What Are Some Tips for Repairing Dents in Car Wheel Arches?

2 Answers
LaCollin
07/29/25 8:10am
Here are some tips for repairing dents in car wheel arches: 1. Prepare the necessary tools, including various lever tools, professional lighting, a repair hammer, and a specialized leveling pen. For car dent repair, the most important factor is not the tools but the technician's skill, attention to detail, and patience. 2. Perform the car dent repair. Use the visual effect of light refraction to determine the position and extent of the dent. Apply the lever principle to massage the inner "skin" of the car body, gradually releasing the tension in the dented area. This maximizes the "entropy" value on the surface of the dent, restoring it to its original shape and achieving a fast, accurate, and complete repair. 3. Inspect the repair results. Check under lighting or sunlight—if no flaws are visible, the repair is successful. Additional Information: 1. The wheel arch, short for car wheel arch, refers to the chrome-plated bright strip along the upper edge of the tire, which is a semi-circular component protruding from the fender above the car tire. It consists of 1/2 steel and 1/2 plastic, the same for both front and rear wheels. 2. The primary function of the wheel arch is decorative, catering to the driver's personalized needs. Additionally, from an aerodynamic perspective, the wheel arch is designed to comply with fluid dynamics, reducing the drag coefficient.
Was this review help?
12
3
Share
DiJeremiah
08/13/25 4:09am
My car has been driven for a long time, and I’ve encountered wheel arch dents a few times. Here are some tips. Plastic wheel arches are the most common—pour hot water over them to soften the material, but avoid water that’s too hot to prevent deformation, then gently push it back into place with your hands or a suction cup while it’s still warm. Wear gloves for safety during the process. Buying a dedicated suction cup tool is more convenient; you can find them on Taobao for just a few dozen yuan—slowly pull and suction to reset it. Metal wheel arches are trickier—don’t attempt DIY repairs to avoid scratching the paint, and honestly, just take it to a professional shop for fixing. After repair, apply some car wax for protection to reduce aging risks. When driving, pay attention to turning angles, and park farther away from obstacles for better prevention. Last time, I successfully fixed it with the hot water method, saving over 500 yuan in repair costs—felt totally worth it.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What Gear Should You Use When Driving a Manual Transmission Car Downhill?

Manual transmission downhill gear selection depends on specific conditions: 1. For general slopes, use 2nd gear; 2. For steep slopes exceeding 30 degrees, use 3rd gear; 3. When ascending/descending elevated roads, use 4th or 5th gear. The method for starting a manual transmission car downhill is: 1. Depress clutch and brake, shift gear lever to neutral; 2. Depress clutch and brake, turn key right to first position for vehicle self-check; 3. Turn key right to ignite; 4. After engine starts, engage 1st gear; 5. Slowly release clutch and brake, when noticeable vehicle vibration occurs, slightly release brake to start. Precautions for manual transmission downhill driving: 1. Never coast in neutral; 2. Avoid unnecessary clutch depression; 3. Do not make sudden steering wheel movements.
15
3
Share

How to Exit the Buick Radio?

To exit the Buick radio, press the button in the center of the volume control located below the center console. Taking the Buick Excelle GT 1.3T as an example, it is a compact 4-door, 5-seater sedan with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, and a wheelbase of 2640mm. The Buick Excelle GT 1.3T is equipped with a 1.3T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 120 kW and a maximum torque of 230 Nm. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using multi-link independent suspension.
1
0
Share

What does 84h tire mean?

84h tire refers to the load index and speed rating of the tire, where 84 indicates the load index, meaning the tire can bear a weight of 500 kilograms; h indicates the speed rating, meaning the tire can handle speeds up to 210 kilometers per hour. The functions of a tire are: 1. To bear the weight of the vehicle; 2. To ensure good adhesion between the wheel and the road surface; 3. To improve the vehicle's traction, braking, and off-road capability; 4. To directly contact the road surface and work with the vehicle's suspension to cushion the impact during driving, ensuring good ride comfort and smooth driving. The maintenance methods for tires include: 1. Regularly removing debris from the tread grooves; 2. Checking the tire wear and replacing them in time; 3. Regularly checking the tire pressure; 4. Promptly repairing punctures.
5
4
Share

Why Does the BMW 5 Series Have Chassis Noises?

