What are the age restrictions for obtaining a driver's license?

What is the normal oil consumption rate for BMW per kilometer?

BMW consumes one liter of oil per thousand kilometers normally. The official standard given by BMW is that oil consumption within 0.7L per 1000 kilometers is normal, while the standard for the M series is 1.5L. More details about BMW oil consumption are as follows: Reasons for BMW oil consumption: Due to the inconsistency between domestic fuel quality and international standards, a large amount of carbon deposits can easily form in the combustion chamber during engine operation. Carbon deposits are an important cause of various engine problems, including oil consumption; carbon deposits accumulate in the piston grooves. Solutions for BMW oil consumption: Check if it is really oil consumption: In many cases, excessive oil consumption is mistakenly considered as oil burning due to oil leakage. You can place a white cloth under the engine, start the engine, and check for oil stains on the cloth to detect oil leakage; check if carbon deposits in the cylinder cause the piston rings to stick; replace the valve stem seals. The probability of BMW oil consumption caused by damaged valve stem seals is relatively high, and they can be replaced without dismantling the cylinder. Solving oil consumption by replacing valve stem seals can be considered a cost-effective method; check if the cylinder walls and pistons are severely worn with excessive clearance.

11

1

Share

If one fuel injector is broken, do all four need to be replaced?

Only the damaged fuel injector needs to be replaced. Below is relevant information about fuel injectors: 1. Definition: A fuel injector is essentially a normally closed valve (meaning the valve remains closed when no control signal is input; whereas a normally open valve remains open without a control signal), with its opening and closing controlled by the up-and-down movement of a valve needle. When the ECU issues a fuel injection command, the voltage signal causes current to flow through the coil inside the fuel injector, generating a magnetic field that lifts the valve needle, opening the valve to allow fuel to spray out through the injection hole. 2. Carbon deposit impact: As one of the key components of an electronically controlled fuel injection engine, the performance of the fuel injector significantly affects the engine's overall performance. A clogged fuel injector can severely impair vehicle performance. Clogging occurs due to carbon deposits from the engine accumulating on the injector or impurities in the fuel blocking the injector's pathways. After a period of driving, certain deposits will form in the fuel system.

6

2

Share

What Causes Weak Starter Performance?

The reasons for weak starter performance include a depleted battery, partial short circuits in the starter's armature or field coils, and internal mechanical faults in the starter. Depleted battery: Insufficient battery charge or poor connections in the wiring can create excessive resistance, reducing current flow and causing the starter to turn slowly. Partial short circuits in the starter's armature or field coils. Carefully inspect the starter circuit wiring and connections. Poor wiring or loose, corroded connections can generate heat due to increased resistance. Internal mechanical faults in the starter: If the power source, starter circuit, and starter switch are all in good condition, check if the starter bearings are too tight or if the armature shaft is bent, causing friction between the armature and the magnetic poles.

1

4

Share

How many kilometers can a car drive in one hour?

The distance varies greatly depending on the vehicle model and road conditions. In urban areas, the speed is generally 20-30 km/h, with a speed limit of 40 km/h; in suburban areas, it's typically 40-50 km/h, with a speed limit of 60 km/h; on highways, the speed usually ranges from 80 to 100 km/h. Below is an introduction to brake pedal operation: 1. Introduction to brake pedal operation: Car brake pedal operation can be categorized into gradual braking (also known as anticipatory braking), emergency braking, combined braking, and intermittent braking. Generally, when performing gradual or emergency braking, the clutch pedal should be fully depressed before the wheels lock or the car comes to a complete stop to prevent the engine from stalling and to facilitate speed adjustment. 2. Proper timing and pressure application are crucial: Under normal circumstances, avoid slamming the brake pedal. Instead, press the brake pedal first, adjusting the pressure according to the situation—apply quick and firm pressure when driving at higher speeds, and gentle and steady pressure at lower speeds. Then, adjust the pressure further based on specific conditions.

18

4

Share

How often should the oil in a car's air conditioning compressor be replaced?

In general, the oil in a car's air conditioning compressor does not need to be replaced; the compressor itself is usually replaced directly. Below is a detailed introduction to car air conditioning compressors: The function and types of car air conditioning compressors: The car air conditioning compressor is the heart of the car's air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. They are typically categorized into fixed-displacement compressors and variable-displacement compressors. Maintenance tips for car air conditioning compressors: Check if the refrigerant is sufficient, regularly inspect whether the compressor belt is properly tensioned, and listen for any unusual noises during operation. Adjust or replace parts as necessary.

4

2

Share

Does the new Cayenne use the EA888 engine?

The new Cayenne is equipped with the EA888-2.0T engine. The EA888 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI has a maximum power of 118kW (160PS) at 5000-6200rpm and a maximum torque of 250Nm at 1500-4500rpm. The 2.0TSI can reach a maximum power of 147kW (200PS) at 5100-6000rpm and a maximum torque of 280Nm at 1700-5000rpm. The EA888 engine is the main engine for mid-to-high-end models under the Volkswagen Group, including 1.8L and 2.0L displacements. It integrates technologies such as direct fuel injection, turbocharging, and variable valve timing. With ample low-speed torque, excellent fuel economy, and top-tier reliability, it is installed in various models under the Volkswagen Group, including the Magotan, CC, Tiguan, Passat, and Audi Q5. The working principle of the EA888 engine mainly involves controlling the hydraulic oil in the corresponding pipelines through the camshaft adjustment valve to drive the vanes in the adjuster, thereby rotating the camshaft to advance or delay the opening and closing of the valves, with an adjustable range of up to 60 degrees of crankshaft angle.

12

5

Share

What are the age restrictions for obtaining a driver's license?

What is the normal oil consumption rate for BMW per kilometer?

If one fuel injector is broken, do all four need to be replaced?

What Causes Weak Starter Performance?

How many kilometers can a car drive in one hour?

How often should the oil in a car's air conditioning compressor be replaced?

Does the new Cayenne use the EA888 engine?

Is it a traffic violation to drive at 124 km/h when the speed limit is 120?

Which direction to turn the steering wheel for parallel parking?

What are the slope requirements for fire lanes?

Is it considered overloading to have four people seated in the back row of a small car?