What are the 6 types of new energy sources?

1 Answers
McFinn
07/24/25 6:32pm
New energy sources can be classified into the following categories, with specific details as follows: 1. Classification by formation and source: Energy derived from solar radiation, such as solar energy, hydro energy, wind energy, and bioenergy. Energy originating from within the Earth, such as nuclear energy and geothermal energy. Celestial gravitational energy, such as tidal energy. 2. Classification by development and utilization status: Conventional energy sources, such as hydro energy and nuclear energy. New energy sources, such as bioenergy, geothermal energy, ocean energy, solar energy, and wind energy. 3. Classification by attribute: Renewable energy sources, such as solar energy, geothermal energy, hydro energy, wind energy, bioenergy, and ocean energy. Non-renewable energy sources, such as nuclear energy. 4. Classification by conversion and transmission process: Primary energy sources, which are directly obtained from nature, such as hydro energy, wind energy, nuclear energy, ocean energy, and bioenergy. Secondary energy sources, such as biogas, steam, thermal power, hydropower, nuclear power, solar power, tidal power, and wave power.
Was this review help?
9
3
Share
More Forum Discussions

What do SUV and CRV mean?

Details are as follows: SUV: Refers to a Sport Utility Vehicle, which is different from an ORV (Off-Road Vehicle) that can be used on rough terrain. CRV: Generally refers to the Honda CR-V. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda Automobile Company. The full name of SUV is Sport-Utility-Vehicle, meaning a suburban utility vehicle, which combines the space functionality of a station wagon with the off-road capability of a pickup truck. The differences between SUV and CRV: 1. SUV is a Sport Utility Vehicle. CRV is a City Recreation Vehicle. 2. SUV has a chassis similar to that of a large truck with a frame, while CRV uses a car chassis. 3. SUV has stronger off-road performance compared to CRV.
15
0
Share

What is the fuel tank capacity of the CFMoto 250SR?

250SR, dimensions (LxWxH): 2010x750x1080mm, wheelbase: 1360mm, seat height: 780mm, fuel tank capacity: 12L. Below is an introduction to automotive fuel tanks: Fuel tank: A container for storing fuel on aircraft or automobiles, specifically designed to store hydraulic oil or hydraulic fluid in hydraulic systems. Fuel tanks can be divided into two types: open tanks and closed tanks. Functions: In addition to storing oil, fuel tanks in hydraulic systems also serve to dissipate heat, separate air bubbles from the oil, and settle impurities. Many auxiliary components are installed in fuel tanks, such as coolers, heaters, air filters, and liquid level gauges. Types: Fuel tanks can be divided into two types: open tanks and closed tanks. Open tanks have a liquid surface that is in contact with the atmosphere, and an air filter is installed on the tank cover.
3
5
Share

How to turn on the heater in Volvo S60?

There is a control panel in front of the gear shift: there are red and blue buttons below, the red button increases the temperature and the blue button decreases the temperature. First press the AUTO button, then press the red button, each press increases the temperature by one degree (pressing the blue button does the opposite), you can adjust it to the appropriate temperature. Or the simplest method is: just press the AUTO button. The usage of the 1.8t automatic transmission is the drive gear, shift to D gear and step on the gas to move. Move the gear shift to the +- area next to D, push up to increase a gear, push down to decrease a gear, which is the manual mode in the automatic transmission.
10
0
Share

What does 'ch' mean on the dashboard?

The 'ch' on the dashboard refers to the water temperature gauge. The water temperature is indicated from C to H. 'C' represents 60 degrees Celsius, and when the needle points to 'C', it means the water temperature has reached 60 degrees. The red 'H' mark indicates a temperature of 110 degrees Celsius, and the span from 60 to 110 degrees allows estimation of the water temperature. Below are reasons for excessively high water temperature: 1. Insufficient coolant: Coolant leakage or low coolant levels can cause the engine water temperature to rise. Regularly check the coolant level and top it up to the appropriate level if necessary. 2. Thermostat failure: The thermostat automatically adjusts the amount of coolant entering the radiator based on the coolant temperature, changing the coolant circulation range to regulate the cooling system's capacity and ensure the engine operates within the proper temperature range. If the thermostat fails, the car's cooling system may not engage in a major circulation, leading to increased water temperature.
15
2
Share

Can the CFMOTO Papio ST accommodate two people?

The CFMOTO Papio ST can accommodate two people, although it might feel a bit cramped. Here is more information about the CFMOTO Papio ST: Appearance: The CFMOTO Papio ST features a design that incorporates various trendy elements, with its unique and innovative styling highlighting the ingenuity of the design team. Performance: In terms of performance, the CFMOTO Papio ST is equipped with a 124cc single-cylinder air-cooled engine that delivers smooth and linear power output. Its fuel injection system performs exceptionally well, capable of producing a maximum torque of 8.3 Nm and a peak horsepower of 9Ps. Dimensions: The specific dimensions of the CFMOTO Papio ST are 1724x750x995mm, with a seat height of 775mm. For a rider who is 175cm tall, it is generally possible to have both feet flat on the ground, and the ground clearance is 145mm.
9
2
Share

What is the correct procedure to start and shut down a Volkswagen Lavida?

First, the driver should press the start button once to activate the ACC indicator light, then press it again to initiate the vehicle's self-check. Next, depress the brake pedal and press the one-touch start button to ignite the engine. Then release the foot brake, and you may choose to warm up the engine while stationary. Depress the brake pedal again, shift to D gear, and release the handbrake (for electronic parking brakes, simply press the button briefly). Finally, gradually release the foot brake, apply some throttle, and the vehicle will start moving. To shut down the vehicle, the driver should first firmly depress the brake pedal to bring the car to a complete stop. Then shift the gear from D to N, and engage the handbrake (for electronic parking brakes, pull the lever upward). Then release the foot brake, but do not turn off the power. Continue depressing the foot brake, shift from N gear to P gear. Finally, release the foot brake and press the one-touch start button to shut down the engine.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.