Generally, the causes of chassis noises can be categorized as follows: 1. Interference Between Components Possible Cause: Due to impacts or the installation of additional equipment, two components may interfere with each other. Solution: Only reshaping, repairing, or replacing the relevant components can eliminate the interference. 2. Loose Bolts or Nuts Possible Causes: A. Long-term driving on poor road conditions causing natural loosening of bolts; B. Improper disassembly or installation damaging the bolts; C. Insufficient tightening torque or incorrect bolt specifications. Solution: Tighten or replace the bolts and nuts. 3. Driveshaft Universal Joint Failure Possible Cause: Caused by a broken dust cover or oil leakage not being repaired in time. Solution: Replace the driveshaft universal joint. 4. Noises from Ball Joints, Suspension, or Mounting Brackets Possible Cause: Long-term use leading to loose ball joints or aging and cracking of rubber bushings. Solution: Replace the ball joints or bushings. 5. Brake System Noises Possible Causes: A. Loose brake pads, calipers, or brackets; B. Faulty brake pads or rotors. Solution: Check the brake system for looseness and inspect the brake pads and rotors for abnormal wear. 6. Wheel Hub Bearing Noises Occur at certain speeds, producing a "humming" sound that increases with speed. Possible Cause: Mostly caused by burnt wheel hub bearings. Solution: Replace the wheel hub bearings (recommended to replace both sides simultaneously). 7. Tire Noises Possible Causes: A. Tire issues; B. Abnormal tire wear. Solution: Check for abnormal tire wear. If present, inspect the chassis for looseness or improper assembly. If not, the issue lies with the tire itself. 8. Transmission Noises Possible Cause: Internal gear wear or insufficient lubrication. Solution: First, check if the transmission fluid is sufficient. If no external issues are found, disassembly and inspection may be necessary. 9. Clutch Noises Usually occur when the clutch pedal is depressed. Possible Cause: Caused by insufficient lubrication or wear of the release bearing. Solution: Replace the release bearing to eliminate the noise.
19
2
Share

What is the appropriate tire pressure for a Transit?

The normal tire pressure range for a Transit vehicle is between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. If you want to check the current tire pressure of your Transit during daily driving, you can activate the tire pressure monitoring system, and the tire pressure values will be displayed on the central LCD screen of the dashboard. The specific method is to start the vehicle's power, press the menu button, switch to the vehicle information menu, rotate the knob at the top of the left lever to the tire pressure monitoring information, and you can see the tire pressure of all four wheels. Generally, a tire pressure above 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern of the tire, shortening tire lifespan; increasing vehicle vibration, indirectly affecting the lifespan of other components; causing excessive stretching and deformation of tire cords, reducing tire elasticity, and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and potential deviation, which are unfavorable for driving safety; increasing movement in various parts of the tire, leading to abnormal heat due to excessive rolling; reducing the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, resulting in damage to the bead area and abnormal wear; exponentially increasing friction between the tire and the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply reset the tire pressure in this case. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged during driving, such as by hitting a curb, the tire pressure warning light will also come on. For sensor damage issues, the only solution is to replace it with a new part.
5
4
Share

Where is the cigarette lighter fuse located in a Toyota Corolla?

Toyota Corolla's cigarette lighter fuse is located inside the storage compartment on the left side of the steering wheel. It is a compact 4-door, 5-seater sedan with body dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 50 liters. The Toyota Corolla is equipped with a 1.2T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 85 kW with a maximum power speed range of 5200 to 5600 rpm. It features front-wheel drive, a front MacPherson strut independent suspension, and a rear E-type multi-link independent suspension.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.