What Are Some Car Usage Tips?

1 Answers
VanJason
07/29/25 12:32pm
Here are specific explanations about car usage tips: 1. Fully depress the brake and clutch before shifting gears: Many people shift gears before the car comes to a complete stop, sometimes even feeling the impact from the transmission. Doing this once or twice may not affect the vehicle, but prolonged practice can cause irreversible damage to the gears inside the transmission. Additionally, for manual transmission vehicles, always fully depress the clutch before shifting gears to prevent gear grinding, which can easily damage the transmission. 2. Pay attention to the break-in period of a new car: It is recommended to keep the speed below 80 km/h and the engine RPM below 4000 during the break-in period.
Was this review help?
16
3
Share
More Forum Discussions

How long after failing the driving test can I retake it?

If you fail the Subject 3 driving test, you can generally schedule a retake after ten days, depending on the availability of slots at your driving school. Both Subject 2 and Subject 3 retakes require a waiting period of 10 working days before you can book the test. The relevant regulations state: Each subject test can be taken once, and if you fail, you are allowed one retake. If you do not attend the retake or fail the retake, the current test session is terminated, and the applicant must reschedule the test. If you fail the Subject 3 safety and civilized driving knowledge test, the passing score for the road driving skills test remains valid. Within the validity period of the driving skills test permit, the number of retakes for Subject 2 and Subject 3 road driving skills tests cannot exceed five. If you fail the fifth retake, the passing scores for other subjects will be invalidated.
10
5
Share

What is the matching range between each gear and vehicle speed?

The matching range between each gear and vehicle speed is as follows: 1. First gear: The allowable driving range is 0 to 20 kilometers per hour, with the shift to second gear occurring at 15 to 20 kilometers per hour; 2. Second gear: The allowable driving range is 10 to 30 kilometers per hour, with the shift to third gear occurring at 25 to 30 kilometers per hour; 3. Third gear: The allowable driving range is 20 to 40 kilometers per hour, with the shift to fourth gear occurring at 35 to 40 kilometers per hour; 4. Fourth gear: The allowable driving range is 30 to 40 kilometers per hour, with the shift to fifth gear occurring at 45 to 50 kilometers per hour. When driving a manual transmission car, it is crucial to master the timing of gear shifting. Shift gears when the engine speed is around 2000 RPM. During shifting, when the car reaches the required driving speed, release the accelerator pedal and then press the clutch, so the clutch will not be forced to disengage.
18
2
Share

What does the M gear in an automatic transmission car mean?

Automatic transmission car M gear is the manual mode of the automatic manual transmission. When the car is shifted to M gear, it automatically switches to manual transmission mode, similar to manual transmission vehicles, requiring downshifting at low speeds and upshifting at high speeds. Moreover, the M gear can be directly switched from D gear without stopping. Generally, there will be a plus and minus sign next to the M gear transmission, and shifting can be done by pushing the gear lever forward or backward or through steering wheel paddles. However, unlike manual transmissions, there is no need to release the throttle when shifting gears; you can directly shift up or down. But shifting is also limited and will only take effect when performed within safe parameters.
11
0
Share

What does a steering wheel with an exclamation mark on the dashboard mean?

There are two possible reasons for a steering wheel with an exclamation mark on the dashboard: 1. If it's a red exclamation mark, it means the handbrake is not released. Simply release the handbrake to resolve the issue. 2. If it's a yellow exclamation mark, it indicates that the EPS (Electric Power Steering) is not activated. Normally, this symbol lights up before the engine is started, during which the steering wheel feels tight. It disappears immediately after the engine starts, and the steering wheel becomes loose, indicating that the electric power steering function is active. It is normal for the light to go off after startup. Methods for diagnosing and troubleshooting faults: 1. Press the brake pedal several times in succession. If the pedal gradually rises and feels elastic, but after a short pause, pressing the pedal again results in it being very low, this indicates air in the brake system. In this case, the brake system should be bled. 2. If a single brake application is ineffective but pressing the pedal several times in a row improves braking performance, this is usually due to excessive free travel of the brake pedal or excessive brake clearance. Adjust the free travel of the brake pedal and then check the brake clearance. If necessary, disassemble and repair the brake system.
6
4
Share

What is the fuel tank capacity of the Land Cruiser in liters?

The Land Cruiser has a fuel tank capacity of 138 liters. The Land Cruiser is a large SUV produced by Toyota, with body dimensions of 5170mm in length, 1970mm in width, and 1945mm in height. The Land Cruiser is available in two engine displacement models: a 4.0-liter six-cylinder naturally aspirated model with 275 horsepower and a 4.6-liter eight-cylinder naturally aspirated model with 310 horsepower. All models come standard with four-wheel drive and an 8-speed automatic transmission. Exterior features of the Land Cruiser include front and rear bumpers, light green windshield, front fog lights, high-mounted brake lights, xenon headlights with headlight washers, sequential turn signals, aviation pedals, side protection strips, roof rack, and rear spoiler. Additionally, this vehicle is equipped with full-time four-wheel drive, 20-inch alloy wheels, and tires sized 285/50R20.
11
2
Share

Is It Legal to Change from 17-Inch to 18-Inch Wheels?

Changing from 17-inch to 18-inch wheels cannot be registered and is illegal, as modifying wheels to non-original sizes constitutes illegal modification. Below are specific details about car wheels: 1. Working Method: The wheel hub bearing unit is designed to work in conjunction with the anti-lock braking system. The wheel hub unit is designed with inner and outer flanges; the inner flange is bolted to the drive shaft, while the outer flange integrates the entire bearing assembly. 2. Wear Impact: Worn or damaged wheel hub bearings or units can lead to costly failures during vehicle operation and even pose safety hazards. 3. Upgrade Methods: The most common methods for upgrading car wheels include switching to aluminum alloy rims or increasing wheel size to enhance vehicle performance and appearance.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.