What are the advantages of SAIC Blue Core engines?

2 Answers
MacHope
07/29/25 11:15am
SAIC Blue Core engines are primarily known for their superior quality and high durability. Below is a detailed introduction to the advantages of SAIC Blue Core engines: 1. Composition: The SAIC Blue Core engines consist of two series: SGE and MGE. The SGE series was jointly developed by SAIC and General Motors, comprising a total of 11 engines with displacements ranging from 1.0L to 1.5L, including both three-cylinder and four-cylinder configurations, as well as turbocharged and naturally aspirated variants. The SAIC Blue Core engines emphasize fuel efficiency, durability, and strong power output. 2. Related Data: The power output ranges from 56 kW to 123 kW, and torque ranges from 95 Nm to 250 Nm. Currently available in the market are the 1.0T, 1.4T, and 1.5T turbocharged engines. The MGE series engines are independently developed by SAIC, focusing on the development of SAIC's inline all-aluminum four-cylinder engines, with displacements mainly including 1.8T, 2.0T, and 2.0L. Their power output ranges from 120 kW to 162 kW, and torque ranges from 200 Nm to 350 Nm.
Was this review help?
17
1
Share
EvanFitz
08/13/25 6:09pm
I've been using my Roewe car with the Blue Core engine for several years, and what stands out most is its reliability and ease of maintenance. In daily driving, the fuel consumption has always been low, averaging just over 6 liters per 100 kilometers in urban areas, and even more economical on highways. The engine runs smoothly with minimal noise and vibration, making the driving experience very comfortable. Maintenance is straightforward and affordable with regular servicing, and the parts have a long lifespan, rarely requiring major replacements. It meets high environmental standards with clean emissions, making it eco-friendly. As an experienced driver, I value durability, and this engine is well-designed with low friction, saving money and hassle in the long run. From purchase to now, after tens of thousands of kilometers, there have been no major issues. Fuel costs are nearly 30% lower compared to friends' similar cars, making it a cost-effective choice in the long term.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Has the Mercedes-Benz CLA been discontinued?

The Mercedes-Benz CLA has been discontinued. Below is a relevant introduction to the Mercedes-Benz CLA: 1. Powertrain: Equipped with a 2.0-liter four-cylinder turbocharged engine, delivering a maximum output of 355 horsepower (265 kW) and a peak torque of 450 Nm. The transmission is paired with a seven-speed AMG SPEEDSHIFT DCT sports transmission. 2. Interior: Features a brand-new three-spoke sports steering wheel, X-shaped air vents, a split-screen display, and a redesigned instrument panel, all of which provide a refreshing and sporty touch.
19
1
Share

How Often Should the Camry's Coolant Be Replaced?

Generally, the coolant in a Camry should be replaced every two years or approximately 40,000 kilometers. Before completely replacing the coolant, a thorough inspection should be conducted to check for any signs of leakage or cracks in the pipes, with particular attention to the five-way water pipe. The five-way pipe gets its name from having five connecting interfaces to various parts. The coolant flows through the five-way pipe and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, the water pipe should be replaced or the interface re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Then, idle the engine for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Continue adding clean water until the outflow is clear. Note: Don’t forget to remove the heater hose and drain the water from the heater core. About one hour after draining, add the new coolant through the radiator hose, which allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the system. Top up the coolant again until it reaches the "MAXT" mark on the reservoir.
15
3
Share

How to Sleep in the Car Without Feeling Hot in Summer?

Sleeping in the car with the air conditioning on will prevent you from feeling hot during summer. Precautions: 1. Poor air circulation: With the windows closed, the air inside the car does not circulate, preventing fresh oxygen from entering. The air conditioning's recirculation mode can introduce a certain amount of carbon monoxide. Carbon monoxide is colorless and odorless; inhaling a small amount is harmless, but as its concentration increases, it can lead to oxygen deprivation and death. 2. Low oxygen levels: Prolonged use of the recirculation mode can deteriorate the air quality inside the car. Over time, the reduced oxygen levels and increased carbon monoxide concentration can cause symptoms like chest tightness, shortness of breath, and dizziness.
4
2
Share

Why is the reversing image reversed?

The following are possible reasons why the reversing image is reversed: 1. Incorrect installation of front and rear cameras: Mistakenly installing the front camera at the rear of the vehicle. The main difference between front-view and rear-view cameras lies in the image mirroring. If a rear-view camera is used as a front-view camera, the image displayed on the screen will be reversed left and right. 2. System setting issues: The driver can re-engage reverse gear, find the settings button in the navigation device under the reversing image mode, look for the mirror adjustment or reversing mirror function, and then click to turn it off.
13
5
Share

What are the functional introductions of the Haval H6max?

Haval H6max's functional introductions can be explained from both the powertrain and the model aspects. Powertrain aspect: The Haval H6max is equipped with a 1.5GDIT-EVO engine, paired with the second-generation 7DCT transmission, delivering a maximum power of 124kW and a peak torque of 285Nm. It is worth mentioning that the powertrain of the H6max has undergone significant upgrades in all aspects, with the engine's thermal efficiency reaching 38% and the transmission's comprehensive transmission efficiency reaching 95.6%. Model aspect: The Haval H6max has an overall design that appears more fashionable and sporty. The front face still features a large-sized air intake grille, fully adorned with chrome accents, and the mesh design is very tight, creating a strong visual impact. On the side of the body, the vehicle's visual effect appears larger, which is attributed to the newly designed larger rear quarter window. It is worth noting that the overall dimensions of the H6max have been increased compared to the older models.
4
5
Share

How to display speed on Audi A4 dashboard?

Audi A4 dashboard can display speed. Method to display speed: First, press the page switching button on Audi's multifunctional dashboard to adjust the information displayed on the driving display. The driving display will first show the automatic lighting option. After the automatic lighting option is displayed, locate the activation button on the left side of the steering wheel. Pressing the activation button will display the driving speed. Display of car speedometer: One type of car speedometer displays speed via LCD, with similar principles, except the output is shown on an LCD screen. The speedometer consists of a permanent magnet fastened to the drive shaft, an aluminum cup with shaft and pointer, a housing, and a dial firmly attached to the case. When not in operation, the aluminum cup, under the force of a spiral spring, keeps the pointer at the zero position on the scale. When the car is moving, the drive shaft rotates the permanent magnet, whose magnetic lines of force generate eddy currents in the aluminum cup. The interaction between the eddy currents and the magnetic field of the permanent magnet produces torque, overcoming the elastic force of the spiral spring, causing the aluminum cup to turn the pointer by an angle.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.