What are the 7-seater off-road vehicles available?

1 Answers
Peter
07/29/25 5:20pm
7-seater off-road vehicles include Lincoln MKT, Chevrolet Blazer, Fengxing SX6, Haval H9, Ford Explorer, Audi Q7, etc. Off-road vehicles ORV (Off-Road Vehicle) are specially designed for off-road use, mainly referring to vehicles that can be used on rough terrain. Their main features include a non-load-bearing body, four-wheel drive, higher ground clearance, tires with better grip, higher exhaust pipes, greater horsepower, and sturdy bumpers. Below are the detailed introductions: The dimensions of the Lincoln MKT are 5273 mm in length, 1930 mm in width, and 1712 mm in height, with a wheelbase of 2995 mm. In terms of power, the Lincoln MKT is equipped with a 3.5T twin-turbocharged engine, which has a maximum power of 261 kW and a maximum torque of 475 Nm. The dimensions of the Chevrolet Blazer are 4999 mm in length, 1953 mm in width, and 1717 mm in height, with a wheelbase of 2863 mm. In terms of power, the Chevrolet Blazer is equipped with a 2.0T turbocharged engine, which has a maximum power of 174 kW and a maximum torque of 350 Nm. The dimensions of the Fengxing SX6 are 4720 mm in length, 1825 mm in width, and 1790 mm in height, with a wheelbase of 2750 mm. In terms of power, the Fengxing SX6 is equipped with a 1.6L naturally aspirated engine, which has a maximum power of 90 kW and a maximum torque of 151 Nm. The dimensions of the Haval H9 are 4843 mm in length, 1926 mm in width, and 1900 mm in height, with a wheelbase of 2800 mm. In terms of power, the Haval H9 is equipped with a 2.0T turbocharged engine, which has a maximum power of 165 kW and a maximum torque of 385 Nm. The dimensions of the Ford Explorer are 5075 mm in length, 2004 mm in width, and 1778 mm in height, with a wheelbase of 3025 mm. In terms of power, the Ford Explorer is equipped with a 2.3T turbocharged engine, which has a maximum power of 203 kW and a maximum torque of 425 Nm. The dimensions of the Audi Q7 are 5067 mm in length, 1970 mm in width, and 1712 mm in height, with a wheelbase of 2999 mm. In terms of power, the Audi Q7 is equipped with a 3.0T turbocharged engine, which has a maximum power of 250 kW and a maximum torque of 500 Nm.
Was this review help?
6
0
Share
More Forum Discussions

What is the audio brand of Lexus?

Lexus vehicles are equipped with Mark Levinson audio systems, one of the 16 audio brands under Harman. Initially, Mark Levinson products were primarily targeted at the stereo or home theater market, but they are now renowned as the 'official' audio system for Lexus. Lexus models such as the Lexus ES, Lexus RX, Lexus LS, Lexus LC, among others, are all fitted with Mark Levinson audio systems. As early as 2001, Mark Levinson became the exclusive partner for Lexus in-car audio systems. The Lexus 2001 LS430 was the first model to feature the Mark Levinson premium surround sound audio system. The latest surround sound system boasts 14 speakers with a power output of up to 330 watts, custom-designed for the third generation of Lexus vehicles.
8
5
Share

What are the requirements for ride-hailing vehicles?

Running a ride-hailing service requires the following conditions: 1. 3 years of driving experience: Obtain a motor vehicle driver's license for the corresponding vehicle type and have more than 3 years of driving experience. 2. No records: No record of traffic crime, no record of dangerous driving, no record of drug use, no record of drunk driving, and no record of accumulating 12 points in the last 3 consecutive scoring cycles. 3. Good service attitude: Maintain good professional ethics and enthusiastic service attitude, and pick up and drop off customers on time. 4. Careful inspection: Check the validity period of various vehicle documents.
15
0
Share

What are the factors that cause cylinder wear?

