What are all the buttons inside the Trailblazer?

1 Answers
EliDella
07/24/25 9:32pm
Chevrolet Trailblazer steering wheel button illustrations are as follows: 1. Left-side buttons primarily control the cruise control function: cruise on, cruise off, resume/accelerate, set/decelerate, and collision warning. 2. Right-side buttons mainly control the multimedia voice system: voice control, left selection, right selection, up/down control knob, and phone hang-up. 3. Steering wheel position adjustment: Generally, the steering wheel adjustment switch is located underneath; pulling the lever allows for adjustment. Pull the lever and manually hold and move the steering wheel to the desired position. Another type is an electric switch, where position adjustment can be done directly at the switch.
Was this review help?
16
0
Share
More Forum Discussions

Is the Trumpchi GM8 equipped with a Toyota engine?

No. The GAC Trumpchi GM8 is equipped with an in-house produced 2.0T engine across all variants, delivering a maximum power of 201ps and a peak torque of 320Nm, paired with a highly regarded Aisin 6-speed automatic transmission, offering robust performance. Below are the relevant details about the Trumpchi M8: 1. Body dimensions: The GAC Trumpchi GM8 measures 5066mm in length, 1923mm in width, and 1822mm in height, with a wheelbase of 3000mm. 2. Vehicle type: The GAC Trumpchi GM8 is an MPV with a fuel tank capacity of 68L and a curb weight of 2002kg. 3. Powertrain: The GAC Trumpchi GM8 features a MacPherson strut front suspension and a multi-link rear suspension, powered by a 2.0T turbocharged engine that produces a maximum horsepower of 201ps, a maximum torque of 320Nm, and a maximum power of 148kw, mated to a 6-speed automatic transmission.
15
2
Share

Can a 16-year-old get a motorcycle driver's license?

16-year-olds cannot obtain a motorcycle driver's license. Below are the relevant requirements for a motorcycle driver's license: Age requirements for a motorcycle driver's license: To apply for a light motorcycle license, the applicant must be between 18 and 70 years old. To apply for licenses for low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. Physical requirements for a motorcycle driver's license: To apply for licenses for large buses, tractors, city buses, large trucks, or trolleybuses, the applicant must be at least 155 cm tall. To apply for a medium-sized bus license, the applicant must be at least 150 cm tall. Color vision: no red-green color blindness. The applicant must be able to distinguish the direction of sound with each ear at a distance of 50 cm from a tuning fork. Those with hearing impairments who can meet the above conditions with hearing aids may apply for a driver's license for small cars or small automatic transmission vehicles.
11
3
Share

Can the car still be used when it shows low tire pressure?

When the car displays low tire pressure, it is necessary to stop using it. Below is relevant information about low tire pressure: Consequences of not stopping use with low tire pressure: It can damage the sidewall cord layers of the tire. If the cord layers are subjected to excessive force, it may lead to a risk of tire blowout. If the vehicle needs to continue driving, the spare tire should be replaced first, then drive to a repair shop to check the cause of the tire pressure loss. Reasons for low tire pressure: The tire tread may be punctured by sharp objects, such as screws, cement nails, or other foreign objects. In this case, tire repair is required. If the tire has not been replaced for a long time, the contact surface between the tire bead and the wheel rim may not be completely sealed, leading to slow air leakage. The rubber of the tire valve may age and crack, causing slow air leakage from the tire.
14
0
Share

Is Starting at 2500 RPM Harmful to an Automatic Transmission Car?

"Starting an automatic transmission car at 2500 RPM can cause damage because the vehicle typically shifts from lower to higher gears during acceleration. 2500 RPM is considered a relatively high engine speed, and if the gear is low while the throttle is high, it can increase engine wear. High engine speed during startup is normal. Generally, the engine speed can reach 1200-1500 RPM at startup. In colder seasons, the engine speed may be even higher because too low an RPM can cause the car to stall, and a slightly higher speed helps warm up the engine faster. However, during a cold start, the RPM should not be excessively high. Since lubricant cannot fully reach the upper parts of the engine, keeping the RPM below 2000 is more suitable to minimize wear. Once the engine stabilizes, the RPM will drop to around 800. If the RPM is too low, fuel combustion in the cylinders may be incomplete, leading to insufficient power and increased carbon buildup in the engine. Over time, this can cause significant damage to the engine. Conversely, if the RPM is too high, the most noticeable effects are increased fuel consumption and greater engine wear."
15
0
Share

Can National II vehicles still be driven on the road?

National II vehicles can still be driven on the road, but they must undergo strict inspections. Below is relevant information about National II vehicles: Requirements for National II vehicles: Since 2018, vehicles below National II standards will be impounded if driven on the road. For household 5-seat sedans and 7-seat SUVs, as well as non-commercial small and mini vehicles, there is no usage lifespan. When the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. After 15 years, the vehicle must undergo inspections twice a year. If it fails the inspection, it will be forcibly scrapped. Reasons for phasing out National II vehicles: Initially, the National VI A emission standard was implemented, and it is expected that the National VI B emission standard will be implemented in 2023. The strict emission standards issued by the state can regulate automakers, encouraging them to produce more environmentally friendly vehicles. As environmental pollution problems become increasingly severe, countries worldwide are introducing stricter emission standards to limit vehicle exhaust emissions. Emission standards that cause significant air pollution will accelerate the phase-out process.
9
0
Share

What Type of Fuel Does the Lynk & Co 01 Require?

The Lynk & Co 01 requires 95-octane gasoline or higher. Meaning of gasoline octane ratings: The octane rating of gasoline represents its octane number. A higher octane rating indicates a higher octane number, which means the gasoline has better anti-knock properties. Better anti-knock properties result in smoother engine operation, reduced wear, and improved engine protection. However, a higher fuel octane rating is not always better. Importance of choosing the right gasoline: If a high-compression engine uses low-octane gasoline, incomplete combustion may occur, leading to severe engine vibration, reduced power output, engine component damage, increased fuel consumption, and poor driving performance. Conversely, if a low-compression engine uses high-octane gasoline, delayed combustion may occur, meaning the fuel does not reach its auto-ignition point at maximum compression. This also results in incomplete combustion, requiring additional fuel injection to maintain power output, which not only offers no benefit to the engine but also increases fuel consumption.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.