What are the advantages and disadvantages of an intake supercharger pump?

2 Answers
LeJosie
07/24/25 6:39pm
The advantage of an intake supercharger pump is its simple maintenance, while the disadvantage is its short lifespan. Below is an introduction to the knowledge about intake supercharger pumps: 1. Advantages of an intake supercharger pump: The supercharger pump has fewer parts and seals, making maintenance simple and cost-effective. Together with its compound boosting capability, the supercharger pump features high output performance at a low cost. 2. Disadvantages of an intake supercharger pump: High-pressure superchargers indefinitely reduce the diameter of the steel wheel in the turbine housing flow path, causing the supercharger to operate at overspeed continuously, with an average speed 20,000–30,000 RPM higher than that of ordinary superchargers. The lifespan of a high-pressure supercharger is only two-thirds that of a standard supercharger, and the lifespan of high-pressure superchargers from small manufacturers is even shorter.
Was this review help?
8
1
Share
MacSienna
08/11/25 10:24am
As a veteran driver with 20 years of experience, I've tried the intake supercharger several times. The benefits are quite tangible—the most noticeable being increased engine power, quicker acceleration, easier hill climbing, and a more relaxed long-distance drive. It feels like the car has regained 10 years of youth. However, there are also significant drawbacks: fuel consumption rises sharply, especially in traffic jams where it burns through money like crazy. Engine wear accelerates, requiring more frequent maintenance and additional expenses. Installation must be done by professionals; otherwise, improperly connected pipes can lead to oil leaks or even engine failure. That's why I've only installed it twice before removing it—safety first. Regular checks on the cooling system and using reliable engine oil can extend its lifespan a bit, but overall, if it's not done right, it's better not to modify at all to avoid unnecessary trouble.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the bulb model of the Baojun 360?

The bulb model of the Baojun 360 is 9005, which is a combined high and low beam. The Baojun 360 is a 6-seater family car under SAIC-GM-Wuling, with a body length, width, and height of 4615mm, 1735mm, and 1660mm respectively, and a wheelbase of 2750mm. The Baojun 360 features a highly original exterior design with sharp and prominent body lines, presenting a dignified yet youthful appearance that meets users' diverse daily driving scenarios. Its front face adopts a new hexagonal grille design, paired with eagle-eye headlights. The side profile features a waistline that runs through the front and rear light groups, complemented by lower creases that echo the rear design. Together with the streamlined roof and spoiler, it creates a floating roof style.
1
0
Share

What to Do When the Brakes Fail While Driving?

When the brakes fail while driving, the solution is: the driver should control the direction according to the road conditions and speed, shift from a high gear to a low gear, and simultaneously press the accelerator pedal once. This will create significant traction resistance from the engine, rapidly reducing the vehicle's speed. Additionally, while shifting to a low gear, the handbrake should be used in combination. However, it is important to note that the handbrake should not be applied too tightly or too slowly. Pulling it too tightly may cause the brake disc to lock up, while pulling it too slowly may result in wear and overheating of the brake disc, leading to loss of braking effectiveness. Furthermore, the vehicle's rigid parts, such as the bumper or body, can be used to rub or collide with natural obstacles on the roadside to force a stop and escape danger, thereby minimizing accident losses as much as possible.
12
1
Share

What does it mean when the fuel reaches the reserve level?

The fuel reaching the reserve level means that the remaining fuel in the tank is low. When the fuel warning light comes on, please refuel in time to avoid being unable to start the vehicle due to insufficient fuel. Also, be careful not to drive blindly with confidence, as the fuel gauge may be inaccurate, leading to a lack of fuel and inability to start. Additional information: Precautions for refueling: 1. Properly place the fuel nozzle: Avoid fuel overflow, which can cause fires or even explosions. 2. Close the fuel tank cap: After refueling, repeatedly confirm whether the fuel tank cap is locked, otherwise driving is extremely unsafe. 3. Static electricity prevention: During the refueling process, all personnel should try not to stay in the vehicle; if staying in the vehicle, be sure to close the door. Static electricity prevention is also an important aspect of refueling. Before handling the fuel nozzle, discharge static electricity by touching metal or other conductive objects. 4. Power off: Turn off all power sources while refueling to avoid accidents.
15
2
Share

How Often Should Car Air Conditioning Refrigerant Be Replenished?

Car air conditioning refrigerant should be replenished every 5 years. The process of replenishing is as follows: 1. Evacuate the system, close the manual valves on the pressure gauge and the high and low pressure manual valves; 2. Connect one end of the hose to the injection valve joint of the refrigerant tank; 3. Open the refrigerant tank, loosen the nut on the pressure gauge hose, allow some gas to escape, then close it; 4. Open the high-pressure side manual valve and invert the tank; 5. Inject the specified amount of liquid refrigerant, then close the refrigerant injection valve and the high-pressure manual valve. Methods to determine if the car air conditioning refrigerant is insufficient include: 1. When the air conditioning is operating normally and continuously, if there are continuous bubbles in the sight glass, it indicates insufficient refrigerant; 2. When the air conditioning is operating normally and continuously, if there are no bubbles in the sight glass, but brief bubbles appear when the air conditioning stops, it indicates the refrigerant level is normal.
3
0
Share

How to Set Cruise Control in a Vehicle?

To set cruise control in a vehicle, follow these steps: After the system is activated and the car reaches the desired speed, press the SET button once to maintain that speed continuously. Once the cruising speed is set, you can still accelerate using the throttle pedal as usual. When you release the throttle pedal, the system will return the car to the set cruising speed. However, if after accelerating, the speed exceeds the cruising speed and maintains that speed for more than 5 minutes, you must reset the cruising speed. Cruise control, also known as speed control system or autonomous driving system, automatically maintains the vehicle's speed as set by the driver without the need to press the throttle pedal. This allows the car to travel at a constant speed. Using this feature on long highway drives reduces driver fatigue by eliminating the need for manual speed control and minimizes unnecessary speed variations, which can also save fuel.
7
1
Share

Causes and Solutions for Abnormal Noise in Car Air Conditioning Compressors

Causes and solutions for abnormal noise in car air conditioning compressors are as follows: 1. Electromagnetic clutch failure: Due to the electromagnetic clutch's proximity to the ground, long-term driving can cause it to become contaminated with sewage or mud, leading to internal bearing damage and resulting in abnormal noise. Replacing the compressor bearing can resolve this issue. 2. Loose compressor drive belt: The operation of the car air conditioning compressor places high demands on the electromagnetic clutch. A loose drive belt increases the load on the electromagnetic clutch, which can easily cause damage to the clutch and, in severe cases, lead to compressor burnout. Damaged internal parts can be replaced, or the entire assembly can be replaced. 3. Insufficient generator output: Repeated engagement of the electromagnetic clutch can cause insufficient generator output, leading to inadequate working voltage for the compressor and resulting in abnormal noise. 4. Excessive or insufficient clearance between the electromagnetic clutch and the compressor: Excessive clearance between the electromagnetic clutch and the compressor increases impact, while insufficient clearance causes interference, both of which can lead to abnormal noise. Inspect the clutch electromagnetic coil and adjust the clutch clearance as specified. 5. Lack of lubrication: Insufficient lubrication inside the compressor can cause abnormal noise due to friction. After prolonged use, appropriate lubrication should be added to prevent abnormal noise or compressor failure.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.