···
Log in / Register

What are the 2021 Subject 2 Evaluation Criteria and Deduction Points?

4 Answers
VonIsabel
09/06/25 7:01am

2021 Subject 2 Evaluation Criteria and Deduction Points: 1. Fixed-point parking and slope starting: No fixed-point parking, deduct 100 points; After the vehicle stops, the front bumper does not reach the control line, deduct 100 points; After parking, the vehicle rolls back more than 30 cm, deduct 100 points; After parking, the vehicle rolls back less than 30 cm, deduct 10 points; Starting without turning on the left turn signal, deduct 10 points; The vehicle runs over the solid edge line of the road, deduct 100 points; After the vehicle stops, the front bumper does not reach the parking line, deduct 10 points; Starting time exceeds 30 seconds, deduct 100 points. 2. Parallel parking: After the vehicle is parked in the garage, the body crosses the line, deduct 100 points; The wheels touch or press the lane boundary line while driving, deduct 10 points; Not parked in the garage, deduct 100 points; Starting without turning on the left turn signal, deduct 10 points; Reversing without turning on the right turn signal, deduct 10 points; Stopping midway, deduct 100 points. 3. Curve driving: Any wheel presses the edge line of the road, deduct 100 points; Stopping midway, deduct 100 points. 4. Right-angle turn: Any wheel presses the edge line of the road, deduct 100 points; Stopping midway, deduct 100 points. 5. Reverse parking into garage: Not driving in the prescribed route sequence, deduct 100 points; Not completely reversed into the garage, deduct 100 points; The body crosses the line, deduct 100 points; Stopping midway, deduct 100 points.

Was this review help?
12
5
Share
RafaelRose
09/18/25 6:41am

I think the driving test's Subject 2 in 2021 was quite particular. When I took it, I had to pay special attention to the points where deductions could occur, otherwise it was easy to fail. Generally, the test includes reversing into a garage, parallel parking, hill starts, etc., with a full score of 100 points, and you need at least 80 points to pass. The major deductions come from the vehicle body crossing or touching the lines—just one touch and you lose 100 points immediately, like if the wheels touch the lines during reversing or turning. Stopping midway is also disastrous; if you stop for more than 2 seconds during movement, you lose 100 points, or if you exceed 30 seconds without completing parallel parking, it's another 100-point deduction. On the hill start, be careful—stalling once costs 10 points, and starting more than 50 cm from the designated spot costs 100 points, while less than 30 cm is fine, but anything beyond that is risky. Also, forgetting to signal or fasten the seatbelt can easily cost you points, with 5 points deducted for each mistake. I recommend practicing hill starts more, finding a quiet spot to simulate the test, not rushing through it, and keeping a steady mindset to truly master it.

Was this review help?
10
3
Share
Expand All
SaraAnn
11/01/25 7:08am

The scoring criteria for Subject 2 remained largely unchanged in 2021. Let me highlight the key points from a deduction perspective. The test is scored out of 100, with a passing mark of 80. The most error-prone sections are reverse parking and parallel parking: if the vehicle body crosses the line or the wheels touch the line, it’s an immediate 100-point deduction, and failing to park properly also results in a full deduction. Stopping for more than two seconds mid-process deducts 100 points. Hill starts require precision—rolling back over 30 cm after starting deducts 100 points, and stalling deducts 10 points. Right-angle turns and curve driving are also strict; touching the line means failure. Don’t overlook basic actions, like not wearing a seatbelt (5-point deduction) or failing to signal (5-point deduction each time). For preparation, I recommend using a simulator to practice reverse parking, familiarize yourself with the sequence, and stay focused during the test. These details are practical for everyday driving too, like stalling during starts, which directly impacts safety.

Was this review help?
1
3
Share
Expand All
MayaDella
12/15/25 7:16am

In 2021, I clearly understood the driving test's Subject 2, where the evaluation criteria are simply not to make mistakes in each item. Hitting the line during reverse parking results in a 100-point deduction, and failing to enter the parking space also deducts 100 points. Exceeding the time limit for parallel parking deducts 100 points, and touching the line similarly results in a full deduction. Incorrect positioning on the slope start deducts 10 points, stalling during start-up deducts 10 points, and rolling back excessively deducts 100 points. Hitting the line during turning or curve driving deducts 100 points. Basic mistakes like forgetting to signal deduct 5 points, and not wearing a seatbelt also deducts 5 points. In short, each item is scored independently, and making too many mistakes leads to an immediate fail. During practice, pay more attention to the wheel positions, stay calm during the test without dragging, and passing with 80 points is sufficient.

Was this review help?
19
4
Share
Expand All
More Forum Discussions

Does a black car absorbing heat in summer cause damage to the car?

