What are the advantages and disadvantages of green and blue license plates?

1 Answers
StKai
07/30/25 7:56am
Blue license plate advantages: Easy to transfer to children. Can retain value and be preserved. Blue license plate disadvantages: Expensive. Green license plate advantages: No traffic restrictions, nationwide access. Low cost. Government promotes green plates. Green license plate disadvantages: No appreciation potential. Below are the relevant introductions: 1. Blue license plate: Small vehicle license plate, white characters on blue background with white borders, installed on trucks with a total weight below 4500KG (excluding) and vehicles with seating capacity (excluding the driver) below 20 people (excluding) and body length below 6 meters (excluding). 2. Green license plate: Green license plates are new energy vehicle plates. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new on-board power devices), integrating advanced technologies in vehicle power control and drive systems, forming vehicles with advanced technical principles, new technologies, and new structures.
Was this review help?
17
4
Share
More Forum Discussions

Where is the trunk switch button generally located?

The trunk button of the car is located on the door next to the driver's seat or on the smart key. Here are the methods to open the trunk: 1. Open the car door, forcefully pull up the button below the handle, and then push the trunk upwards; 2. Press the one-touch trunk opening button in the middle of the car key, hold it for about three seconds, and the trunk will open. Additional information: The reasons why the trunk cannot be closed include the use of overly stiff spring rods in the automatic lift switch, improper matching between the closing limit rubber block and the locking mechanism, trunk control circuit failure, and trunk hydraulic support rod failure.
17
1
Share

What is the displacement of the BMW M5?

The displacement of the BMW M5 is 4.4 liters. The BMW M5 is a 4-door, 5-seater mid-to-large-sized sedan with exterior dimensions of 4966mm in length, 1903mm in width, and 1493mm in height, with a wheelbase of 2982mm. It is equipped with a 4.4T twin-turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 441 kW and a maximum torque of 750 Nm. The BMW M5 has a fuel tank capacity of 68 liters, features front-engine all-wheel drive, and uses aluminum alloy for both the cylinder head and block. The front suspension employs a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension.
4
5
Share

How to Solve the Problem of Vehicle Drifting While Driving?

Vehicle drifting may be related to tires or front wheel alignment. Here are the solutions for car drifting: 1. It is rare for drifting to be caused by tires. If the tire treads are different or the tire pressures are uneven, drifting will inevitably occur when the tires roll. The solution is to replace the tires with the same specifications and tread patterns while balancing the tire pressure. 2. Secondly, incorrect camber angle, kingpin angle, or too small toe angle of the front wheels can also cause drifting, which is the main reason for drifting. Incorrect front wheel alignment is similar to a misaligned bicycle handlebar. Simply performing a four-wheel alignment to readjust the angles will solve the problem. Under normal driving conditions, a four-wheel alignment is not necessary for one or two years.
17
0
Share

How Often Should Car Sealing Strips Be Replaced?

Under normal circumstances, sealing strips should be replaced every 3 to 4 years. Sealing strips are found on car doors, windshields, and window regulators. Their function is to prevent water from entering the car, improve sound insulation performance, and reduce wind noise while driving. Below are the steps for replacing sealing strips: 1. Prepare glue and new sealing strips. 2. Slowly remove the old sealing strip along its track and wipe the track clean with a cloth. 3. Apply glue evenly along the edge of the sunroof, ensuring every part is covered. 4. Slowly adhere the new sealing strip along the sunroof track. 5. Press firmly on the sealing strip during installation to ensure it sticks properly.
19
4
Share

Can You Get Struck by Lightning in a Car?

You cannot get struck by lightning in a car. Here are the reasons why: 1. Tires are made of rubber, which is an insulator. Lightning is a form of electric current, and for the current to conduct, both sides must be conductors. Although a car has a large metal shell, the presence of tires makes the car itself an insulator, so lightning will not target the car. Of course, if the tires are submerged in water and become conductors, that's a different story. 2. Even if lightning strikes the car body, the current will only flow along the outer surface, damaging the exterior. The people inside the car, the seats they sit on, and the steering wheel they hold are all wrapped in insulating materials, preventing conduction. Therefore, even if the car is struck by lightning, the occupants inside will remain unharmed.
12
3
Share

What Items Need to Be Replaced During the First Car Maintenance?

Car first maintenance items are as follows: 1. Replace engine oil, oil filter, fuel filter, and air filter. 2. Check whether the car coolant level meets the specified requirements. 3. Check the brake and clutch fluid levels. 4. Check whether the power steering fluid reservoir level meets the specified requirements and inspect all oil pipe interfaces in the system for any leakage. 5. Check the battery fluid level and windshield washer fluid reservoir level. 6. Inspect the tension and aging condition of the generator, air conditioning, water pump, and power steering pump belts. 7. Check whether all front and rear car lights are functioning properly.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.