···
Log in / Register

What Are Some Tips for Driving Test Subject 2?

3 Answers
VonJoel
07/29/25 10:19am
Tips for Driving Test Subject 2 involve practicing more to master the skills. Below are more details on the tips for Driving Test Subject 2: 1. Keep the speed slow. Ensure the car doesn’t stop, but try to drive as slowly as possible. The slower, the better, as it allows more time for adjustments. 2. Adjust the rearview mirrors properly. After getting in the car, make sure to adjust the rearview mirrors correctly, which is especially important for reversing into the garage and parallel parking. Generally, the rearview mirrors should be positioned lower than usual, with the rear door handle close to the top edge of the mirror to see the ground markings clearly. 3. Master the three-point alignment method. The three points refer to the driver’s eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it’s crucial to identify these points accurately and observe them properly to ensure precision. 4. Pay attention to the four corners of the car. The front corner is prone to touching the outer line when reversing into the garage, while the rear corner may touch the side lines of the parking space. The front corner can easily go out of line during curve driving. The front corner may also go out of line during a right-angle turn. In parallel parking, the front corner might touch the outer line or the left front corner of the parking space, while the right rear corner may touch the right parking line. Therefore, always be mindful of the four corners and the outer lines. 5. Understand the key points of each project. (1) For reversing into the garage, the key point is knowing how to correct the direction if entering too early. (2) For parallel parking, the key point is the third steering action—right-left-left—specifically, the final left turn should be based on a certain reference point inside the car. (3) For hill start and stop, the key point is preventing the engine from stalling. (4) For curve driving, the key point is avoiding contact with the inner protruding areas of the curve by combining reference points for steering with fine adjustments. (5) For right-angle turns, the key point is maintaining the correct distance from the outer line before turning—neither too wide nor too narrow, and ensuring the car is straight.
Was this review help?
11
0
Share
OCody
08/13/25 1:57pm
When taking the driving test for Subject 2, I found some small tricks quite useful. For reversing into the parking space, it's essential to find fixed reference points, such as aligning the yellow line on the ground in the rearview mirror before turning. Speed control is crucial—take it slow and steady, and hold the clutch at the semi-engaged point when you feel the car vibrate. For parallel parking, pay attention to the timing of steering; turn the wheel immediately when you see the pole without hesitation. Don’t be afraid of stalling on the slope start—first engage the handbrake, then release the clutch to the semi-engaged point, and only release the handbrake after the car starts moving. For the S-curve, use the rearview mirror to check the distance between the tires and the line; touching the line is a no-go. Practice more at the driving school to get familiar with the car’s feel, relax and get a good night’s sleep before the test, and walk around the test site beforehand to boost confidence. These little tips helped me pass the first test smoothly—it felt amazing and was definitely worth the time to master the details.
Was this review help?
3
4
Share
Expand All
LeMary
10/07/25 4:22am
After several attempts at Subject 2, I've summarized some practical tips. Adjusting the seat and mirrors correctly is crucial—otherwise, the reference points won't be accurate. For parking tasks, fine-tune the mirror angle to ensure a clear view of the ground. During reverse parking, the timing of fully turning the steering wheel is key—act when the rear wheels align with the line. The clutch is the core; press it gently to find the semi-engaged state and maintain balance with slight front-end vibration. For hill starts, coordinate the clutch and brake: pull the handbrake first before releasing the clutch until you feel the power engage. Maintain a steady speed during right-angle turns and avoid sharp steering. Frequently check the mirrors and use them to avoid crossing lines. Recording practice sessions or having a friend observe can help correct mistakes. Practice makes perfect—mastering these basics through repetition yields surprisingly good results in the test.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the 2011 Regal 2.0L?

2011 Regal 2.0L model has a combined fuel consumption of 10.9L/100km. The following are the details of the 2011 Regal 2.0L: 1. Body dimensions: The 2011 Regal 2.0L measures 4830mm in length, 1856mm in width, and 1484mm in height, with a wheelbase of 2737mm. 2. Powertrain: The 2011 Regal 2.0L is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 147Ps, a maximum power of 108KW, and a maximum torque of 190N·M; it is paired with a 6-speed automatic transmission.
11
3
Share

Why won't the electric car move even though it has power?

