What are the 9-seater blue license plate business vehicles available?

1 Answers
AryaFitz
07/28/25 5:16pm
Introduction to 9-seater blue license plate business vehicles: Lingzhi: The Lingzhi M5 offers multiple seating configurations, with a maximum of 9 seats. Its exterior design is quite distinctive, bearing some resemblance to the new-generation Toyota Crown at first glance. This vehicle is suitable for both passenger transport and cargo hauling, equipped with a 1.6L engine paired with a manual transmission, delivering excellent performance in both power and fuel efficiency. Ruifeng M3: The Ruifeng M3 is positioned as a compact MPV, but it boasts superior loading capacity compared to typical compact MPVs, as it can accommodate up to 9 seats. With the rear seats folded down, the maximum cargo depth reaches 1.6 meters. The 9-seater version is powered by a 1.8L naturally aspirated engine matched with a 5-speed manual transmission, providing a nimble and responsive driving experience. Fengxing F600: The Fengxing F600 is positioned as a mid-to-large-size MPV, available in both 7-seater and 9-seater configurations. Its exterior design doesn't carry strong minivan aesthetics, making it suitable for both commercial and family use. Under the hood, it features a 2.0L naturally aspirated engine paired with a 6-speed manual transmission, offering a good balance between power and fuel economy. Additionally, it comes with features such as a rearview camera and a touchscreen multimedia system, making it a cost-effective choice.
Was this review help?
11
3
Share
More Forum Discussions

How to Remove a Car Wheel?

Wheel removal steps are: 1. Use a wrench to loosen the wheel nuts. 2. Use a jack to lift the vehicle and ensure it is stable. 3. Remove the wheel nuts, adopting a diagonal sequence when removing the hub bolts. 4. Take the wheel off and check if the hub is damaged. Wheel removal precautions and replacement steps: 1. If on the road, first park the car on a level and safe spot, turn on the hazard lights, and engage the handbrake. After confirming safety, place a triangular warning sign at an appropriate distance behind the car. 2. Retrieve the spare tire, tire wrench, and jack. 3. First, loosen the wheel bolts in a polygonal pattern. 4. Place the jack on the chassis support and slowly raise the car until the tire is slightly touching the ground, then remove the bolts one by one in a diagonal pattern. 5. Turn the jack again to raise the car until the tire just leaves the ground, ensuring there is enough space to fit the properly inflated spare tire. Then remove the tire to be replaced and install the spare tire. 6. After installing the tire, ensure the bolts are correctly positioned and tighten them in a diagonal pattern, but not to the tightest state. After lowering the wheel slowly with the jack, tighten the bolts completely.
20
0
Share

What is the complete operation process for the Subject 3 driving test?

Here is a detailed introduction to the complete operation process for the Subject 3 driving test: 1. First: Walk counterclockwise to the left front of the vehicle, turn your head left and right to observe, then proceed to the right rear of the vehicle and continue turning your head left and right to observe, and finally walk to the left front of the vehicle again, turning your head left and right to observe. 2. Next: After getting into the car, adjust the seat and the interior rearview mirror, fasten the seatbelt, pull the handbrake, press the clutch, shift to neutral, and start the ignition. 3. Then: It's best to press the brake pedal first after getting in the car. The first step is to press the clutch, the second is to shift into first gear, the fifth is to observe the rearview mirrors from right to center to left, the sixth is to release the handbrake, press the brake pedal, and slowly release the clutch to start the car in semi-linked state. 4. Finally: After choosing a suitable location to make a U-turn, immediately turn on the left turn signal. When turning, immediately turn on the right turn signal, check the right rearview mirror, confirm there are no vehicles approaching from behind, slow down, and shift down to the starting lane. Reduce to first gear when approaching the intersection for a right turn. During the right turn, remember to look back to check for any non-motorized vehicles behind you, make a reasonable turn, and pull over to park.
2
4
Share

What to Do If You Lose Your Car Electronic Key?

First, notify the 4S dealership to deactivate the original car key. Once deactivated, the original key can no longer start the engine. If only the key is lost and you still have the vehicle's registration certificate and your driver's license with you, you can try calling a locksmith to open the car door. If all your documents are locked inside the car, have someone watch the car while you quickly retrieve the spare key. Finally, if you can't find the spare key either, you'll need to get a replacement key. You can have a new key made at the 4S dealership or at a small roadside repair shop.
18
0
Share

How to Check Online If You Are Eligible for a Driver's License Test?

Search for the Guangdong Provincial Public Security Department's Traffic Safety Comprehensive Service Management Platform on your browser and click to enter the official website. Click on 'Personal Login' in the upper right corner and log in using your ID number and the initial password obtained when scheduling the test. After successfully logging into the website, find the 'Driver's License Services' option at the bottom of the homepage. Click on 'Local Test Scheduling' on the driver's license page to check the application information.
7
4
Share

What to Do When the Car Battery Overheats and Fails to Start?

Check the battery's appearance. If the deformation is very slight or there is no deformation, you can fully discharge the battery. Use a clean syringe to inject about 10ml of distilled water into each cell, then connect the charger and monitor the liquid level at all times. Once the charger turns green, remove the excess liquid. Reinstall the valve caps and cover plates, then mount the battery back in the car for use.
10
2
Share

How to Use the Cruise Control in Nissan Patrol?

Press the power button to activate the system, at which point the cruise control indicator light on the dashboard will illuminate. Accelerate to your desired speed (above 40km/h), then press the SET button. You can now release your foot from the accelerator pedal, as the speed is set at the current rate. There are three ways to deactivate cruise control: press the brake pedal, press the cancel (CANCEL) button, or press the power (ON/OFF) button. If cruise control is canceled by pressing the brake or the cancel button, you can press the RES button to resume the previously set cruise control speed.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.