power supply system. Below is a detailed explanation of the reasons for the battery light illumination: 1. If the generator's output voltage is lower than the battery voltage, the generator is not functioning, or there is a fault in the power supply circuit, the car battery light will illuminate. In such cases, it is advisable to visit a repair shop to inspect the generator and charging circuit. 2. The battery light on the dashboard is a warning light indicating that the generator is not producing electricity. Normally, this light turns on when the ignition switch is set to the ON position and turns off after the engine starts. If the light remains on after starting the engine, it may indicate that the generator is not producing electricity or there could be an issue with the wiring, necessitating a visit to a service station for inspection. 3. Insufficient battery power can also cause the battery indicator light to illuminate. In this scenario, the vehicle can still be used because the battery can recharge via the internal generator while the car is in motion.
7
1
Share

What Causes a Heavy Gas Pedal?

Introduction to the causes of a heavy gas pedal: 1. It may be related to fuel quality, with a clogged fuel filter. 2. Check if the spark plugs are faulty. 3. A damaged sensor in the transmission locks the overdrive gear. 4. Issues with the engine's oil circuit, requiring cleaning of the oil circuit. Excessive carbon buildup in the vehicle's engine often manifests as a heavy gas pedal and slow acceleration when overtaking. Common areas prone to carbon buildup include the throttle body, combustion chamber, spark plugs, and fuel lines. Here are methods to address car carbon buildup: 1. Add fuel additives when refueling; 2. Disassemble and clean the engine; 3. Perform a fuel system cleaning with a drip method.
11
5
Share

Will long-term non-use of highways affect ETC functionality?

Long-term non-use of highways has minimal impact on ETC devices. Here are relevant details: 1. ETC Overview: The Chinese term translates to Electronic Toll Collection, which enables automatic tolling on highways or bridges. It utilizes dedicated short-range communication between the onboard unit installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, coupled with computer network technology for backend bank settlement processing. This allows vehicles to pay highway or bridge tolls without stopping. 2. Current ETC Development Status: ETC represents an internationally promoted electronic automatic toll collection system for roads, bridges, and tunnels. Traditional manual toll collection methods using IC cards or magnetic cards as media in highway networks are inevitably influenced by this technological trend.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.