···
Log in / Register

What are the advantages of dry dual-clutch transmissions?

4 Answers
VanJuliana
09/02/25 2:28am
More fuel-efficient than AT, better handling than CVT, high transmission efficiency, and quick acceleration. The structure of dry dual-clutch is relatively simple, with extremely low maintenance costs. Below are detailed introductions to the advantages of dry dual-clutch: Strong practicality: Mostly used in small-displacement models with strong practicality. Dual-clutch transmissions are currently popular transmissions, known for their fast shifting speed. High clutch transmission efficiency: The clutch plates of dry dual-clutch transmissions are not immersed in transmission oil. The shifting speed of dry dual-clutch transmissions is faster than that of wet dual-clutch transmissions.
Was this review help?
2
3
Share
Bo
09/14/25 4:50am
I've driven several cars with dry dual-clutch transmissions, and each time I've found them exceptionally suitable for daily commuting. The gear shifts are astonishingly fast, with almost no noticeable jerkiness, especially when starting from traffic lights—step on the throttle, and the car surges forward. The fuel efficiency is remarkable—I've calculated savings of around a hundred bucks a month on gas. The lightweight design makes the car more agile, easing turns and parking, while long-term maintenance costs are lower compared to wet-clutch transmissions, which are more high-maintenance. Of course, they perform best in congested areas without overheating issues. In short, they offer both driving pleasure and cost-effectiveness, making them a great recommendation for those who prioritize efficiency.
Was this review help?
11
3
Share
Expand All
SanReagan
09/14/25 4:52am
As a seasoned driver with over two decades of experience, I deeply appreciate the advantages of dry dual-clutch transmissions. They shift crisply without delay, offer high fuel efficiency with minimal power loss, making the car more economical to drive. Their lightweight design reduces engine burden, and they're simple and cost-effective to maintain with good reliability. They provide smooth and stable performance during highway cruising and rarely malfunction in stop-and-go city traffic. Compared to traditional automatic transmissions, they respond faster, giving drivers more confidence. The clever design uses air to cool the clutch plates, significantly improving efficiency.
Was this review help?
1
2
Share
Expand All
McCatherine
10/28/25 5:33am
I usually drive my kids to and from school, and the dry dual-clutch transmission makes driving simple and worry-free. Fast and smooth gear shifts with no jerking, saving fuel and money—significantly reducing monthly fuel expenses. The lightweight design keeps the car nimble, making parking easy, especially suitable for city life. Easy to operate, even beginners can get the hang of it quickly. Affordable pricing means lower initial costs and long-term economic benefits. It performs reliably in heavy traffic without any sluggishness.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What are the differences between the three major components of the Atz and the Camry?

The differences between the three major components of the Atz and the Camry are as follows: Power: The 2.5 Atz has a maximum horsepower of 192 hp, a maximum power of 141 kW, and a maximum torque of 252 Nm. The Camry 2.5 model has a maximum horsepower of 209 hp, a maximum power of 154 kW, and a maximum torque of 250 Nm. In terms of power, the Camry has a slight advantage. Transmission: The Camry is equipped with an 8AT transmission, which has a slight advantage over the 6AT transmission in terms of technology and fuel economy. The Atz's 6AT transmission was jointly developed by Mazda and Aisin, with very high transmission efficiency. Toyota's 8AT transmission is also provided by Aisin. Suspension: The Atz features a front MacPherson strut independent suspension and a rear multi-link independent suspension, while the Camry uses a front MacPherson strut independent suspension and a rear double-wishbone independent suspension. There is not much difference between the two suspension systems, but the Atz's chassis is tighter and more sport-tuned. The Camry adopts the new TNGA architecture, which significantly improves handling but still leans slightly towards comfort tuning.
1
3
Share

Is the Breeze engine imported or domestically produced?

The Breeze engine is not imported; it is produced domestically using Honda's technology. The Honda Breeze is equipped with the L15BT 1.5-liter turbocharged engine, which is also part of Honda's Earth Dreams series, a key engine lineup from Honda. Below are more details about the new Breeze: 1. Exterior: The hexagonal grille design has been removed, replaced by refined and dynamic chrome accents and sharp LED headlights, combined with the Honda emblem, creating a strong visual impact. The interior features flowing LED turn signals that enhance the sporty feel. 2. Interior: The Breeze's interior largely maintains the CR-V's design, but with some adjustments in materials and details. The 1.5T high-end model will be equipped with the Honda CONNECT 2.0 intelligent connectivity system.
18
1
Share

What Are the Symptoms of a Faulty Car Thermostat?

After starting the engine, inspect by opening the filler cap of the coolant reservoir to see if there is any water flow inside. If there is no flow, it indicates that the thermostat is damaged or there is debris stuck between the main valve switches. The symptoms of a faulty thermostat are as follows: 1. Thermostat malfunction, where the opening is too small, affecting the engine's large and small circulation cycles, preventing effective heat dissipation, leading to increased engine temperature and the illumination of the coolant temperature warning light; 2. Thermostat opening too large, causing the engine temperature to be too low, slow temperature rise, increased fuel consumption, and abnormal engine noises; 3. Thermostat sticking, which can easily lead to carbon buildup, causing unstable engine idle and resulting in engine vibration.
19
2
Share

What type of engine oil is suitable for the Roewe RX5?

Roewe RX5 generally uses 5W-30 fully synthetic engine oil. If the temperature in your area is relatively low, it is recommended to use 0W-30 fully synthetic engine oil. The reasons are as follows: 1. In terms of power, it is divided into two types: 1.5T and 2.0T, matched with three types of transmissions: 6-speed dual-clutch, 7-speed dual-clutch, and 6-speed manual. 2. The vehicle's engine is a turbocharged engine, which has higher lubrication requirements for engine oil because turbocharging operates under high temperature and high speed conditions. In this case, fully synthetic engine oil must be used. 3. With fully synthetic engine oil, maintenance is required approximately once a year or every 10,000 kilometers.
7
3
Share

What brand is the engine of the Haima S5?

Haima's engines are all self-produced, with the model being HMAGN16-VF1, utilizing VVT variable valve timing and VIS variable intake manifold technology. The maximum power is 90kW/6000rpm, and the maximum torque is 160Nm/4000rpm. Below is some relevant information about Haima: The Haima S5 is positioned as a compact SUV by Haima Motors, incorporating many popular design elements of the time; such as a starry dot-matrix grille, raised engine hood on both sides, split headlights and fog lights, boomerang-style taillights, and dual single-exit exhaust pipes. The fastback-style roof line elongates the visual perception of the car's side profile, making it look more muscular.
11
4
Share

What are the symptoms of a faulty Wuling Rongguang EGR valve?

The most obvious symptom of a faulty Wuling Rongguang EGR valve is that it causes the engine's idle speed to become extremely unstable, even stalling. The EGR valve is a component of the exhaust gas recirculation control system. When the EGR valve fails, symptoms may include extremely unstable idle speed or stalling, flashing check engine light, failure to meet emission standards during annual inspection, burning engine oil, and blue smoke from the exhaust. Below is more information about the EGR valve: The EGR valve is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculated back into the intake system. It is usually located on the right side of the intake manifold, near the throttle body, and is connected to the exhaust manifold via a short metal pipe. Its function is to regulate the amount of exhaust gas entering the intake manifold for recirculation. The EGR valve is a crucial component in the exhaust gas recirculation system, used to reduce the emission of nitrogen oxides (NOx) in the exhaust.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.