···
Log in / Register

What are some car usage tips?

4 Answers
VonJosephine
09/09/25 2:33am

Here are some car usage tips: Do not start driving without warming up the car: After starting the car, do not rush to drive. Wait for 1-2 minutes before starting to drive, allowing the engine to have time for lubrication, especially for turbocharged engines, which require strict adherence to this practice. Avoid high-speed driving: During the break-in period of a new car, there are very strict requirements and standards for speed. Normally, the speed should be kept below 80 km/h and not exceed 100 km/h, with the tachometer reading controlled within 4,000 rpm. Do not change the oil prematurely: Changing the oil immediately after picking up the car can cause significant damage to the vehicle, as the factory-installed oil has good performance, low viscosity, and strong oxidation resistance, so it should not be replaced prematurely. Avoid emergency braking: Emergency braking, or sudden braking, can have a significant impact on the braking system during the break-in period and will increase the load on the car engine.

Was this review help?
10
5
Share
SilasFitz
09/20/25 7:32am

Having driven sedans for over a decade, I've learned some daily car tips that save fuel and hassle. When driving, I maintain a steady speed and avoid sudden acceleration or braking, which can reduce fuel consumption by over 10%. Setting the AC temperature around 26°C is ideal—not too low. Using recirculation mode cools the car faster and reduces engine load. Check tire pressure monthly; low pressure increases the risk of blowouts. Regularly clear heavy items from the trunk to lighten the load. Park in the shade or use sunshades to prevent overheating. When starting, press the accelerator gently for smooth acceleration; coast to decelerate before red lights. Plan routes to avoid traffic and use navigation apps to minimize idling time. These habits make the car last longer, and the annual fuel savings can cover an extra tire maintenance.

Was this review help?
14
0
Share
Expand All
NovaLynn
11/03/25 7:54am

I think the key to car maintenance tips is keeping the vehicle clean and regularly checking small details. After each use, I quickly wipe the interior to prevent dust buildup; every week, I clean the floor mats and clear out trunk clutter. Monthly, I check engine oil and coolant levels, topping up if needed; inspect wiper blade condition, and spray windshield washer fluid to clean the windshield. In summer, I prevent overheating by placing a small fan inside or cracking windows for ventilation; in winter, I let the engine warm up for a minute before turning on the heater. When parking, I avoid muddy areas to prevent underbody corrosion. For interior cleaning, I use pH-neutral cleaners to avoid harsh odors. These small habits make driving more comfortable and help the car stay like new for longer.

Was this review help?
18
3
Share
Expand All
AddysonLee
12/17/25 7:54am

As an environmentally conscious driver, my tips revolve around fuel efficiency and safety. I maintain a safe following distance and avoid sudden braking, keeping a steady speed within the limit. Fuel-saving techniques include avoiding peak-hour traffic to reduce idling in congestion, using natural ventilation instead of air conditioning whenever possible. For vehicle maintenance, I regularly change the air filter to prevent engine carbon buildup and check tire wear to ensure good traction. I also recycle used motor oil at professional stations to minimize pollution. Cultivating these habits not only saves fuel but also makes every journey more reassuring.

Was this review help?
19
1
Share
Expand All
More Forum Discussions

Do You Need to Press the Brake When Starting the Engine?

Both automatic and manual transmission vehicles require pressing the brake when starting the engine. For automatic transmission vehicles, it is impossible to start the engine without pressing the brake. Here are the reasons why pressing the brake is necessary when starting the engine: Preventing Rolling: Due to the design of the vehicle itself, to prevent unexpected situations such as sudden movement or rolling when starting the engine, automatic transmission vehicles are designed to require pressing the brake to start. If the brake is not pressed, the vehicle cannot successfully start. Manual transmission vehicles are also prone to rolling if the brake is not pressed when starting. Safety Considerations: The gear of an automatic transmission vehicle when starting must be in P (Park) or N (Neutral). If starting in N gear without the handbrake engaged, the vehicle may roll. Therefore, the design of "pressing the brake to start" is entirely for safety considerations.
3
0
Share

Can a car without ETC get on the highway?

