What are some solutions to get rid of cockroaches in the car?

1 Answers
ORuth
07/30/25 9:49am
Thoroughly clean the interior of the car, as cockroaches find it difficult to survive in a clean environment. Place cockroach repellent in the car, preferably in hidden gaps and crevices. Spray prepared soapy water inside the car; cockroaches will flee upon smelling it. Place leftover orange or lemon peels in the car to repel cockroaches.
Was this review help?
17
0
Share
More Forum Discussions

How to Adjust the Date on a Dash Cam?

To adjust the date settings on a dash cam, follow these steps: 1. Press the menu button on the dash cam panel to enter the settings. 2. Select the time settings option. 3. Adjust the date and time, then press the menu button to return to the main interface. Additional benefits of installing a dash cam: After installation, a dash cam can record video and audio of the entire driving process, providing evidence in case of traffic accidents. For those who enjoy road trips, it can also be used to document the journey through challenging terrains. While driving, it continuously records videos, along with the time, speed, and location, functioning much like a black box.
18
1
Share

What to Do If Your Driver's License Has Expired for Three Months?

Here are the solutions for a driver's license that has expired for three months: 1. Solution One: If your driver's license has expired for three months or even half a year, you need to promptly replace it at the vehicle management office. 2. Solution Two: If it has expired for more than a year, you cannot replace it directly. At this point, the license is in a 'canceled but recoverable' status, and you will need to retake both the written test (Subject One) and the road test (Subject Three). 3. Solution Three: In more severe cases where the license has expired for three years or more, it will be forcibly canceled. The holder will then have to re-enroll in a driving school and retake all the necessary tests to obtain a new driver's license.
8
1
Share

What are the differences between SUVs and regular sedans?

Here are the differences between SUVs and regular sedans: 1. Different in visibility. Due to the high chassis and open design, SUVs have a better field of vision, while sedans have a relatively lower chassis, resulting in a smaller field of vision compared to SUVs. 2. Different in comfort. Sedans have longer seats than SUVs, and their design is more ergonomic, allowing people to relax and lean back, so SUVs are less comfortable than sedans. 3. Different in fuel consumption. With the same engine displacement, SUVs are relatively more fuel-consuming. SUVs are designed to be heavier and taller than regular sedans, and their aerodynamic drag coefficient is worse than that of sedans, so their fuel economy is slightly worse than that of regular sedans.
7
2
Share

Where to Process Shanghai Driver's License Renewal?

Shanghai driver's license renewal can be processed at the following locations: 1. Location 1: Zhongshan Hospital Affiliated to Fudan University (Hongkou Branch), 1st Floor, Physical Examination Building, No. 921 Tongxin Road, Hongkou District, Tel: 64882638. 2. Location 2: Zhongshan Hospital Affiliated to Fudan University (Jinshan Branch), Physical Examination Center, No. 2901 Caolang Road, Jinshan District, Tel: 64882638. 3. Location 3: Shanghai Chengkang Outpatient Department, 4th Floor, Building 3, No. 269 Tongxie Road, Changning District, Tel: 61070526. 4. Location 4: Shanghai Electric Power Hospital, 4th Floor, Physical Examination Department, No. 937 West Yan'an Road, Changning District, Tel: 64882638.
4
2
Share

What is the valve adjustment method for a six-cylinder diesel engine?

The valve adjustment method for a six-cylinder diesel engine is as follows: According to the firing order of 1, 5, 3, 6, 2, 4 for a six-cylinder engine, open the cylinder head cover, rotate the crankshaft, observe the movement of the valves in cylinder 6, and use the two-step adjustment method. Below are precautions for diesel engine usage: 1. New engine inspection: After installing a new engine, perform a pre-start inspection before initial operation. For every startup, remember that the diesel engine must be started without load. For new or overhauled diesel engines, a 60-hour break-in period is required before regular use. 2. Operation monitoring: During operation, continuously observe the engine's running condition and all gauge readings. In case of emergencies, take immediate shutdown measures to prevent engine seizure due to overheating from water shortage or loss of oil pressure.
17
4
Share

Is the Accord CVT a steel belt or chain?

The Accord CVT transmission adopts a steel belt design. Most vehicles with CVT structures use steel belts for power transmission. This method allows for changing the transmission ratio by adjusting the size of the pulleys. CVT transmissions have two types of power transmission methods: steel belts and chains. Steel belts are typically used for engines with lower torque, while chains are employed for high-torque engines. Therefore, performance-oriented CVT transmissions often use chains, such as the early Audi Multitronic CVT, Subaru Lineartronic CVT, and Nissan CVT8HT. The CVT steel belt consists of two embedded steel bands as the foundational support, with hundreds of steel plates attached to the metal belt. This push-plate structure transmits power through a "pushing" mechanism, where the hardness of the material between the plates generates thrust. The push plates exhibit minimal deformation under external forces. During power transmission, the driving pulley tightly presses against the entire side of the steel belt, creating static friction, which then drives the driven pulley to rotate. The CVT chain differs significantly in structure from the steel belt. The chain does not directly contact the pulleys but transmits torque by compressing the intermediate rocker pins. The chain structure comprises two sets of circular steel bands and tension plates, with each set consisting of 12 high-tension thin steel plates stacked together. Patent T702 high-strength steel inserts connect each set of plates via rocker pins, offering a tensile strength of up to 2000 MPa. This chain structure can only transmit power through a "pulling" mechanism, where the driving pulley compresses the chain's "rocker pins" to create static friction, thereby driving the chain to transmit torque.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.