What are the 100-point answering techniques for Subject 4?

1 Answers
DeDavid
07/30/25 4:32am
Subject 4 answering techniques for 100 points include the priority principle, light usage methods, correct answers, and observation questions. Priority principle: Turning vehicles yield to straight-moving vehicles, vehicles from the right have priority, right-turning vehicles yield to left-turning vehicles, safe vehicles yield to dangerous ones, and unobstructed vehicles have priority. Light usage methods: All instances of turning on high beams are wrong, all instances of using hazard warning lights are correct, turn on the left turn signal when entering a highway, turn on the right turn signal when exiting a highway, do not use turn signals when entering a roundabout, and turn on the right turn signal when exiting a roundabout. Correct answers: Intermittent light braking, ensuring safety, guaranteeing safety, safe passage by letting others go first, yielding by slowing down, yielding by stopping, courteous yielding, and slowing down to avoid. Observation questions: Advance observation, careful observation, thorough observation, and looking around.
Was this review help?
6
3
Share
More Forum Discussions

At what tire pressure should you not drive?

Tire pressure below 1.7 bar is unsafe for driving. The normal tire pressure for most passenger cars typically ranges between 2.1 and 2.8 bar. Insufficient pressure increases tire body deformation, leading to cracks on the sidewalls and causing flexing movements that generate excessive heat. This accelerates rubber aging, fatigue in the cord ply, and breakage of the cords, while also enlarging the tire's contact area and accelerating shoulder wear. Precautions for inflating tires: 1. Ensure safety during inflation by regularly checking pressure with a gauge to avoid overinflation and tire bursts; 2. Allow tires to cool down after driving before inflating, as driving increases tire temperature and affects pressure; 3. Inspect the valve stem—if the valve stem and core are uneven, protruding, recessed, or have other defects, it may hinder inflation and pressure measurement; 4. Maintain cleanliness during inflation; the air used must not contain moisture or oil to prevent deterioration and damage to the inner tube rubber.
14
3
Share

Where is the tire pressure monitoring set button located?

The tire pressure monitoring set button is generally located on the center console. Turn on the ignition switch, press and hold the tire pressure monitoring reset button (set button), release it after hearing the prompt tone, and the tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally the dashboard warning light will turn off, completing the tire pressure reset. Tire pressure monitoring automatically monitors tire pressure in real-time while driving and alerts the driver to tire leaks and low pressure to ensure driving safety. Generally, if the tire pressure is below 1.8 bar or above 3.0 bar, the tire pressure monitoring system will issue an alert. It is necessary to promptly check the tires and adjust the pressure. After inflating the tires, it is essential to perform a tire pressure reset promptly; otherwise, the tire pressure monitoring system will still record the original data, and the tire pressure monitoring indicator light will remain on.
15
0
Share

What is the reason for the abnormal noise when braking while reversing in the City?

The reasons for the abnormal noise when braking while reversing in the City: noise from the ABS braking system, foreign objects mixed in the braking system, abnormal operation of the brake caliper, excessive wear of the brake pads, and other factors. Among these, the most common causes are foreign objects mixed in the braking system or excessive wear of the brake pads. It is recommended that the owner visit a 4S shop as soon as possible to identify the cause. The City 2019 1.5L Manual Base model is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 131, a maximum power of 96 kilowatts, a maximum power speed of 6,600 rpm, a maximum torque of 155 Nm, and a maximum torque speed of 4,600 rpm.
14
0
Share

How Many Turns to Lock the Steering Wheel?

Generally, it takes about two to two and a half turns to fully lock the steering wheel. Turning the steering wheel to its maximum limit in either the counterclockwise or clockwise direction is referred to as 'locking the steering wheel.' This technique is used in cars and other vehicles for short-distance maneuvers, allowing the vehicle to complete significant turns with minimal movement. However, fully locking the steering wheel during a turn can increase the power steering pump's pressure several times or even more, and consistently doing so may shorten the pump's lifespan. Therefore, it's advisable not to continuously lock the steering wheel. The correct way to hold the steering wheel is to place the left hand near the 9 o'clock position and the right hand near the 3 o'clock position. This grip ensures convenience and accuracy when turning the wheel. Additionally, it's important to control the steering wheel with appropriate force, keeping the thumbs naturally placed on the wheel.
14
0
Share

What to Do When Side Windows Get Blurry on Rainy Days?

Solutions for blurry side windows on rainy days: 1. Use a specialized waterproof spray by applying it to the side windows. Waterproof sprays come in two types: spray-on and wipe-on, both of which can effectively prevent side window blurring. 2. Install rain deflectors on the side windows. Rain deflectors can effectively keep the rearview mirrors clean and prevent rainwater from hitting the side windows. Car glass is manufactured by heating the glass in a furnace to near its softening temperature, then quickly transferring it to air grids with varying cooling intensities for uneven cooling. This process creates different stresses between the main viewing area and the peripheral areas of the glass, resulting in a type of glass known as zone-tempered glass.
18
4
Share

Where is the coolant temperature sensor located on a Jetta?

The coolant temperature sensor on a Jetta is positioned at the rear side of the engine, near the water pump. The coolant temperature sensor is a device that converts the temperature of the coolant into an electrical signal, which is then used to adjust the corresponding control unit. If the coolant temperature sensor malfunctions, the most obvious symptom is that the temperature gauge needle stops moving or remains fixed at the highest position. If such symptoms are observed, it is likely that the coolant temperature sensor has failed and requires immediate repair or replacement. The new Jetta lineup includes 9 models with three engine options: 1.4L, 1.5L, and 1.4TSI, paired with either a 5-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission. These models are equipped with Volkswagen's latest EA211 series engines. The dimensions of the car are 4501mm in length, 1704mm in width, 1469mm in height, with a wheelbase of 2604mm.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.