···
Log in / Register

What are the automatic transmission gears of the Baojun 530?

1 Answers
StGianna
07/25/25 2:44am
The gear shift of the Baojun 530 is located in the middle of the cabin. The "P" gear is used for parking, and the handbrake should be engaged for long-term parking; The "R" gear is the reverse gear, and the rear road conditions should be observed when reversing; The "N" gear is the neutral gear, used for parking or towing; To the left of the "D" position is the automatic forward gear, and to the right is the manual gear shift with plus and minus; The "S" gear is the sport mode gear. The maximum speed of the Baojun 530 is 180km/h, and the daily highway speed is 90~120km/h. Below is the relevant introduction of the Baojun 530: 1. Appearance: The Baojun 530 has a length/width/height of 4695×1835×1750mm and a wheelbase of 2750mm, with an overall design that continues the tough and majestic style. The new car adopts a brand-new dot-matrix starry grille, and the coherent LED "Future Eye" daytime running lights appear agile and futuristic. 2. Interior: The interior is mainly black, with the dashboard adopting an asymmetric design tilted towards the driver's side. The all-black soft-wrapped dashboard enhances the interior quality of the car. The new car is equipped with a 10.4-inch high-definition vertical LCD screen with clear and delicate display effects, which is the largest dashboard screen in its class, providing a good visual experience. 3. Power: It is equipped with a 1.5T turbocharged engine, with a maximum power of 108kW/5200rpm and a maximum torque of 250N·m/2200-3400rpm, equivalent to the power output of a mainstream 2.4L naturally aspirated engine on the market, meeting the National VI emission standards.
Was this review help?
17
1
Share
More Forum Discussions

Why is the music volume very low when playing via car Bluetooth?

Low volume after connecting to the car is a common issue. First, check whether the call audio volume on your phone is turned on. If not, the sound will naturally be quiet. Possible reasons for low volume: Compatibility: If the volume is turned on, the issue might be Bluetooth incompatibility. Each car's Bluetooth device is different, and if the phone and car's Bluetooth systems are incompatible, it can affect sound transmission. Interference: Since the car is constantly moving and the location keeps changing, along with the prolonged high-frequency connection between the car and phone, it is prone to interference from other signals, leading to unstable Bluetooth connections. In this case, turn off Bluetooth, wait a moment, and reconnect. Lag: Over time, phones accumulate more operational junk, which can eventually cause Bluetooth lag. In such cases, unpair the Bluetooth, restart the phone, and then re-pair. Damage: Bluetooth device damage is also possible, including issues like microphone blockage, transmitter failure, electronic component leakage, or audio damage. A detailed inspection may be required. On phones, media audio and call audio are set separately. If the music volume is low after connecting via Bluetooth, it might be because the media audio volume on the phone is set too low. Additionally, the volume on the car's navigation system or head unit might be set too low. If adjusting the volume doesn’t help, try disconnecting and reconnecting Bluetooth.
5
0
Share

What documents are required for the six-year vehicle inspection?

Six-year vehicle inspection requires the following documents: 1. Fill out an Application Form for Vehicle Inspection Label (if the vehicle owner is not handling the procedure in person, information of the agent must also be provided). 2. Vehicle registration certificate, owner's ID card, and compulsory traffic insurance policy. If the owner is not present, the agent must bring their own ID card, the vehicle registration certificate, and the compulsory traffic insurance policy. 3. Before applying for the annual inspection label, ensure there are no outstanding traffic violations on the vehicle. If the system shows unresolved violations, the inspection label cannot be issued. 4. Vehicle Safety Technical Inspection Certificate. The vehicle management office should confirm the vehicle, review the submitted documents, and issue the inspection label within one day of receiving the application.
17
4
Share

How Many Kilometers Should a Truck Be Serviced?

Trucks are generally serviced every 5,000 kilometers. Below are other details: 1. Engine oil should be changed every 5,000 kilometers: After 5,000 kilometers, the engine oil is nearing its usage limit, with reduced lubrication and viscosity. 2. At around 14,000 kilometers: Perform a major service, which includes changing the engine oil, inspecting the steering system, replacing brake pads, and changing the three filters (air, oil, and fuel). Things to note during maintenance: 1. Always replace the oil filter when changing the engine oil: Skipping the oil filter to save money will significantly reduce the performance and effectiveness of the oil. 2. Consumable parts should be replaced on time: Brake pads, wiper blades, tires, belts, batteries, brake fluid, etc. 3. Regularly inspect all electrical and fuel systems.
12
2
Share

What is the earliest number of days to obtain a driver's license?

Taking the C1 driver's license test as an example: From completing Subject 1 to the earliest scheduled Subject 3 test is 30 days. From the end of the test to the issuance of the driver's license is 2 days. Therefore, the minimum time from completing Subject 1 to obtaining the driver's license is 32 days. Each student's theoretical training time must not exceed 4 hours per day, and practical training time must not exceed 4 hours per day. Below is a related introduction to the subject test content: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test (Subject 1) is a written test, computer-based, with a full score of 100, and a passing score of 90 or above (including 90). 2. Subject 2: Field driving skill test (Subject 2) is conducted on-site with actual vehicles. It only has pass or fail results. The five mandatory items tested in sequence are reverse parking, parallel parking, S-curve, right-angle turn, and hill start and stop. The full score is 100, and a passing score is 80 or above (including 80). 3. Subject 3: Road driving skill test (Subject 3) is conducted on highways or simulated sites with actual vehicles. The full score is 100, with passing scores of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safe and civilized driving-related knowledge test (Subject 4) is a written test with a full score of 100, and a passing score of 90 or above (including 90).
7
4
Share

What Causes No Pressure in the Low Side of a Car's Air Conditioning System?

Generally, it is a fault with the air conditioning compressor, where there is internal leakage within the compressor. Replacing the compressor in a timely manner can resolve the issue. Below is more extended information about car air conditioning systems: 1. Components: A car's air conditioning system typically consists mainly of the compressor, an electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, hoses, condenser fan, vacuum solenoid, idle speed controller, and control system. 2. Refrigeration System: The car air conditioning refrigeration system is composed of the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. These components are connected by copper pipes (or aluminum pipes) and high-pressure rubber hoses to form a sealed system. When the refrigeration system operates, the refrigerant circulates in different states within this sealed system. Each cycle is divided into four basic processes: compression, heat dissipation, throttling, and heat absorption. These processes repeat continuously to achieve the effect of lowering the temperature of the air around the evaporator.
13
1
Share

What Do You Learn on the First Day of Driving School?

On the first day of driving school, you will mainly learn the following: 1. Familiarize with the vehicle structure: The instructor will introduce the car's components and parts. 2. Learn to adjust the seat: Under the instructor's guidance, students need to adjust the seat to a suitable position based on their body type. 3. Learn how to use the steering wheel: Operation tips: Imagine the steering wheel as a clock, with the standard grip being the left hand at the 9 o'clock position and the right hand at the 3 o'clock position. Try to maintain control with both hands. After turning the wheel fully to the left or right, return both hands to the 3 and 9 o'clock positions. 4. Learn to drive in a straight line: Operation tips: Use the left heel as a pivot point, and press the pedal with the front part of the foot. Practice more to control the speed smoothly and slowly.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.