What are the approach angle and departure angle of the BMW X5?

1 Answers
PrestonLynn
07/30/25 3:25am
BMW X5 has an approach angle of 25.2 degrees and a departure angle of 22.3 degrees. Approach angle: Refers to the angle between the ground and a line tangent to the front tires when the vehicle is fully loaded and stationary, measured from the foremost protruding point of the front end. Departure angle: Refers to the angle between the ground and a line tangent to the rear tires when the vehicle is fully loaded and stationary, measured from the rearmost protruding point of the rear end. BMW X5 performance specifications: The BMW X5 3.0i is equipped with a dual overhead camshaft inline 6-cylinder engine, paired with a 6-speed automatic transmission (ATM+Steptronic). It has a displacement of 2979ml and a fuel consumption of 12.9 liters per 100 kilometers. The body dimensions are 4857×1933×1776mm, with a wheelbase of 2933mm.
Was this review help?
3
4
Share
More Forum Discussions

What transmission does the Hyundai Elantra use?

Hyundai Elantra uses a transmission from Hyundai Mobis in Korea. Below is some relevant information about Mobis: 1. Hyundai Mobis is a wholly-owned subsidiary of Hyundai in Korea, and its 6AT is primarily used in Hyundai, Kia, and future Chrysler vehicles. 2. Mobis is a rapidly growing Korean auto parts manufacturer. The mature development of its 6AT has led to its widespread use in Hyundai's own vehicle lineup, further reducing costs. Although this transmission is also a 6-speed like Aisin's, its biggest feature is its compatibility with Hyundai's high-revving engines, providing strong acceleration and excellent shift logic, which is on par with Aisin. 3. This transmission has a slowdown period after the initial peak acceleration, unlike Aisin's which starts softly and then becomes more aggressive. In terms of fuel efficiency, Aisin outperforms, but Hyundai's transmission is tailor-made for its own engines, ensuring a high level of compatibility.
16
2
Share

What is the best engine oil for the T-Roc?

Volkswagen T-Roc is equipped with a turbocharged engine, so it is recommended to use synthetic engine oil with a viscosity of 40. Common engine oil specifications include 0w30, 5w30, 0w40, 5w40, 0w20, 5w20, etc. The letter W in the engine oil specification stands for "winter," indicating that the oil can be used normally in winter. The number before the W indicates the oil's low-temperature flow performance, while the number after the W indicates the oil's high-temperature viscosity. 0w means the oil can still flow normally at -35 degrees Celsius, and 5w means the oil can still flow normally at -30 degrees Celsius. The higher the number after the W, the higher the viscosity of the oil. When the engine is running normally, the oil forms a film on the surface of various engine components, which prevents direct contact between parts and reduces engine wear. If the oil viscosity is too low, the oil cannot form a stable film on the surface of engine components, which will increase engine wear. If the oil viscosity is too high, the engine's operating resistance will increase, reducing engine power and increasing fuel consumption. Therefore, it is essential to choose the right viscosity oil. Here are the steps for changing the engine oil in a Volkswagen T-Roc: Open the engine cover (remove the four clips). Open the oil cap and insert the oil extractor tube into the oil dipstick port to extract the oil. The extraction process takes about 15-20 minutes, and the used oil can be collected in a bucket. After extracting the oil, use a wrench and socket to remove the old oil filter. Clean any excess oil from the contact area and then install the new oil filter. (Note: Usually, the oil filter is located on top, but some models require removing the oil filter from underneath the car.) After adding the new oil, check the oil level using the dipstick. The first time you check the dipstick, wipe it clean with a tissue and reinsert it. The second time you pull out the dipstick, you can determine the oil level. The dipstick has upper and lower limit marks, and the oil level should be between these two marks for normal operation.
6
1
Share

What is the method for replacing the remote control battery of the Touareg?

Touareg remote control battery replacement method is as follows: 1. Flip up the mechanical key hook on the back of the Touareg remote control and remove the mechanical key from the car remote. 2. Use a paperclip to insert into the small rectangular hole on the back of the key. Insert it all the way to the bottom, and a gap will pop up on the left chrome-plated part on the back. Remove the chrome-plated decorative piece along the gap. 3. Take out the button battery base from the battery compartment, replace the button battery, paying attention to the positive and negative polarity of the battery. After installation, return the mechanical key to its place. 4. Pay attention to the direction when reinstalling the mechanical key. The VW logo should face the direction of the remote control buttons during installation.
8
0
Share

Where is the USB port in the Mercedes-Benz A200?

The USB port in the Mercedes-Benz A200 is located inside the center armrest. The main functions of the USB port in a car include: 1. Utilizing the car's standard power supply to charge DC5V electrical devices via the USB port or serving as a fixed power interface for electrical devices. 2. The USB port, as a vehicle transmission cable, offers advantages such as fast transmission speed, ease of use, support for hot-swapping, flexible connection, and independent power supply. It is generally a universal interface for USB devices like flash drives and MP3 players. 3. The USB port in a car can be used for: playing music from a flash drive, charging mobile phones and MP3 players, serving as a USB car cigarette lighter interface, connecting electronic dogs and dash cams, and charging laptops and tablets.
19
4
Share

What brand is the Junpai car?

Junpai is a model series under Tianjin FAW, serving as the successor after the disappearance of Xiali. Below is an introduction to Tianjin FAW: 1. Currently available models include: Junpai D80, with an official guide price of 79,900-125,900 yuan, positioned as a compact SUV. Junpai A50, with an official guide price of 55,900-72,900 yuan, positioned as a compact car (A-segment). 2. Introduction to Tianjin FAW: The company's predecessor was Tianjin Automotive Xiali Co., Ltd., established on August 28, 1997. On June 14, 2002, China FAW Group Corporation and Tianjin Automotive Industry (Group) Co., Ltd. signed a joint reorganization agreement at the Great Hall of the People in Beijing. FAW Group holds 50.98% of the company's shares, giving it controlling ownership, and the company was officially integrated into the FAW system, hence the name Tianjin FAW Xiali Automobile Co., Ltd. 3. The FAW logo takes "FAW" from "First Automobile Works" as the core element, combining and evolving to form a "soaring eagle" visual image. It symbolizes FAW striving to soar high and spread its wings in the sky.
18
0
Share

Where is the air conditioning filter of the Nissan Livina?

The air conditioning filter of the Nissan Livina is located under the dashboard, inside the trim panel in front of the passenger seat. Below is an introduction to the Livina: 1. The Livina is a compact car designed by Nissan, targeting the market below 100,000 yuan, competing mainly with models like the POLO and Fit. The English name of the Livina is LIVINA, a combination of LIVING (home) and ACTIVE (activity). Its biggest selling points are its relatively good power configuration, more upscale exterior design, and spacious interior. 2. The currently available models of the Livina are the 2015 and 2013 versions, divided into National V and National IV standards, with prices ranging from 73,800 to 99,800 yuan.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.