···
Log in / Register

What are the actions for stopping in Subject 2?

4 Answers
VanJames
07/25/25 3:36am
The actions for stopping in Subject 2 include turning the steering wheel to the right, pressing the brake and clutch, pulling the handbrake, shifting to neutral, releasing the clutch, and stopping. Below is relevant information about Subject 2: Test Items: The test items consist of five mandatory sections: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Some regions may include a sixth item, such as high-speed card collection. Passing Criteria: The full score is 100 points, with evaluation standards set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required to pass. For other vehicle types, a score of 80 or above is considered passing.
Was this review help?
17
0
Share
StAshley
08/11/25 12:04pm
Last time when I was learning to drive and taking the Subject 2 test, what scared me the most was the parking maneuvers, especially parallel parking and reverse parking into a bay. The specific steps start with preparation: first adjust the rearview mirrors to ensure you can see both sides of the parking space, fasten the seatbelt, and choose reference points like roadside markings. Then slowly reverse, turn on the indicator to signal your intention, check the mirrors to align with the reference points, and keep the speed slow by coordinating the clutch and brake. Halfway through, turn the steering wheel quickly left or right to adjust the angle—don’t rush, it’s better to stop and adjust again than to hit the curb. After parking, firmly press the brake, shift to neutral, and pull the handbrake to ensure the car is correctly positioned without crossing the lines. The whole process requires repeated practice. Driving instructors often say, ‘Slow and steady wins the race.’ At first, I was always nervous and couldn’t remember the reference points, so I had to watch videos and practice more. Once you get the hang of it, it’s not scary anymore!
Was this review help?
1
5
Share
Expand All
Martha
09/27/25 3:24am
As someone who has gone through the driver's license test, parking maneuvers are crucial in Subject 2. Remember these key steps: First is the preparation phase - adjust the seat and mirrors to proper positions, and align reference points like poles or ground markings. Second is reversing control - maintain slow and steady speed, avoid sudden braking. Third is decisive steering - for parallel parking, wheel correction must be accurate, judge distance via mirrors before fine-tuning. Once aligned with parking space, brake immediately to secure position. Common mistakes include rushing and crossing lines or forgetting turn signals. Practice with slow-motion repetitions during training, find a quiet road to focus on several practice sessions. Safety first, stay calm during test - good mentality makes passing easier.
Was this review help?
15
5
Share
Expand All
Franklin
11/10/25 5:22am
The parking maneuver is fundamental and crucial in the driving test. Simply put, the steps are: first, position yourself in the car aligning with the reference point, then slowly reverse while observing the rearview mirrors; steer the wheel flexibly at turns without stiffness; and brake decisively when parking to prevent rolling. Don't overlook small details during regular practice to ensure a smooth test.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

Should the 2020 Buick Regal use 92 or 95 octane fuel?

For the 2020 Buick Regal, the 1.5T model is recommended to use 92 octane gasoline, while the 2.0T model should use 95 octane gasoline. These fuel grades are officially recommended in the vehicle's user manual. In addition to checking the appropriate gasoline grade in the user manual, the 2020 Buick Regal also indicates the recommended fuel grade on the fuel filler cap. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate fuel grade, as high compression ratios can also be tuned to use lower octane fuel. Other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the 2020 Buick Regal occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles that require low-octane fuel, using a higher octane fuel will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles that require high-octane fuel, using a lower octane fuel can cause engine knocking. Because the octane number is significantly lower, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without obvious damage to the engine. However, if the knocking is severe, it indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
1
0
Share

What is the tire model and size for the Elysion?

The tire size for the Elysion is 225/50R18. The first number, 225, represents the tire width of 225MM. The 50 indicates the aspect ratio of the tire's cross-section is 50%, meaning the height of the cross-section is 50% of the width. The 18 signifies the rim diameter is 18 inches, and the letter "R" in the middle stands for radial tire. The Elysion tires are branded as Yokohama and Dunlop, featuring a dual five-spoke wheel design, with the spare tire being non-full size. If you wish to replace the tires yourself, follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned directly under the vehicle and at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, but do not fully remove them—just enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures that the nuts turn, not the tire; Turn the nuts counterclockwise until they are loose, repeating this step for all lug nuts, then remove them completely; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts, install the lug nuts, and hand-tighten them until all nuts are snug. The tire replacement is now complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
13
5
Share

What does vehicle remote unlocking mean?

Vehicle remote unlocking refers to the ability to unlock car doors from a distance using certain tools. With the rapid development of the automotive industry, there are now more and more ways to unlock vehicles. In the early days before smart keys appeared, mechanical keys were inserted into the door keyhole to unlock the car, much like old-fashioned house door locks. With technological advancements, smart remote keys, keyless entry, mobile apps, and customer service center remote unlocking have gradually emerged. Taking Volvo On Call as an example, this feature is very powerful, and currently, this configuration is mostly available in mid-to-high-end models of Volvo vehicles, not as standard across the entire range.
9
2
Share

What is the valid shelf life of car tires?

Car tires have a valid shelf life of 5 years or 60,000 to 80,000 kilometers, depending on local road conditions and specific usage circumstances. The main component of tires is rubber, which has a shelf life, so tires naturally have one as well. Fresh rubber exhibits better performance in various aspects, hence newly manufactured tires also perform better. Tires are circular elastic rubber products mounted on vehicles or machinery to roll on the ground. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high/low temperature effects during operation, thus requiring high load-bearing capacity, traction performance, and cushioning properties.
1
2
Share

What brand is porchen?

porchen is the English logo of the Porsche brand. Here are some related introductions: 1. porchen is the English car logo of the Porsche brand, using the surname of Porsche founder Ferdinand Porsche. The graphic logo of Porsche adopts a shield design, with a horse in the middle, and deer antler patterns in yellow stripes at the top left and bottom right of the logo. 2. Porsche now belongs to the Volkswagen Group and is a luxury car brand under Volkswagen. Its headquarters is located in Stuttgart, Germany. The Porsche brand was established in 1931 and is a world-famous sports car brand.
2
5
Share

What kind of audio system is used in the Mercedes-Benz S-Class?

Mercedes-Benz S-Class is equipped with Burmester audio system. More details about the audio system in Mercedes-Benz S-Class are as follows: 1. Burmester high-end 3D surround sound system, with 27 speakers (13 tweeters, 7 mid-range speakers, 4 mid-woofers, 2 Frontbass woofers and a subwoofer), with a total power output of 1540W; combined with VIP settings, the sound effects can be adjusted according to different positions to ensure the best auditory experience for all seats; up to 5 audio preset options. 2. Burmester, founded in 1978, rose rapidly in the German High-End audio industry.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.