A black car absorbing heat in summer does not cause excessive damage to the car, but it is advisable to park in the shade as much as possible to better protect the car's engine. Below is more information about car engines: 1. Introduction: An engine (Engine) is a machine that can convert other forms of energy into mechanical energy. The engine can be used as a power generation device or refer to the entire machine including the power device (such as a gasoline engine or an aircraft engine). 2. Classification: Engines include internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Among them, the valve drive mechanism adopts a hydraulic support roller rocker structure. Compared with the hydraulic tappet valve drive mechanism commonly used in gasoline engines today, this novel valve drive mechanism has the advantage of relatively small friction torque, thus requiring less driving force, which can effectively reduce engine power consumption and fuel consumption.
3
0
Share

What to Do About Chassis Abnormal Noises?

Solutions for chassis abnormal noises are as follows: 1. Interference between components: Repair or replace related components to eliminate interference. 2. Loose bolts or nuts: Insufficient tightening torque or incorrect bolt specifications. Causes of chassis abnormal noises are as follows: 1. Noise from disc brakes: The disc brake shoes are installed on the brake cylinder support frame, with anti-noise pads on the back of both shoes, friction shoe support plates or support springs on the sides, and vibration damping spring plates or guide plates at the top and bottom. 2. Noise from front suspension ball joints: Small vehicles use various types of front suspension, including longitudinal leaf springs, transverse leaf springs, torsion bar springs, or coil springs.
20
1
Share

Can the car battery still be used if the car is not driven for three months?

It is very likely that the battery is already dead. Leaving a car unused for a long time can have adverse effects on its health. Generally, the following impacts may occur: 1. Tire deformation: When the vehicle is started again, a noticeable rolling impact may be felt because the part of the tire that has been pressed against the ground for a long time has flattened and will take some time to regain its shape. 2. Significant self-discharge loss of the battery: When self-discharge reaches a certain level, the battery will be undercharged, leading to sulfation of the battery plates and shortening its lifespan. Therefore, even if the vehicle is not used for a long time, it is best to start it once a week and charge the battery for a while, which is beneficial for the vehicle's health.
5
0
Share

Does having one new and one old rear tire have any impact?

Having one new and one old rear tire can have a certain impact on the stability of the vehicle. Below is more information about car tires: 1. Numerical meanings: The tire data indicates the tire section width, aspect ratio, and wheel diameter in inches. For example, for a tire with the specification 275/45/R18, 275 represents the tire section width, 45 is the aspect ratio, R stands for radial construction, and 18 is the wheel diameter in inches. 2. Function: The vehicle's tires can reduce and absorb the vibrations and impact forces during driving, preventing the car's components from being damaged by severe vibrations.
1
0
Share

Is Driving on Highways or National Roads More Fuel-Consuming?

Driving on national roads consumes more fuel than driving on highways. Here are the specific details regarding vehicle fuel consumption: 1. Highways: Highways are generally "straighter," which means compared to national roads, the distance traveled on highways is shorter, naturally reducing the vehicle's fuel consumption. 2. National Roads: The main cost of driving on national roads lies in fuel consumption. Firstly, national roads are more congested. Once stuck in traffic, frequent braking and acceleration are unavoidable, leading to a sharp increase in fuel consumption. If encountering areas with dense traffic lights, fuel consumption will inevitably spike. National roads are usually more winding, which inadvertently increases the vehicle's travel distance, also resulting in higher fuel consumption. 3. Speed: The maximum speed limit on highways is 120 km/h. If the average speed is 100 km/h, a 100-kilometer journey takes one hour. The speed limits on national roads are completely different from highways, typically around 60-70 km/h, and in some areas with poor road conditions, the limit may be as low as 40 km/h. Due to the complex road surfaces in many parts of national roads, speeds are not very fast. If the average speed is 50 km/h, then a 100-kilometer journey would take two hours.
6
1
Share

Can the replaced headlights be different from the original ones?

Replaced headlights that are not the same as the original ones cannot be installed. Here is more information about car headlights: 1. Function: The function of car headlights is to provide illumination for nighttime driving. Car headlights are also known as car front headlights or car LED daytime running lights. As the 'eyes' of the car, they not only relate to the external image of the car owner but are also closely linked to safe driving at night or in bad weather conditions. 2. Types: (1) By purpose: Car lights can be divided into two categories based on their purpose: illumination and auxiliary. Among them, only the front headlights and some fog lights equipped on certain cars serve the purpose of illumination, while the rest are auxiliary lights. (2) By type: Currently, there are four types of car headlights. They are laser headlights, LED car headlights, xenon headlights, and halogen lights.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.