What are the 6 precautions for driving in rainy weather?

2 Answers
VanCecilia
07/28/25 9:06pm
There are 6 precautions for driving in rainy weather as follows: Pay attention to pedestrians: Pedestrians' visibility is inevitably affected on rainy days, so drivers must pay attention to pedestrians to avoid traffic accidents. Maintain good visibility: Rainy weather can easily lead to traffic accidents due to obstructed driver visibility, making it crucial to maintain good visibility. Slow down and drive cautiously: "Nine out of ten accidents are caused by speeding." Wet roads on rainy days require even more cautious driving. Prevent wheel skidding: Wet and slippery roads during rain make driving hazardous, so it's important to prevent wheel skidding. Stay away from large vehicles: Large vehicles pose many potential dangers to smaller vehicles when driving in the rain, so smaller vehicles should keep their distance. Avoid restarting the engine after stalling: When driving in the rain, be sure to prevent water from entering the engine.
Was this review help?
12
4
Share
StManuel
08/12/25 1:47am
As a young driver who just got my license, driving in the rain used to make my heart race. I learned to slow down because tires are more prone to skidding at higher speeds; maintain twice the usual following distance since braking distances are longer in the rain; turn on headlights to increase visibility, even using low beams during the day; regularly check if wipers are clean, otherwise the windshield gets blurry; proceed cautiously through puddles at reduced speed, as hitting standing water can cause loss of control; avoid sudden braking or sharp turns, keeping the steering wheel steady. These tips helped me navigate heavy rain safely, and now I feel more relaxed with experience. Developing routine checks, like replacing wiper blades before rainy season, prevents many hassles.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What is the method for resetting the tire pressure on a Civic?

Before resetting the tire pressure on a Civic, you should first restore the tire pressure to the normal level; turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. At this point, the tire pressure monitoring system will store the current normal tire pressure data and automatically clear the previous data; press and hold the SET button on the center console until the tire pressure data is refreshed and the tire pressure warning light disappears. Tire Pressure Reset: Tire pressure reset is the operation of resetting the tire pressure monitoring system after the tire pressure fault has been resolved. Tire Pressure Reset Method: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data and automatically clear the previous data. Finally, the fault light on the dashboard will turn off, indicating that the tire pressure reset is complete.
15
5
Share

Can I Get a Refund for Driver's License Application?

It is possible to get a refund for the driver's license application fee, but the refund may not be full depending on the circumstances. There is currently no unified regulation regarding the refund standards. The specific refund amount depends on the service agreement signed at the time. For driving school registration, if you withdraw before taking the medical examination or fail the medical examination, the service fee will be deducted, but some driving schools may offer a full refund. If you withdraw after passing the medical examination and obtaining student status but before taking the first subject exam, management fees, penalty agreement fees, card production fees, and medical examination fees will be deducted. If you withdraw after passing the first subject exam and starting practical training, management fees, penalty agreement fees, medical examination fees, and actual training fees (calculated per hour of training) will be deducted. If you need to change driving schools due to issues caused by the driving school, you can report the matter to the traffic management department or relevant authorities to protect your legal rights. If you wish to change driving schools after completing the first subject exam due to issues caused by the driving school, you can negotiate with the driving school. If the negotiation fails, you can contact other relevant authorities for assistance. If you wish to change driving schools after completing the first subject exam for personal reasons, the solution is to negotiate with the driving school. The difference between these two scenarios lies in whether the request to change driving schools is made before or after the first subject exam.
18
3
Share

Is Modifying Coilover Suspension Considered Illegal?

Modifying coilover suspension is not considered illegal. Here is an introduction to coilover suspension: 1. Introduction: Coilover suspension (Height-Adjustable Damper) - derived from racing technology, refers to shock absorbers with adjustable (spring) height design. To a certain extent, height-adjustable shock absorbers can be used to adjust the static weight distribution, including the driver and fuel load. 2. Purpose: From a practical perspective, if the goal is simply to lower the vehicle height and reduce body roll during cornering, simply replacing the springs with shorter and stiffer ones along with corresponding shock absorbers would be more hassle-free.
8
1
Share

What is Tesla's Compensation Plan?

According to Tesla's official website, Tesla offers two compensation plans: 1) Maintain the original order price and upgrade the originally included Enhanced Autopilot (EAP) to Autopilot + Full Self-Driving Capability (AP+FSD) for free; or 2) Enjoy the new official website price for the order, with Autopilot (AP) or Full Self-Driving Capability (FSD) available as additional options at the official website prices. Tesla models include: 1. Model X: The Model X is an SUV but with a lower center of gravity than a conventional SUV. It resembles more of a crossover between an SUV and a coupe, similar to the BMW X6. One of its main external features is the falcon-wing doors at the rear. For practical reasons, Tesla uses distance sensors on the body to allow the falcon-wing doors to open automatically based on the distance on either side, enabling normal operation in spaces as narrow as 30 cm. 2. Model S: The Model S has a price range of 76.68–132.49 (currency not specified), a pure electric range of 502 km, and a charging time of about 10 hours. It does not qualify for national subsidies and can be considered a popular model in the market. The body dimensions are 4978*1964*1445 mm, with a wheelbase of 2960 mm. Its sports car-like appearance attracts a lot of attention. The interior design is very simple, with a 17-inch display on the center console that incorporates almost all buttons, making it not only attractive but also very easy to operate. This is the biggest highlight of the model. 3. Tesla Model 3: Externally, the Tesla Model 3 is essentially a scaled-down version of the Model S, with very similar lines and body proportions. The front of the Model 3 is fully integrated, eliminating the traditional grille. Classic elements like the hidden door handles are retained. The Model 3 has a body length of 4694 mm, which is 285 mm shorter than the Model S, but the wheelbase remains 2870 mm, only 90 mm shorter than the Model S, ensuring ample space inside the vehicle.
18
0
Share

What causes the ABS light to illuminate in a Skoda Fabia?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and calculating the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal function. Cause 2: Poor signal transmission due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Inspect the wiring connections and reconnect any loose parts. State 2: ABS warning light illuminates intermittently and turns off when accelerating. Cause: When multiple electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and voltage rises, the ABS indicator turns off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or inadequate grounding. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding connection in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS control unit failure. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR control unit. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light illuminates intermittently. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, depress the brake pedal and use a finger to push the brake switch linkage down fully, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving, as it indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
12
0
Share

Can people with myopia still obtain a driver's license?

People with myopia can obtain a driver's license. According to the regulations on the application and use of motor vehicle driver's licenses: 1. For applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving models, the naked eye or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart; 2. For applying for other driving models, the naked eye or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle recklessly may lead to traffic accidents. Generally, people cannot drive on the road without a license, but for those who already possess safe driving skills, the document that allows them to drive vehicles on the road is the driver's license.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.