Here are the reasons why an electric car has power but cannot move: 1. Controller damage: If the controller of the electric car is damaged, it can cause the wheels to not rotate even when there is power. 2. Motor failure: If the motor of the electric car malfunctions, such as poor contact of the motor carbon brushes, it can also result in the car not moving despite having power. Additionally, damage to the motor Hall sensor can cause the same issue. 3. Throttle issue: Problems with the throttle of the electric car, such as using a wire to short the throttle's positive and signal lines—if the car moves, it proves the throttle is faulty. A faulty throttle can also prevent the electric car from moving even when it has power.
6
5
Share

Does the BYD Tang DMI need to be charged?

BYD Tang DMI needs to be charged. The differences between BYD Tang DMI and Tang DM are as follows: 1. Power system: Tang DM is equipped with a 2.0T + plug-in hybrid, while Tang DMI is equipped with a 1.5 plug-in hybrid. 2. Motor: All DMI models feature a front-mounted single motor, available in two versions: 145kw and 160kw. In contrast, DM models include a rear-mounted single motor version with 180kw, as well as two dual-motor models with front + rear (250kw + 180kw) configurations. Therefore, all DM models are four-wheel drive, with two capable of full electric four-wheel drive, while DMI models are all two-wheel drive. 3. Pure electric range: DM offers 81 kilometers and 100 kilometers, while DMI provides 52 kilometers and 112 kilometers. On the surface, the differences seem minor, but in reality, their batteries are completely different. DM still uses ternary lithium batteries, whereas DMI employs BYD's latest lithium iron phosphate blade battery.
9
1
Share

What happens if you turn off the engine without turning off the air conditioner first?

Turning off the engine without turning off the air conditioner first will not cause any damage to the vehicle. Here is the relevant information: 1. Composition of the car air conditioning system: The car air conditioning system is basically composed of an air conditioning compressor, high-pressure pipes (some high-pressure pipes are equipped with a liquid-gas separator), a condenser, a dryer, a high-pressure sensor, an expansion valve, an evaporator, low-pressure pipes, compressor oil, and refrigerant. 2. Working principle: When the ignition switch is turned off, the engine will stop quickly, and the compressor will also stop working at the same time. The pressure difference of the refrigerant in the high and low pressure pipes will gradually equalize, and the entire air conditioning system will enter a balanced and static state. Therefore, there is absolutely no impact on the air conditioning system itself.
9
1
Share

What to Do If the Driver's License Exam Expires? Can I Get a Refund?

Whether a refund is possible for an expired driver's license exam depends on the following situations: 1. Enrolled in a driving school but did not take any exams: In this case, there is actually no "three-year expiration" rule, as the three-year validity period only starts after passing the subject one exam and the vehicle management office issues a learning driving certificate. Therefore, if the driving school fails to arrange subject two training for the student within 60 days after completing subject one training and the exam due to the driving school's reasons, the driving school should provide a full refund. 2. Passed subject one but the remaining subjects expired before completion: If some subjects have been passed but the remaining subjects were not completed within the three-year validity period, the driving school may refund a portion of the training fee. If the three-year period was exceeded entirely due to the student's personal reasons, the driving school may not provide a refund. 3. Priority scheduling for exams nearing expiration: If the learning driving certificate has less than six months of validity remaining, the student can switch to priority scheduling when booking exams. Note that each subject can be prioritized for scheduling once online. During priority scheduling, the student can choose exam sessions with available priority slots. As long as the booking request is successful and the student meets all other legal requirements for exam scheduling, the exam will be arranged.
9
4
Share

Can the issuing place of the driver's license be changed?

Yes, the issuing place of the driver's license can be changed. If you are transferring from another location to your local area, you can directly go to the local vehicle management office in your registered residence to complete the transfer procedures. Be sure to do this before the expiration date; otherwise, you will have to return to the original issuing place of the driver's license to handle it. Materials required for renewing a driver's license: A duly filled-out "Motor Vehicle Driver's License Application Form"; The original "Motor Vehicle Driver's Physical Condition Certificate" issued by a county-level or higher medical institution designated by the municipal health bureau; The original and a copy of the applicant's identity proof (if handled by an agent, the original and a copy of the agent's identity proof must also be submitted. Residents temporarily residing in the city must submit the residence or temporary residence certificate issued by the public security authority in addition to their ID card); The original driver's license; Three recent one-inch color front-facing half-length photos with a white background (without a hat). Notes for renewing a driver's license: The renewal can only be done in advance and cannot be postponed without a valid reason (if postponed for a reason, you must explain it to the traffic management department in advance). According to regulations, it can be done up to three months in advance. If the license is about to expire, it should be renewed as soon as possible. If postponed, a fine may be imposed.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.