Vehicles without ETC can use the manual lane to enter the highway. According to the State Council's regulations, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through the manual lane. Additionally, newly installed ETC devices cannot be used immediately on the highway; they must be activated first. During free holiday periods, vehicles can still use the highway. For vehicles already equipped with ETC, passing through ETC lanes will not incur charges. ETC Billing Principle: There will be one or more ETC lanes on the highway. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane, and using computer networking technology for backend settlement with banks, the system achieves the purpose of allowing vehicles to pass through toll stations without stopping to pay tolls. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and stops, reducing wear and fuel consumption; Improved efficiency: Theoretically, ETC lanes can increase vehicle throughput by 2-3 times, making traditional ETC more advanced, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Integrated Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a clear target in the main indicators of comprehensive transportation development during the "13th Five-Year Plan" period: "By 2020, the ETC usage rate for passenger vehicles on roads should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC usage rate for passenger vehicles, efforts will also be made to promote ETC usage for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage.
18
1
Share

What is the maximum speed limit for electric forklifts?

For forklifts operating within factory premises, the maximum speed must not exceed 4 km/h during operation. For various types of forklifts operating inside factory buildings, the maximum speed must not exceed 2 km/h. Below is more information about forklifts: Introduction: Forklifts are industrial handling vehicles, referring to various wheeled handling vehicles used for loading/unloading, stacking, and short-distance transportation of palletized goods. Application Scope: Industrial handling vehicles are widely used in ports, railway stations, airports, freight yards, factory workshops, warehouses, distribution centers, and logistics hubs. They perform loading/unloading and handling operations for palletized goods in ship cabins, railway cars, and containers, making them essential equipment for pallet transportation and container shipping.
1
4
Share

Where to Use Turn Signals in Subject 2 of the Driving Test?

There are 6 instances where turn signals are required in Subject 2: 1. When starting the vehicle, turn on the left turn signal; 2. When starting on a slope, turn on the left turn signal; 3. During parallel parking, turn on the right turn signal when pulling over to park, stopping 30 cm from the curb before reversing; 4. Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right, causing the front of the car to shift left; 5. Before exiting the parking space during parallel parking, shift into drive gear and turn on the left turn signal, turning it off promptly after exiting; 6. When entering a 90-degree turn, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect turn signal usage are as follows: - Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. - Using turn signals for less than 3 seconds before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Subject 2 is scored out of 100 points, with failing, 20-point, 10-point, and 5-point deduction criteria. To pass the test: ① For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required. The C1 and C2 tests include five mandatory items: reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), 90-degree turns, and S-curves (some regions include a sixth item: highway toll card collection). The A1, A2, A3, B1, and B2 tests include: pole test, slope parking and starting, parallel parking, single-plank bridge, S-curves, 90-degree turns, narrow gate passage, continuous obstacle course, bumpy road driving, narrow road U-turns, and simulations of highways, continuous sharp mountain turns, tunnels, rain/fog, slippery roads, and emergency handling.
19
1
Share

What symptoms will appear if the cylinder head gasket of a new Santana is damaged?

The symptoms of a damaged cylinder head gasket in a new Santana are as follows: Gas leakage between adjacent cylinders: Without opening the decompression, when turning the crankshaft, it can be felt that the pressure in both cylinders is insufficient. When starting the engine, there is a phenomenon of black smoke emission, the engine speed significantly decreases, and the power output appears insufficient. Cylinder head gas leakage: The compressed high-pressure gas leaks into the cylinder head bolt holes or escapes from the joint surface between the cylinder head and the engine block. Light yellow foam can be observed at the leakage site. In severe cases of leakage, a "hissing" sound can be heard, sometimes accompanied by water or oil leakage. During disassembly and inspection, obvious carbon deposits can be seen on the corresponding cylinder head plane and the nearby cylinder head bolt holes.
2
3
Share

What are the functions of the buttons on the Haval H4?

Introduction to the functions of the buttons on the Haval H4 is as follows: Light and wiper buttons: Behind the steering wheel of the Haval H4 are the stalks for light control and wiper adjustment, equipped with automatic headlights and automatic wipers. Safety assistance function buttons: The Haval H4 also features numerous safety assistance functions, including lane change assist, hill descent control, and vehicle stability system. Electronic parking brake button: The Haval H4 is also equipped with an electronic parking brake, featuring an automatic parking function. The electronic parking brake is also known as the Electronic Parking Brake system, abbreviated as EPB. Driving mode button: The Haval H4 also includes driving mode selection, located to the right rear of the gear lever. The driver can switch between different driving modes by selecting through the central display screen's function page or rotating the driving mode knob on the secondary instrument panel. Vehicle characteristics will change accordingly based on the selected driving mode.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.