···
Log in / Register

What are the 3 key points for parallel parking in Subject 2?

4 Answers
EliLynn
07/29/25 3:36pm
Subject 2 parallel parking involves the following 3 key points: 1. First point: Turn the steering wheel fully to the right when the horizontal yellow line in front of the right-side parking space is no longer visible in the right rearview mirror. 2. Second point: Straighten the steering wheel when the right rear corner of the parking space appears in the left rearview mirror. 3. Third point: Turn the steering wheel fully to the left when the left rear wheel just touches the white dashed line in the left rearview mirror. Important notes for Subject 2 exam: 1. Note 1: Ensure no facial coverings such as scarves, masks, or hats during photo-taking. 2. Note 2: Present ID card when entering the vehicle, adjust the seat, turn on the left turn signal, fasten the seatbelt, release the handbrake, and only enter the exam area after hearing "Identity verification successful." 3. Note 3: If another vehicle is currently performing reverse parking, wait outside the arrow markers until the preceding vehicle begins parallel parking before starting your exam. 4. Note 4: Align with the reference point ahead during parallel parking, avoid crossing solid lines on both sides, and maintain a 20-50 cm distance between the right wheel and the parking space line.
Was this review help?
17
2
Share
StSienna
08/14/25 9:21am
I've been driving for over a decade, and parallel parking mainly relies on three key points. Point one is when you park your car parallel to the space in front and see the rearview mirror aligned with the parking line, start reversing slowly. Point two is when you feel the rear wheel approaching the corner of the parking space during reversing, immediately turn the steering wheel fully towards the space. Point three is when the car body is almost parallel to the parking space, quickly straighten the steering wheel to adjust the position. Practice is really important; finding these points during the test will help you park smoothly. In real life, parking also depends on these three points—don’t rush, slower speed is easier to control. If you miss a point, the car can easily scrape the curb or go over the line. Safety first, so I recommend new drivers practice dozens of times in an open area to master it through repetition.
Was this review help?
5
4
Share
Expand All
RubyLynn
10/12/25 2:49am
I remember when I was taking the Subject 2 test, three key points for parallel parking were crucial! Point one: when the car is parallel to the parking space, start reversing as soon as the rearview mirror aligns with the line. Point two: after reversing for just a few seconds, as soon as the rear wheel touches the corner of the parking space, immediately turn the steering wheel all the way to the right. Point three: when the car body is almost parallel to the parking space, straighten the wheel in time and make slight adjustments. The whole process needs to be smooth—no hesitation. I passed the test by relying on these three points, practicing countless times to get used to it. Actually, daily driving uses a similar method, but the test center is strict—the points must be precise. It's best to practice with a standard parking space and simulate the scenario multiple times.
Was this review help?
15
1
Share
Expand All
ChloeMarie
11/25/25 3:52am
When practicing parallel parking, there are typically three key reference points to master. Point one is the accurate starting position: align the car parallel to the parking space, observe the horizontal line of the parking space in the rearview mirror, and slowly reverse. Point two: during reversing, when the rear wheel aligns with the corner of the parking space, quickly turn the steering wheel to full lock to cut in. Point three: when the car body is straightened and parallel, fine-tune the direction to park. Note that the operation should be smooth, and slower speed is preferable; common mistakes such as misjudging the position or not straightening in time can cause the car body to skew out of line. Safety is paramount, so practice more before the test to familiarize yourself with the points.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Where to Check Vehicle Emission Standards?

Vehicle emission standards can be checked through the VIN code. The locations of the VIN code are: 1. Left side of the dashboard; 2. Lower left side of the windshield; 3. On the vehicle's nameplate; 4. On the body above the right front shock absorber; 5. In the trunk area; 6. On the door hinge pillar, door lock pillar, or one of the door edges connected to the lock pillar. The VIN code refers to the Vehicle Identification Number, consisting of 17 characters, which includes the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. The functions of the VIN code are: 1. To confirm the vehicle's identity; 2. For traffic violation inquiries; 3. To check the vehicle's batch; 4. For precise parts lookup.
17
4
Share

What are the causes of spark plug damage?

The causes of spark plug damage are: 1. Spark plug ceramic insulator cracking; 2. Carbon buildup in the gap; 3. Electrode erosion; 4. Electrode melting. Precautions for removing spark plugs: 1. Clean any debris from the spark plug; 2. Ensure the engine is in a cold state before proceeding; 3. Protect the spark plug installation port after removal to avoid damaging the insulating ceramic; 4. When adjusting the spark plug gap, avoid touching the center electrode. The working principle of a spark plug is: Under the control of the engine, it introduces the high-voltage electricity generated by the ignition coil into the engine cylinder, creating a spark between the spark plug electrode gaps to ignite the air-fuel mixture, enabling the engine to operate normally.
9
3
Share

Where to Place the Vehicle Inspection Sticker?

Vehicle inspection stickers should be affixed to the upper right corner of the front windshield. The vehicle inspection sticker is a certification issued by the vehicle management office after the vehicle passes the periodic safety technical inspection required by national regulations, proving its safety performance. To obtain the vehicle inspection sticker, you need to bring the vehicle registration certificate, compulsory traffic insurance, and ID card to the vehicle management office or traffic police station to receive the annual inspection sticker for free. Methods to obtain the electronic version of the vehicle inspection sticker: 1. Log in to the official traffic management website; 2. Click on the option to apply for the inspection sticker for exempt vehicles; 3. Select the vehicle for which you want to obtain the sticker; 4. Fill in the application information to receive the electronic certificate.
16
4
Share

What are the differences between the Maserati Ghibli and Quattroporte?

The differences between the Maserati Ghibli and Quattroporte are: 1. Different power: The Maserati Ghibli has a maximum horsepower of 330ps, a maximum power of 243kw, and a maximum torque of 450nm; the Quattroporte has a maximum horsepower of 350ps, a maximum power of 257kw, and a maximum torque of 500nm. 2. Different tire models: The Maserati Ghibli tire model is 235/50r18; the Quattroporte tire model is 245/45r19. 3. Different body dimensions: The Maserati Ghibli has a body length, width, and height of 4974mm, 1945mm, and 1484mm respectively, with a wheelbase of 2998mm; the Quattroporte has a body length, width, and height of 5262mm, 1948mm, and 1481mm respectively, with a wheelbase of 3171mm.
5
5
Share

What is the installation method for motor vehicle license plates?

Motor vehicle license plate installation method is: 1. Take out the screws of the license plate and rotate them to insert them into the anti-theft caps; 2. Align the license plate in the correct position, match the screws with the gaps on the bumper, and secure them with tools; 3. Cover the anti-theft caps and press them into place. The functions of the license plate are: 1. Identification mark of the vehicle; 2. Indicates the region to which the vehicle belongs; 3. The vehicle owner and registration information can be traced based on the license plate. The composition of the license plate is: 1. Chinese characters, which are the abbreviation of the province where the vehicle is registered; 2. English letters, representing the prefecture-level code of the vehicle's location; 3. Sequential numbers.
14
4
Share

How to Open the Trunk Manually?

The method to manually open the trunk is: 1. Locate the trunk keyhole on the car; 2. Take out the trunk key; 3. Insert the key into the trunk keyhole and turn it to the right to open the trunk. The trunk, also known as the luggage compartment, measures a car's ability to carry luggage or spare items. Trunk volume is categorized into single volume and dynamic volume. Single volume refers to the commonly used data for general sedans, indicating the trunk capacity without folding down the rear seats. Dynamic volume applies to some convertible models, representing the trunk volume when the roof is either open or closed.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.