Factors causing cylinder wear include: 1. Poor lubrication - During engine operation, the upper part of the cylinder has poor lubrication conditions with high wall temperatures, making it difficult to form a good oil film. Additionally, fine oil droplets in the combustible mixture continuously wash the cylinder walls, further damaging the oil film and causing dry or semi-dry friction between the upper cylinder and piston rings; 2. Abrasive wear - When dust enters with air or lubricating oil contains impurities, abrasive wear occurs; 3. Mechanical wear from high pressure - During operation, piston rings press tightly against cylinder walls under their own elasticity and gas pressure, causing mechanical wear through relative friction during reciprocating motion; 4. Corrosion from acidic substances - Fuel contains a certain proportion of sulfur, whose combustion produces oxides that combine with water in byproducts to form sulfuric acid vapor, which condenses and corrodes cylinder walls.
2
4
Share

What models of fog lights are used for modifying the Volkswagen New Lavida?

When modifying the fog lights of the Volkswagen New Lavida, the fog light model required is H11, and the high/low beam light models are H1 and H7. Here is the relevant introduction: 1. Fog lights generally refer to the fog lights of a car. 2. Steps for installing fog lights on the Lavida: (1) Prepare a flat-head and Phillips screwdriver. (2) First, remove the front bumper. Before removing the front bumper, the grille must also be removed, using the screwdrivers. (3) There are screws inside the front fender liners, and there are six 10mm screws under the front bumper. Once all are removed, the front bumper can be taken off (the front bumper clips are quite tight, so be careful not to damage them when applying force). 3. The fog light switch generally has three positions: position 0 is off, the first position controls the front fog lights, and the second position controls the rear fog lights. 4. When the first position is engaged, the front fog lights work; when the second position is engaged, both front and rear fog lights work together. 5. The installation position of fog lights must be below the bumper and as close to the ground as possible to ensure their effectiveness. If installed too high, the light cannot penetrate the rain and fog to illuminate the road (fog is generally thinner below 1 meter), which can easily lead to danger.
18
5
Share

How to Open the Door When the Volkswagen Magotan Car Key Battery Dies?

When the Magotan remote key's battery is dead, you can use the Magotan's mechanical key to open the car door. Here are the specific steps: 1. The Magotan's mechanical key is hidden inside the remote. 2. First, press the small button on one side of the Magotan remote. The top of the remote will automatically pop out a small section. Grab the popped-out part with your hand and pull it out to reveal the mechanical key. 3. Then, go to the driver's side door of the Magotan. Locate the plastic cover on the right side of the door handle. Upon closer inspection, you will find a small rectangular slot at the bottom of the plastic cover. Insert the mechanical key or a flat-head screwdriver into this slot and gently pry upwards with a bit of force. Once the mechanical lock cover is opened, you will see the mechanical keyhole. 4. Insert the mechanical key into the keyhole and turn it left one full rotation. Then, pull the driver's side door handle to open the Magotan's door in an emergency when the remote key's battery is dead. 5. Method to lock the door when the remote key's battery is dead: After exiting the car, close the door, insert the spare key into the mechanical keyhole, turn it right one full rotation, and then remove the mechanical key to lock the door.
13
0
Share

Will the Tire Pressure Alarm Go Off After Changing Tires?

Will the tire pressure alarm go off after changing tires? Yes, after changing tires, the tire pressure monitoring system needs to be reset. The method to reset the tire pressure monitoring system is as follows: 1. Press the square icon button on the left side of the steering wheel; 2. Switch to the tire pressure detection screen; 3. Hold down the triangular icon button to clear and reset. The functions of the tire pressure monitoring system are: 1. To prevent accidents; 2. To extend the service life of the tires; 3. To reduce wear on the suspension system. The hazards of excessive tire pressure include: 1. Reduced friction and adhesion of the tires, affecting braking performance; 2. Causing steering wheel shaking and deviation, reducing driving comfort; 3. Accelerating localized wear on the central tread pattern, leading to tire bulging and stone trapping; 4. Causing excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body, increasing the load on the vehicle while driving, and decreasing puncture resistance.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.